If and when 366
To replace the tailgate light bulbs
Complete operations only in the sequence given:
Fig. 219 On the boot lid:
Remove the cover.
Fig. 220 On the boot lid:
Remove the lamp holder.
1.Always take the checklist into account and take the necessary
actions Ÿpage 361.
2.Open the tailgate Ÿpage 97.
3.Extract the cover carefully using the flat part of the screwdriver as a
lever ( Ÿpage 354, fig. 207) on the indent Ÿfig. 219 .
4.Release the lamp holder connector by pulling on the red connector
block.
5.Press on the attachment tabs in the direction of the arrow
Ÿfig. 220 and pull out the lamp holder.
6.Replace the faulty bulb by a new identical bulb.
7.Install the lamp holder. The attachment tabs should audibly click
into place.
8.Insert the cover. The cover should lock into place.
A1
If and when367
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
To replace the tail light bulbs
Complete operations only in the sequence given.Removing the tail light units
Complete operations only in the sequence given:
Fig. 221 On the side of the luggage compartment: To
remove the left and right hand side tail lights. remove
the cap; attachment screw.A1A2
Fig. 222 Tail lights on
bodywork: To remove the
lamp holder. to :
Attachment tab.
A1A4
Rear light, leftRear light, right
1.Always take the checklist into account and take the necessary
actions Ÿpage 361.
2.Open the tailgate Ÿpage 97.
3.Open the storage compartments
on the left-hand side of the lug-
gage compartment Ÿpage 162.Move the 12 V socket support by
pressing gently downwards
Ÿfig. 221 (arrow).
4.Rotate the cap Ÿfig. 221 90°
in the direction of the arrow and
remove it.
AB
A1