seat memory RENAULT TWINGO 2012 2.G Owners Manual

1.14
ENG_UD30508_8
Sièges avant (X44 - Renault)
ENG_NU_952-4_X44_Renault_1
FRONT sEATs (2/2)
Access to the rear seats
Move handle 4 or 6 (depending on the
vehicle), move the seat back and slide
the seat forwards.
To return the seat to its original position
(as stored in the memory, depending on
the vehicle) on the driver’s side, slide
the seat backwards until it locks.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts is
not reduced.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
Make sure that the seatbacks are
correctly locked in place.
Check that no object or
person prevents the front
seat from locking. If so,
r e m o v e a n y o b s t a c l e s
behind the front seats. Adjust the
seat to allow sufficient room in the
rear. The rear occupants/objects
should then return to the vehicle.
Repeat the above until the seat is
locked correctly.
Risk of seat moving on its runners
during vehicle acceleration or brak-
ing.
Do not move handle 2 and handle 4
or 6 at the same time.
4
2
6