radio RENAULT TWINGO 2009 2.G Electrical Equipment User Guide

86A-7
RADIO
Tweeter: Removal - Refitting
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the tweeter speaker using the (Car. 1363) po-
sitioned at (1) or at (2) .
aDisconnect the tweeter speaker.
aRemove tweeter .
aSeparate the tweeter speaker grille from the tweeter
speaker.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aClip the tweeter speaker grille onto the tweeter
speaker.
aConnect the tweeter speaker.
aClip on the tweeter speaker.Special tooling required
Car. 1363Set of tr im removal levers.
121159

86A-8
RADIO
Front speakers: Removal - Refitting
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the front side door trim (see Front side
door trim: Removal - Refitting) (MR 412, 72A,
Side opening element trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the front speaker bolts.
aExtract the front speaker.
aDisconnect the front speaker connector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aConnect the front speaker connector.
arefit:
-the front speaker,
-the front speaker bolts.
II - FINAL OPERATION.
aRefit the front side door trim (see Front side door
trim: Removal - Refitting) (MR 412, 72A, Side ope-
ning element trim).
120280

86A-9
RADIO
Rear speakers: Removal - Refitting
WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the rear parcel shelf side trim (see Rear parcel
shelf side trim: Removal - Refitting) (MR 412,
71A, Body internal trim),
-the rear panel trim (see Rear panel lining: Remo-
val - Refitting) (MR 412, 71A, Body internal trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the rear speaker bolts (1) ,
-the rear speaker (2) .
aDisconnect the rear speaker connector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aConnect the rear speaker connector.
aRefit:
-the rear speaker,
-the rear speaker bolts.II - FINAL OPERATION.
aRefit:
-the rear panel trim (see Rear panel lining: Remo-
val - Refitting) (MR 412, 71A, Body internal trim),
-the rear parcel shelf side trim (see Rear parcel
shelf side trim: Removal - Refitting) (MR 412,
71A, Body internal trim).
121064

86A-10
RADIO
Display: Removal - Refitting
RADIO NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
aIn the event of a replacement operation, carry out
the necessary operations (see Fault finding - Re-
placement of components) (MR 413, 83A, Instru-
ment panel).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the instrument panel (1) (see 83A, Instru-
ment panel, Instrument panel: Removal - Refit-
ting, page 83A-1) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the instrument panel (see 83A, Instrument pa-
nel, Instrument panel: Removal - Refitting, page
83A-1) .II - FINAL OPERATION.
aIn the event of a replacement operation, carry out
the necessary operations (see Fault finding - Re-
placement of components) (MR 413, 83A, Instru-
ment panel).
Note:
The radio display is built into the instrument
panel and cannot be separated.
121084

86A-11
RADIO
Radio control satellite: Removal - Refitting
WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the rev counter (see 83A, Instrument pa-
nel, Rev counter: Removal - Refitting, page 83A-
3) .
aRemove the lower cover bolts (1) .aUnclip the upper cover at (2) .
aRemove the upper cover (3) .
aRemove the lower cover (4) . ENGINE REV COUNTER
127437
127438
127439

86A-12
RADIO
Radio control satellite: Removal - Refitting
WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO NO. 03
86A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the connector (5) from the radio control
satellite.
aRemove:
-the bolt (6) from the radio control satellite,
-the radio control satellite (7) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the radio control satellite on the steering colu-
mn switches.
aConnect the radio control satellite connector.
II - FINAL OPERATION.
aRefit:
-the lower cover,
-the upper cover.
aRefit the rev counter (see 83A, Instrument panel,
Rev counter: Removal - Refitting, page 83A-3) .
121134
ENGINE REV COUNTER

86A-13
RADIO
Offset multimedia socket: Removal - Refitting
RADIO NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the radio (see 86A, Radio, Radio: Removal - Re-
fitting, page 86A-4) ,
-the centre console (see Centre console: Removal
- Refitting) (MR 412, 57A, Interior equipment),
-the centre front panel (see Centre front panel: Re-
moval - Refitting) (MR 412, 57A, Interior equip-
ment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aMark the routing of the offset audio socket wiring (1)
behind the radio.
aRemove:
-the bolts (2) ,
-the offset audio connection.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the offset audio connection,
-the offset audio socket bolts.
aFit the wiring of the offset audio socket in the posi-
tion marked during the removal operation.II - FINAL OPERATION.
aRefit:
-the centre front panel (see Centre front panel: Re-
moval - Refitting) (MR 412, 57A, Interior equip-
ment),
-the centre console (see Centre console: Removal
- Refitting) (MR 412, 57A, Interior equipment),
-the radio (see 86A, Radio, Radio: Removal - Re-
fitting, page 86A-4) .
121381

86B-1
CAR PHONE
Car phone: List and location of components
HANDS-FREE TELEPHONE KIT
86B
I - LIST OF COMPONENTS
The « car phone » consists of:
-a telephone aerial
-a computer
-a "hands-free" microphone
-a telephone control on the steering wheel
II - LOCATION OF COMPONENTS
Telephone aerial
To remove the telephone aerial (see 86A, Radio, Ra-
dio aerial: Removal - Refitting, page 86A-5) .
Computer
The computer is secured under the glovebox by a self-
fastening strip."Hands-free" microphone
Telephone control on the steering wheel
To remove the car phone control on the steering wheel
(see 86A, Radio, Radio control satellite: Removal -
Refitting, page 86A-11) .
121087
132408
132406
109918

88A-28
WIRING HARNESS
Engine wiring: Removal - Refitting
D4F or D7F
88A
-the fuel vapour absorber connector (3) ,
-the ignition coil connector (4) ,
-the upstream oxygen sensor connector (5) ,
-the downstream oxygen sensor connector (6) ,
-the reversing lights switch connector (7) ,
-the radio interference suppressor connector (8) ,
-the alternator connector (11) ,
-the engine harness/injection wiring connector (12) ,
-the air inlet temperature sensor connector (13) ,
-the pinking sensor connector (14) ,
-the air inlet pressure sensor connector (15) ,
-the motorised throttle valve connector (16) ,
-the coolant temperature sensor connector (17) ,
-the crankshaft position sensor connector (18)
-the petrol injection computer connectors (19) ,
-the engine harness/front of engine wiring connec-
tor (20) .
aDisconnect the cooling fan assembly connector (21)
.aDisconnect:
-the engine cooling fan assembly connector (22) ,
-the engine cooling fan assembly resistor connector
(23) ,
-the refrigerant fluid pressure sensor connector (9) ,
-the air conditioning compressor connector (10) .
aRemove:
-the alternator earth wiring nut (24) ,
-the nuts from the starter supply and earth terminals
(25) ,
-the engine earth wiring nuts (26) ,
-the earth wiring nut on the front left-hand side
member (27) ,
-the positive battery terminal wiring nut (28) ,
-the negative battery terminal wiring nuts (29) ,
-the wiring mounting nut on the battery protection
fuse board (30) ,
-the engine compartment connection unit supply
terminal nut (31) .
aUnclip:
-the section of wiring on the cylinder head, STANDARD HEATING
122359
AIR CONDITIONING
125249

88A-31
WIRING HARNESS
Engine wiring: Removal - Refitting
D4F or D7F
88A
-the fuel vapour absorber connector (33) ,
-the ignition coil connector (34) ,
-the radio interference suppressor connector (35) ,
-the oil pressure sensor connector (36) ,
-the downstream oxygen sensor connector (37) ,
-the upstream oxygen sensor connector (38) ,
-the reverse gear switch connector (39) ,
-the motorised throttle valve connector (40) ,
-the alternator connector (43) ,
-the pinking sensor connector (44) ,
-the engine harness/injection wiring connector (45) ,
-the crankshaft position sensor connector (46) ,
-the coolant temperature sensor connector (47) ,
-the petrol injection computer connectors (48) ,
-the engine harness/front of engine wiring connec-
tor (49) .
aDisconnect the cooling fan assembly connector (50)
.aDisconnect:
-the engine cooling fan assembly connector (51) ,
-the engine cooling fan assembly resistor connector
(52) ,
-the refrigerant fluid pressure sensor connector (41)
,
-the air conditioning compressor connector (42) . STANDARD HEATING
122359
AIR CONDITIONING
125249