service RENAULT TWINGO 2017 3.G Radio Connect R And Go User Manual

GB.29
MAKING, RECEIVING A CALL (2/3)
During a call
You can:
– adjust the volume by pressing 17
and 19 on the steering column
control;
– hang up by pressing 10 on the
system front panel or 18, 21 or 27 on
the steering column control, or 28 on
the steering wheel;
– confirm by pressing 5 on the system
front panel or 20 on the steering
column control.
Receiving a call
When receiving a call, the caller’s
number is displayed on the screen (this
function depends on the options you
have subscribed to with your service
provider).
If the caller’s number is in one of the
memories, the name of the caller is dis-
played instead of the number.
If the caller number cannot be dis-
played, the message “Private number”
is displayed on the screen.
Incoming call
31333430313532
To accept a call, press button 28 on the
steering wheel or 18, 21 or 27 on the
steering column control, or select 30 by
turning and pressing 5.
To reject a call, press and hold 28 on the
steering wheel or 18, 21 or 27 on the
steering column control, or select 31 by
turning and pressing 5.

GB.38
The navigation function includes all
the satellite navigation features, road
maps, traffic information, navigation
applications and warning areas.
This system incorporates the following
functions:
76 Navigation application for route planning.
77 The “Go To My Car” feature to find the current location of your vehicle.
78 Choice of the navigation application used.
R & GO: GENERAL DESCRIPTION (5/7)
84 Access to “My Renault” services.
85 Access to the owner’s handbook for your vehicle.“Car” function
The vehicle function includes man-
agement of certain equipment such as
the vehicle’s computer and the Eco²
Driving.
This system performs the following
functions:
79 Driving eco².
80 Fuel consumption.
81 Access to the other menus.
82Rev counter (rpm x 1000).
83 “Services” displays the dashboard information.
7980
8281
76778384
85
78

GB.46
Main Menu
3D map
Find POIs
Hide the My Destinations
Welcome
R & GO: NAVIGATION FUNCTION (1/2)
Map key
The information displayed below may
vary:
37 Telephone information (notifications,
network, battery and Bluetooth®
connection).
38 Current time.
40 Information regarding your route.
73 - short press: back to the previous menu;
– long press: back to the home page.
90 Points of Interest (POI).
91 Navigation map.
92 Audio source shortcut.
93 Zoom in and out.
94 Speedometer.95 Route calculated by the navigation system.
96 Access to the driving menu.
97 Compass.
98 Driving menu.
Introduction to the
«Navigation» menu
To access the navigation menu, from
the main menu press the «Menu» icon,
then «Navigation».
The «Navigation» menu consists of
two large icons, which can be used to
access:
– the “CoPilot” navigation application for route management;
– the “Find my vehicle” application to suggest the route to take to access
your vehicle.

”CoPilot” navigation
application
From the “Navigation” menu, press the
“CoPilot navigation application” icon.
The “CoPilot” navigation system en-
ables you to enter a destination, choose
points of interest, configure your travel
mode, access information services in
real time, and more.
14:32
37
95
377392
9393
3891
< 8 km/h
90
Continue for 1.2 km to-
wards Trappes (D36)
97
For safety reasons, carry
out any adjustments when
the vehicle is stationary.
9694
98
Address compassHide the
speed
4040

GB.48
A journey has to be more than 400
metres to be taken into account. If the
time between the stopping and starting
the engine is less than four hours, the
application continues to take the jour-
ney into account before stopping.
R & GO: VEHICLE FUNCTION (1/3)
“Driving eco²”
from the “Car” menu, press the “Driving
eco²” icon. The “Driving eco²” function
displays a real-time overall score that
reflects your driving style.
This score takes the following criteria
into account:
– acceleration;
– the ability to anticipate braking;
– compliance with speed limits.
You can see your overall score and
personalised advice at the end of every
trip.
You can also check:
– the distance travelled without bur- ning fuel;
– the scores for your last ten trips.
Note: depending on the phone, the
“Driving eco²” application no longer
records your scores in the background.
NB: Press the “Reset” button on the in-
strument panel to start a new journey
once the application has launched.Introduction to the «Car»
menu
To access the «Car» menu, from the
main menu, press the «Menu» icon,
then «Car».
The system is made up of four main
sections, all of which can be accessed
from the vehicle menu:
– Driving eco² ;
– fuel consumption;
– rev counter (rpm x 1000);
– “Services” displays the dashboard information;
– “My Renault”.
For safety reasons, carry
out any adjustments when
the vehicle is stationary.

GB.49
R & GO: VEHICLE FUNCTION (2/3)
«Rev counter»
From the «Car» menu, press the «Rev
counter» icon.
This function allows you to view the
revolutions of your vehicle in real time
(rpm x 1,000).«Fuel consumption»
From the «Car» menu, press the «Fuel
consumption» icon.
This function displays the instanta-
neous fuel consumption compared to
the average consumption of your vehi-
cle.«Services»
From the «Car» menu, press the
«Services» icon.
The «Services» menu gives you access
to the following:
– data recorded on the dashboard (av- erage speed, average fuel consump-
tion, total distance and distance trav-
elled since last reset);
– “E-guide”, to consult the driver's handbook.

GB.50
R & GO: VEHICLE FUNCTION (3/3)
“MYRENAULT”
from the “Car” menu, press the
“MYRENAULT" icon.
The “MYRENAULT” menu allows
access to customised services on the
Renault® website.
Note: to access «MYRENAULT» and
benefit from its services, you must ins-
tall the «MYRENAULT» application on
your phone.
If the application is not installed, a mes-
sage appears asking you to install it.
For safety reasons, carry
out any adjustments when
the vehicle is stationary.