diode Seat Altea 2006 Owner's Manual

If and when
248Tu r n i n d i ca to rs– Remo ve the diode from its hou sin
g ⇒ page 247. – Unscrew the bolts
⇒fig. 183 from the lamp holder and pull
on this.
– Pull out the lamp holder from the turn signal using a screw driver in the direction of the arrow ( see ⇒ fig. 184
).
– Fit the replacement lamp by pressing it down and rotating to the left.
– Installation is done in the reverse order.
Reverse light / rear fog light– Rotate the lamp holder to the left, and remove it in the direction of the arrow ⇒ fig. 185 .
– R

eplace the bulb by pressing on it and rotating at the same time
to the left.
Fig. 183 Indicator lightsFig. 184 Indicator lights.
AC
Fig. 185 Lamp on interior
side of bumper
altea_ingles Seite 248 Dienstag, 4. Oktober 2005 6:57 18