reset Seat Altea Freetrack 2010 User Guide
[x] Cancel search | Manufacturer: SEAT, Model Year: 2010, Model line: Altea Freetrack, Model: Seat Altea Freetrack 2010Pages: 294, PDF Size: 7.71 MB
Page 92 of 294

Steering wheel controls
90Steering wheel Audio + Telephone controls
Next preset 
a)
Next track 
a)
No function specified
Operates on instrument panel
Previous preset 
a)
Previous track 
a)
No function specified
Operates on instrument panel
Change menu on instrument panel
Change menu on instrument panel
Change menu on instrument 
panel
No function specified
Change menu on instrument panel
Change menu on instrument panel
Change menu on instrument panel
No function specified
Operates on instrument panel
Operates on instrument panel
Operates on instrument panel
Operates on instrument panel
Operates on instrument panel
Operates on instrument panel
Operates on instrument panel
Operates on instrument panel
a)Only if the panel is in Audio menu.AGAHAIAJAKAL
Fig. 56  Controls on the 
steering wheel
Fig. 57  Steering wheel 
controls (depending on 
version of model)
Freetrack_EN.book  Seite 90  Donnerstag, 10. September 2009  10:33 10 
Page 93 of 294

Steering wheel controls91
Safety First
Controls and equipment
Practical tips
Technical Data
Button
Radio
CD/MP3/USB*/iPod*
AUX
NAVIGATOR
TELEPHONE
Vol um e  up
Vol um e  up
Vol um e  up
Volume up
Volu m e up
Volume down
Volume down
Volume down
Vol um e  d own
Volu m e  d own
Search for next station
Next track
Hold down: Fast forward
No function specified
No function specified
No function specified
Search for last station
Last track
Hold down:Rewind
No function specified
No function specified
No function specified
Access telephone menu on  instrument panel
Access telephone menu on instrument panel
Access telephone menu on instrument panel
No function specified
Make call
Accept incoming call End call
Hold down: reject incoming  call
Enable voice recognition
Enable voice recognition
Enable voice recognition
Enable voice recogni-tion
Enable voice recognition
Next preset 
a)
Next track 
a)
No function specified
Operates on instru-ment panel
Movement on telephone  menu
Address book / Last calls / 
Calls received / Missed calls
Previous preset 
a)
Previous track 
a)
No function specified
Operates on instru- ment panel
Movement on telephone  menu
Address book / Last calls / 
Calls received / Missed calls
Change menu on instrument  panel
Change menu on instrument panel
Change menu on instru-ment panel
No function specified
Change menu on instru-ment panel
AAABACADAEAFAGAHAI
Freetrack_EN.book  Seite 91  Donnerstag, 10. September 2009  10:33 10 
Page 233 of 294

Wheels and tyres231
Safety First
Controls and equipment
Practical tips
Technical Data
2.  The tyre pressures should only be checked when the tyres are 
cold. The slightly raised pressures of warm tyres must not be 
reduced.
3.  Adjust the tyre pressure to the load you are carrying.Tyre  pressure
The correct tyre pressure is especially important at high speeds. The pressure 
should therefore be checked at least once a month and before starting a 
journey.
The sticker with the tyre pressure values can be found on the inside of the 
tank flap. The tyre pressure values given are for cold tyres. The slightly raised 
pressures of warm tyres must not be reduced  ⇒.
WARNING
•Check the tyre pressure at least once per month. Checking tyre pressure 
value is very important. If the tyre pressure is too high or too low, there is 
an increased danger of accidents - particularly at high speeds.•A tyre can easily burst if the pressure is too low, causing an accident!•At continuously high speeds, a tyre with insufficient pressure flexes 
more. In this way it becomes too hot, and this can cause tread separation 
and tyre blow-out. Always observe the recommended tyre pressures.•If the tyre pressure is too low or too high, the tyres will wear prema-
turely and the vehicle will not handle well. Risk of accident!For the sake of the environment
Under-inflated tyres will increase fuel consumption.
Tyre pressure monitoring
The tyre pressure monitoring system constantly checks the 
pressure of the tyres.The system uses the speed sensors of the ABS wheels. It operates by 
analysing the speed and frequency spectrum of each wheel.
For optimum performance, use genuine SEAT tyres. In addition, check and 
adjust tyre pressures regularly.
Whenever the tyre pressures are changed or one or more tyres are changed, 
the system should be Reset by pressing the SET switch on the central console.
The system warns the driver in the event of a loss of pressure by means of 
symbols and messages in the instrument cluster display. The system uses 
ESP  ⇒page 185.
Note that tyre pressure also depends on tyre temperature. Tyre pressure 
increases about 0.1 bar for each 10°C in tyre temperature increase. The tyre 
heats up while the vehicle is being driven and the tyre pressure will rise 
accordingly. For this reason, you should only adjust the tyre pressures when 
they are cold (i.e. approximately at ambient temperature).
To ensure that the tyre pressure monitoring system works reliably, you should 
check and, if necessary, adjust the tyre pressures at regular intervals and 
store the correct pressures (reference values) in the system.
A  tyre  pr essure  i nfor ma ti on lab e l is  a tta che d  to t he  insi de  o f the  fu el ta nk  f lap.
WARNING
•Never adjust tyre pressure when the tyres are hot. This may damage or 
even burst the tyres. Risk of accident!•An insufficiently inflated tyre flexes a lot more at high speeds and 
causes significant heating of the tyre. Under these conditions, the tyre 
bead may be released or the tyre may burst. Risk of accident!
Freetrack_EN.book  Seite 231  Donnerstag, 10. September 2009  10:33 10 
Page 252 of 294

If and when
250The electric windows are protected by circuit breakers . These reset automat-
ically after a few seconds when the overload (caused for example by frozen 
windows) has been corrected.
Fuses colour code
WARNING
Never “repair” damaged fuses and never replace them with fuses with a 
higher rating. Failure to comply could result in fire. This could also cause 
damage to other parts of the electrical system.
Note
•If a newly replaced fuse blows again after a short time, the electrical 
system must be checked by a qualified workshop as soon as possible.
•If you replace a fuse with higher-rating fuse, you could cause damage to 
another location in the electrical system.•Always keep some spare fuses in the vehicle. These are available from 
SEAT dealers.•Apart from the fuses indicated in the following tables, there are others 
which must be replaced by a Technical Service.
Colour
Amperes
light brown
5
Red
10
Blue
15
Ye ll ow
20
Natural (white)
25
Green
30
orange
40
Red
50
white
80
Blue
100
grey
150
violet
200
Freetrack_EN.book  Seite 250  Donnerstag, 10. September 2009  10:33 10 
Page 255 of 294

If and when253
Safety First
Controls and equipment
Practical tips
Technical Data
Bulb changeGeneral notesBefore changing any bulb, first turn off the failed component.
Do not touch the bulb glass. Fingerprints vaporise in the heat, causing a 
reduction in the bulb life and condensation on the mirror surface, thus 
reducing efficiency.
A bulb should only be replaced by one of the sam e type. The type is inscribed 
on the bulb, either on the glass part or on the base.
It is highly recommended to keep a box of spare bulbs in the vehicle. At the 
very least, the following spare bulbs, which are essential for road safety, 
should be kept in the vehicle.
Main headlights
Dipped beam - H7
Main beam - H1
Position - W5W
Indicator - PY21W
Xenon headlights
22)/self-directing
Dipped and full beam - D1S
23)
Daylight - P21W SLL
Position W5W
Indicators PY21W
15
Engine management
5
Pump relay
10
16
Right lighting
30
17
Horn
15
18
Vaca n t
19
Clean
30
20
Water pump
10
Pressure sensor pump for 1.8 engine
20
21a)
Lambda probe
15
22
Brake pedal, speed sensor
5
23a)
Engine management
5
Engine management
10
Engine management
15
24
AKF, gearbox valve
10
25a)
ABS pump
40
26
Left lighting
30
27a)
Engine management
40
Engine management
50
28
Vaca n t
29a)
Electric windows (front and back)
50
Electric windows (front)
30
30
Ignition key
50
a)Ampere rating according to motorisationNumber
Consumer
Amperes
22)On this type of headlight, the bulb changes must be made by the SEAT dealer, given
that complex elements must be removed from the vehicle and a reset must be made
on the automatic control system incorporated.23)The Xenon bulbs discharge 2.5 times the light flux and have an average lifespan of 5
times more than that of halogen bulbs, this means that, except due to unusual circum-
stances, there is no need to change the bulbs for the whole life of the vehicle.
Freetrack_EN.book  Seite 253  Donnerstag, 10. September 2009  10:33 10