oil level SAAB 9-5 2002 User Guide

237 Car care and technical information
4Inspect the undercoating and touch
up if necessary.
Pay particular atten-
tion to the fenders and wheel housings,
which are exposed to abrasion by flying
gravel, etc. If the composition has worn
or flaked off, the steel must be thor-
oughly cleaned and dried before a fresh
coat is applied. The cleaning is best
done with a scraper and a steel wire
brush, followed by washing with solvent.
Apply the new coating thinly, as other-
wise it may run off or fall off when dry.
For long tripsBefore setting off on a long journey, it is
advisable to have your car checked over by
your Saab dealer.
Obtain a few important items to take along
on your journey such as spare bulbs, wiper
blades, fuses, a Poly-V-belt and the like.
You can check some points yourself before-
hand:
 Make sure that the engine is in good con-
dition.
 Check that no oil or gasoline leaks out of
the engine or gearbox/transmission.
 Check the coolant and power steering
fluid levels. Check also for leaks.
 Inspect the Poly-V-belt and replace it if it
shows any signs of hard wear.
 Check the battery charge.
 Check the tires for tread pattern and air
pressure, including the compact spare
wheel.
 Check the brakes.
 Check all bulbs.
 Check for the presence of the tool kit and
the jack in the car.
Recovery and/or
recycling of automotive
materialsA typical car consists of metals (65–75%),
plastics (10–14%), rubber (5%) and small
quantities of glass, wood, paper and tex-
tiles.
Some of these materials can be recycled,
while others can be recovered in chemical
processes for reuse in new products or as a
source of energy.
While the Saab 9-5 was still at the draw-
ing-board stage, Saab engineers were
giving serious consideration to how the
maximum quantity of materials could be
reclaimed from the car on its eventual
scrapping. To facilitate sorting, plastic parts,
for instance, have been marked to identify
the precise nature of the plastic.
Approximately 90% of the materials in the
car can be recycled or recovered, where
facilities exist.
Before the car is scrapped, all the oils and
other fluids that could pollute the environ-
ment should be recovered from the car. It
may be of interest in this context to learn that
the refrigerant used in the Saab 9-5’s ACC
systems (R134a) contains neither CFCs nor
any other chlorine compounds.
ProCarManuals.com

251 Specifications
Engine oilOil recommendation:

We recommend the use of oils that are available from your
Saab dealer, for regular oil changes. These oils fulfill the most
stringent requirements set by API and ACEA classifications.
Basic recommendations for Saab engines:
SAE 5W-30 or 0W-30, 5W-40.
The oil should be semi or fully synthetic and fulfill grade require-
ments for ACEA A3/B3, API SJ or higher. In addition to API and
ACEA the ILSAC GF-3 specification is approved for use in appli-
cable markets.
Fully synthetic oils with viscosity’s 0W-40/50 of well known
brands and fulfilling minimum ACEA A3/B3 are also recom-
mended, especially for extreme driving conditions.Oil specification.
Oil for gasoline engines is classified by the API (American Petro-
leum Institute) and ACEA (European Automobile Manufacturers
Associations) standards.
API classifies engine oil into grade classes SH (since 1993) and
SJ (since 1996). The SJ class fulfils more stringent requirements
and has lower phosphorous level. A new grade API SL, intro-
duced 2001, fulfils even higher requirements.
These grade classes are most often combined with correspond-
ing classes for diesel engines. The class designations for diesel
engines begins with the letter "C" (Commercial). For example a
grade combination suitable for both types of engine could be API
SH/CD, SJ/CF or SL/CF.
Under the ACEA nomenclature, oils are divided into Class A for
gasoline engines and Class B for diesel engine passenger cars.
There is a further class for heavy diesel engines. Each class is
divided into grades: 1,2 and 3 where grades 2 and 3 normally
encompass semi- and fully synthetic oils. The diesel class also
has a fourth grade, B4, which encompasses tests and regula-
tions aimed at improving the performance of direct injection die-
sel engines.
In the same way as in the API system, gasoline and diesel
engine specifications are combined for products that can be
used in both types of engine. For example, a grade designation
could be ACEA A2/B2 or ACEA A3/B3, B4.
ProCarManuals.com

262 IndexDoor handles
____________________ 38
Door mirrors ___________________ 123
Doors, locks & luggage compartment
_37
Drive belt
______________________ 253
Drive belt, alternator
_____________ 201
Drive belts, length
_______________ 253
Driver’s seat, programmable
_______ 120
Driving in hot weather
____________ 173
Driving with a load
_______________ 178
EElectric heating seat
_____________ 121
Electric heating, front seats
________ 121
Electric windows
________________ 125
Electrical system, technical data
____ 253
Electrically heated rear seat
_______ 121
Electronic Stability Program, ESP
___ 168
Electronic starting interlock
_________ 39
Emergency operation of sunroof
____ 127
Emission control systems
_________ 191
Engine bay, 3.0t V6
______________ 190
Engine bay, 4-cyl
_______________ 189
Engine bay, cleaning _____________ 233
Engine number
_________________ 257
Engine oil, grade ________________ 251
Engine, description _________ 192
, 193
Engine, technical data
____________ 250
Engine, temperature gauge
________ 57
Engine-oil level, checking
_________ 193
Expansion tank, coolant
__________ 196
FFault codes, Audio System
________103
Flat spot, tire
___________________230
Fluid level, automatic transmission
__195
Folding the rear seat, 9-5 Sedan
____132
Folding the rear seat, 9-5 Wagon ___135
Frequently asked questions on airbag
35
Front fog lights
__________________68
Frost warning
___________________60
Fuel
__________________________152
Fuel consumption
________________59
Fuel filler flap
___________________143
Fuel gauge
_____________________57
Fuel grade _____________________250
Fuse box under hood
____________220
Fuse panel
____________________216
Fuses
________________________216
GGearbox number
________________257
Gearbox oil, checking
____________195
Gearbox, technical data, __________254
Glove compartment
______________129
HHandbrake
_____________________185
Hazard warning lights
_____________68
Head restraint
___________________18
Headlight flasher _________________65
Headlights
______________________65Holidaying abroad
______________ 237
Hood
________________________ 188
Horn _________________________ 122
IIgnition switch
_________________ 146
Immobilizer
____________________ 39
Indicator and warning lights
________ 50
Indicator lights
__________________ 50
Instrument illumination
___________ 67
Instruments and controls __________ 49
Integral child seat
_______________ 27
Interior equipment ______________ 117
Interior lighting
__________________ 69
Interior rearview mirror
__________ 123
JJack
_________________________ 228
KKey
__________________________ 38
Key to chassis number
__________ 258
Key, remove
__________________ 146
LLATCH (child safety)
_____________ 20
Labels
_________________________ 8
Leather upholstery, care of
_______ 232
Light horn
_____________________ 65
ProCarManuals.com