warning Seat Ateca 2019 User Guide

Safety
WARNING

Instruments and warning/control lamps
Analogue instrument panel Fig. 123
Instrument panel, on dash panel. Details of the instruments

Instruments and warning/control lamps
can choose between the different display op-
tions of the inf ormation that appears in the
Digit al SEAT Cockpit.
Cl
assic View
The revolutions per minute and speedometer
needles appear along the entire length

Instruments and warning/control lamps
Odometer
The od omet
er
registers the total distance
travelled by the car.
The partial odometer (trip ) shows the dis-
tance travelled since the last time it was reset
to zero.
Vehicles with analogue instrument panel:

Instruments and warning/control lamps
steering wheel to switch between the 3 mem-
ories 1)
:
The memory is del et
ed if the
journey is int
errupted for more than 2
hours.
Display and storage of
the journey data and the consumption
values collected. When refuelling, the
memory is deleted.
This memory contains travel data
up to a maximum of 19 hours and 59 mi-
nutes or 99 hours and 59 minutes, or up
to a maximum of 1999.9 km or
9999.9 km. When one of these values is
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is deleted.
Delete journey data presets

Instruments and warning/control lamps
symbol and complementary message on the
instrument panel displ ay

Instruments and warning/control lamps
 > SETTINGS ! Driver Assistance
function buttons.
Displ ay of tr
affic signs
When the traffic sign detection system is con-
nected, a camera located on the base of the
interior rear-view mirror records the traffic
signs in front of the vehicle. After checking
and evaluating the information from the cam-
era, the navigation system and the current
vehicle data, up to three valid traffic signs are
displayed

Instruments and warning/control lamps

Instruments and warning/control lamps
Cool zone. The engine has not r eached
oper ating t
emperature yet. Avoid high en-
gine speeds and stressing the engine if it
has not reached operating temperature.
Normal zone. At high outside tempera-
tures and when making the engine work
hard, the diodes may continue lighting up
and reach the upper zone. This is no
cause for concern, provided the control
lamp does not light up 
Warning area. When the engine is work-
ing hard, especially at high outside tem-
peratures, the diodes may light up in the
warning area.
The coolant temperature gauge only works
when the ignition is switched on.
Control and warning lamp 
It lights up red

Operation
The figure displayed are the kilometres that
can still be tr av
ell
ed or the time until the next
service.
Service due
When the time for a service or an inspec-
tion comes, an audible warning will be emit-
ted when the ignition is switched on and the
fixed key symbol > may appear on the in-
strument panel for a few seconds, along with
one of the following messages: