tailgate RENAULT TWINGO 2009 2.G Trim And Upholstery Workshop Manual

TWINGO - Section 7
Contents
Pages
TWINGO - Section 7 ContentsPages
71A BODY INTERNAL TRIM
Floor car pet: Removal -
Refitting 71A-1
Luggage compartment
carpet: Removal - Refitting 71A-3
Headlining: Removal -
Refitting 71A-4
Front door sill lining:
Removal - Refitting 71A-7
Rear wheel arch trim:
Removal - Refitting 71A-8
Windscreen pillar trim:
Removal - Refitting 71A-9
B-pillar upper tr im: Removal -
Refitting 71A-10
Quar ter panel trim: Remo val
- Refitting 71A-12
Rear panel lining: Removal -
Refitting 71A-14
Rear parcel shelf side trim:
Removal - Refitting 71A-15
Rear loading trim: Removal -
Refitting 71A-16
72A SIDE OPENING ELEMENT TRIM
Front side door trim:
Removal - Refitting 72A-173A NON-SIDE OPENING ELEMENTS TRIM
Tailgate trim: Removal -
Refitting 73A-1
75AFRONT SEAT FRAMES AND
MECHANISMS
Front seat base frame:
Removal - Refitting 75A-1
Front seatback frame:
Removal - Refitting 75A-2
Front seat runner: Removal -
Refitting 75A-6
Complete front seat:
Removal - Refitting 75A-8
76A REAR SEAT FRAMES AND MECHANISMS
Complete rear seat: Removal
- Refitting 76A-1
Folding rear seat frame:
Removal - Refitting 76A-3
Rear seat r unner: Removal -
Refitting 76A-4
Rear bench seatback:
Removal - Refitting 76A-5
Rear bench seat base:
Removal - Refitting 76A-6

71A-4
BODY INTERNAL TRIM
Headlining: Removal - Refitting
71A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aLock the airbag computer using Diagnostic tool
(see Fault finding - Replacement of components)
(MR 413, 88C, Airbags and pretensioners).
aDisconnect the battery (see Battery: Removal - Re-
fitting) (MR 411, 80A, Battery).
aPartially remove the front side door and tailgate
seals.aUnclip the trim piece (1) from the sun visor shutter
cross member mounting.
aRemove:
-the finishing seal (2) from the sunroof
-the sunroof switch plate (see Sunroof switch: Re-
moval - Refitting) (MR 411, 87D, Electric window
winders - Sunroof).
aRemove:
-the interior lights (see Interior light: Removal -
Refitting) (MR 411, 81B, Interior lights),
-the sun visors (see Sun visor: Removal - Refit-
ting) (MR 412, 57A, Interior equipment),
-the windscreen pillar trims (see 71A, Body inter-
nal trim, Windscreen pillar trim: Removal - Re-
fitting, page 71A-9) ,
-the rear bench seatback (depending on equipment
level) (see 76A, Rear seat frames and mecha-
nisms, Rear bench seatback: Removal - Refit-
ting, page 76A-5) (MR 412, 76A, Rear seat frame
and runners),
-the rear parcel shelf side trim panels (see 71A,
Body internal trim, Rear parcel shelf side trim:
Removal - Refitting, page 71A-15) ,
-the rear panel trims (see 71A, Body internal trim,
Rear panel lining: Removal - Refitting, page
71A-14) , Equipment required
Diagnostic tool
IMPORTANT
To avoid any risk of triggering when working on or
near a pyrotechnic component (airbags or preten-
sioners), lock the airbag computer using the dia-
gnostic tool.
When this function is activated, all the trigger lines
are inhibited and the airbag warning light on the ins-
trument panel lights up contin uously (ignition on).
IMPORTANT
Never handle the pyrotechnic systems (pretensio-
ners or airbags) near to a source of heat or naked
flame - they may be triggered.
OPENING ROOF
121712

71A-6
BODY INTERNAL TRIM
Headlining: Removal - Refitting
71A
aRefit the headlining (this operation requires two peo-
ple).
aRefit clips (4) .
III - FINAL OPERATION.
aRefit the interior light and sunroof wiring harnesses
(depending on equipment level).
aConnect the interior light and sunroof connectors (3)
(depending on equipment level).
aRefit:
-the interior lights (see Interior light: Removal -
Refitting) (MR 411, 81B, Interior lights),
-the sun visors (see Sun visor: Removal - Refit-
ting) (MR 412, 57A, Interior equipment),
-the windscreen pillar trims (see 71A, Body inter-
nal trim, Windscreen pillar trim: Removal - Re-
fitting, page 71A-9) ,
-the rear quarter panel trims (see 71A, Body inter-
nal trim, Quarter panel trim: Removal - Refit-
ting, page 71A-12) .
-the B-pillar upper trims (see 71A, Body internal
trim, B-pillar upper trim: Removal - Refitting,
page 71A-10) ,
-the rear panel trims (see 71A, Body internal trim,
Rear panel lining: Removal - Refitting, page
71A-14) ,
-the rear parcel shelf side trim panels (see 71A,
Body internal trim, Rear parcel shelf side trim:
Removal - Refitting, page 71A-15) ,
-the rear bench seatback (depending on equipment
level) (see 76A, Rear seat frames and mecha-
nisms, Rear bench seatback: Removal - Refit-
ting, page 76A-5) (MR 412, 76A, Rear seat frame
and runners),aRefit:
-the sunroof switch plate (see Sunroof switch: Re-
moval - Refitting) (MR 411, 87D, Electric window
winders - Sunroof),
-the sunroof finishing seal (2) .
aFit the sun visor headlining cross member mounting
trim piece (1) .
aRefit the front side door and tailgate seals.
aConnect the battery (see Battery: Removal - Refit-
ting) (MR 411, 80A, Battery).
aUnlock the airbag computer using Diagnostic tool
(see Fault finding - Replacement of components)
(MR 413, 88C, Airbags and pretensioners). OPENING ROOF
OPENING ROOF

71A-15
BODY INTERNAL TRIM
Rear parcel shelf side trim: Removal - Refitting
71A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aPartially remove the tailgate seal.
aRemove the bolts (1) .
aDetach the rear parcel shelf side trim.
aDisconnect the luggage compartment light.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aConnect the luggage compartment light.
aClip on the rear parcel shelf side trim.
aRefit:
-the bolts (1) ,
-the tailgate seal.
121066

71A-16
BODY INTERNAL TRIM
Rear loading trim: Removal - Refitting
G44
71A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the clips (1) ,
-the rear parcel shelf (2) ,
-the luggage compartment carpet.aTilt the front seat backrest.
aRemove:
-the bolts (3) ,
-the partition panel.
aPartially remove the tailgate seal.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the bolts (4) ,
122850
122849
122845

71A-17
BODY INTERNAL TRIM
Rear loading trim: Removal - Refitting
G44
71A
-the retaining hooks.
aRemove:
-the bolts (5) ,
-the clip (6) .
aRemove:
-the bolts (7) ,
-the rear panel trim,
-the rear floor attached to the front section (see
Raised rear floor, front section: Removal - Re-
fitting) (MR 412, 41D, Rear lower structure).REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the rear floor attached to the front section (see
Raised rear floor, front section: Removal - Re-
fitting) (MR 412, 41D, Rear lower structure),
-the rear panel trim,
-the bolts (7) ,
-the clip (6) ,
-the bolts (5) ,
-the retaining hooks,
-the bolts (4) .
II - FINAL OPERATION.
aRefit:
-the tailgate seal,
-the partition,
-the bolts (3) ,
-pull down the front seat backrest,
-the luggage compartment carpet,
-the rear parcel shelf (2) ,
-the clips (1) .
122846
122853

73A-1
NON-SIDE OPENING ELEMENTS TRIM
Tailgate trim: Removal - Refitting
73A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the bolt (1) .
aUnclip the tailgate trim.
REFITTING
I - REFITTING PREPARATIONS OPERATION
aReplace the tailgate trim clips if necessary.
II - REFITTING OPERATION FOR PART
CONCERNED
aClip the tailgate trim in place.
aRefit the bolt (1) .
119287