seats Seat Alhambra 2020 User Guide

Seats and headrests
Fig. 134
Fitting the headrests in the second or
third row of seats Removing and fitting the front headrests
without l
ongit
udinal adjustment

Seats and headrests
Initialising the seat position memory
The position memory syst em must be r
estar
-
t
ed if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory buttons can then be reprogrammed
and the vehicle keys re-assigned.

Seats and headrests
Folding the backrest of the front passen-
ger seat f orw
ard

Operation
Fig. 142
Remove the shelf supports A then put
them aw ay saf
ely B. The rear shelf can be fitted behind the sec-
ond or thir
d ro
w of seats

Transport and practical equipment
down or repositioning the seats, remove
the attachment elements and supports f
or
the net fr
om the rail system. Fastening rings*
Fig. 145
In the luggage compartment: fasten-
ing rings. There are fastening rings

Transport and practical equipment
Fig. 148
Release the baggage net If the seats in the third row are to be occupied
by passengers then att
achment el
ements
shoul d ne
v
er be placed in the section of the
rails close to the seats

Operation
CAUTION
The baggage net supports placed on the
rail system can be damaged when fol ding
do
wn seats from the third row or putting
them back into position and these can also
damage the seats themselves. Before fold-
ing down or repositioning the seats, remove
the baggage net supports from the rail sys-
tem. Luggage net*
Fig. 149
In the luggage compartment: net for
hanging luggage .The baggage net can be used to secure
light
er items.
Hooking the baggage net int o the boot
fl oor

Air conditioning
the rear centre console. These controls are
used t o mak
e the appr opriat
e settings f
or the
rear seats.
Automatic mode 
Automatic adjustment of temperature, fan,
and air distribution. Automatic mode is disa-
bled when the ventilation is modified manual-
ly.
Cooling mode 
Press the button to switch on or off the cool-
ing system.
Temperature 1 /
2 The temperature of the right and left sides
can be adjust
ed separ
ately using the adjust
-
ers. The sel

ected temperature is shown on
the display of the climate control panel.
Synchronisation: press button  so that
settings on the driver

Driving
Ignition and start button* Fig. 234
In the centre console: Start button of
the K eyless Access l
ocking and st arting sys-
t
em. The layout in right-hand drive vehicles is
symmetrical. The engine can be started with a start button
(Pr
ess & Driv
e). To do so
, ther

e must be a valid
key inside the vehicle in the area of the front
or rear seats, or on the centre console.
In vehicles with the Keyless Access

Indications about the technical data
Engine specifications Petrol engines
1.4 TSI Start-Stop
Power output in kW (PS) at 1/min 110 (150)/5,000-6,000
Maximum torque (Nm at 1/min) 250/1,500-4,000
No. of cylinders/displacement (cm 3
) 4/1,395
Fuel Super 95 / Normal 91 (with a slight power loss) ROZ
Gearbox manualDSG
Top speed (km/h) 200 (VI)198 (VI)
Acceleration from 0-100 km/h (seconds) 9.99.9
Maximum authorized weight (kg) (5/7 seats) 2,300 / 2,4302,310 / 2,430Diesel engines
2.0 TDI CR Start-Stop
Power output in kW (PS) at 1/min 110 (150)/3,500130 (177)/3,500-4,000
Maximum torque (Nm at 1/min) 340/1, 750-3,000380/1, 750-2,500
No. of cylinders/displacement (cm 3
) 4/1,9684/1,968
Fuel Diesel according to standard EN 590, min. 51 CN
Gearbox manualDSGDSGDSG 4Drive
Top speed (km/h) 198 (VI)198 (VI)210 (VI)208 (VII)
Acceleration from 0-100 km/h (seconds) 10.610.3 9.39.1
Maximum authorized weight (kg) (5/7 seats) 2,390 / 2,5202,410 / 2,5402,390 / 2,540 2,560 / 2,590 357