© Renault s.a.s 2007 "The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the manufacturer in
the production of the various component units and accessories from which the vehicles are
constructed".All rights reserved by Renault.
Copying or translating, in part or in full, of this document or use of the service part reference
numbering system is forbidden without the prior written authority of Renault.
JUNE 2009 EDITION ANGLAISE
X44
6Sealing and soundproofing
65AOPENING ELEMENT SEALING
66AWINDOW SEALING
TWINGO - Section 6
Contents
Pages
TWINGO - Section 6 ContentsPages
65A OPENING ELEMENT SEALING
Door sealing film: Removal -
Refitting 65A-1
Side opening elements
double seal: Removal -
Refitting 65A-4
66A WINDOW SEALING
Front side door window run
channel: Removal - Refitting 66A-1
Front side door exterior
weatherstr ip: Removal -
Refitting 66A-2
66A-1
WINDOW SEALING
Front side door window run channel: Removal - Refitting66A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the door mirror (see Door mirror: Removal - Re-
fitting) (MR 412, 56A, Exterior equipment),
-the front side door exterior weatherstrip (see 66A,
Window sealing, Front side door exterior wea-
therstrip: Removal - Refitting, page 66A-2) .
-the front side door trim (see Front side door trim:
Removal - Refitting) (MR 412, 72A, Side opening
element trim).
-the front side door window (see Front side door
window: Removal - Refitting) (MR 412, 54A,
Windows).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aPartially remove the upper section (1) of the front
side door run channel.aRemove the front door window run channel at (2)
and (3) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the front door window run channel.
II - FINAL OPERATION.
aRefit:
-the front side door window (see Front side door
window: Removal - Refitting) (MR 412, 54A,
Windows),
-the front side door trim (see Front side door trim:
Removal - Refitting) (MR 412, 72A, Side opening
element trim).
-the front side door exterior weatherstrip (see 66A,
Window sealing, Front side door exterior wea-
therstrip: Removal - Refitting, page 66A-2) .
-the door mirror (see Door mirror: Removal - Re-
fitting) (MR 412, 56A, Exterior equipment).
121167
121168
66A-2
WINDOW SEALING
Front side door exterior weatherstrip: Removal - Refitting66A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aLower the front side door window.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aGently push the exterior weatherstrip towards the
top of the door (1) .
aRemove the exterior weatherstrip towards the rear
of the door (2) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aInsert the exterior weatherstrip under the door mir-
ror.
aRefit the exterior weatherstrip in position.
II - FINAL OPERATION.
aRaise the front side door window.
aCheck that the exterior weatherstrip is in the correct
position.
119286
