light Seat Ateca 2019 Owner's Guide

Driver assistance systems
Driver assistance systems
St ar
t
-Stop system*
Control lamps 
It lights up
The Start-Stop system is available, the automatic en-
gine shutdown is activ
e.i
It lights up
The Start-Stop system is not available. Instructions for the driver on the instru-
ment panel displ
ay
Start-Stop system deactivated.
Start the engine manually
This driv er message is displ

ayed when cer-
tain conditions are not met during the stop-
ping phase and the Start-Stop system can-
not restart the engine. The engine must be
started manually.
Start-Stop system: Fault! Function
not available
There is a fault in the Start-Stop system. Take
the vehicle to a workshop to have the fault re-
paired. Description and operation The Start-Stop system helps save fuel and
reduce CO
2 emissions.
In St art

-Stop mode, the engine will automati-
cally switch off when the vehicle stops or is
stopping; for example when stopping at traf-
fic lights. The ignition remains switched on
during the stopping phase. The engine auto-
matically switches back on when required. In
this situation, the light of the START ENGINE STOP button stays on
1)
.
As soon as the ignition is swit ched on, the
St

art-Stop function is automatically activa-
ted.
Further information about the Start-Stop sys-
tem can be found on the Easy Connect sys-
tem: by pressing the button  in the Vehi-
cle status menu.
V ehicl
es with a manual gearbo

x

Driver assistance systems
After detecting that the vehicle is stationary
and the br ak
e pedal has been r
eleased, the
Auto Hold function holds the vehicle. The driv-
er can lift their foot off the brake pedal.
When the driver touches the accelerator
pedal or accelerates slightly to continue driv-
ing, the Auto Hold function releases the brake.
The vehicle moves according to the slope of
the road.
If the vehicle is stationary and one of the con-
ditions required by the Auto Hold function is
impaired, it disconnects itself and the button

Driving
Lane Assist system* Intr oduction Fig. 266
On the windscreen: field of vision of
the L ane Assist syst
em camer
a.Using the camera located in the windscreen,
the L
ane Assist syst
em det

ects the possible
lines dividing the lanes. When the vehicle in-
voluntarily approaches a dividing line it has
detected, the system notifies the driver with a
corrective steering movement. The purpose is
not only to warn the driver, but also to keep
the vehicle inside the lane. This movement
can be over-regulated at any time.
No warning is produced with the turn signals
activated, given that the Lane Assist system
understands that a lane change is required. Control lamp "
It lights up yellow
Lane Assist active but not available.
The system cannot accurat
ely recognise the lane.
Please see page 294, Lane Assist system is not avail-
able (the control lamp is lit up yellow). "
It lights up green
Lane Assist system active and available. Some control and warning lamps will light up
briefly when the ignition is s
wit
ched on t

o
check certain functions. They will switch off
after a few seconds. WARNING
Observe the safety warnings

Driver assistance systems
Using the blind spot detector (BSD)
with parking assist ant (RC
T
A)Activating and deactivating the blind spot
detect
or (BSD) with parking assist

ant
(RCTA)
The blind spot detector with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.

Driving
Key to the Fig. 298:
Pin Meaning
4 Right turn signal5 Rear light, right
6 Brake lights 7 Rear light, left
8 Reverse lights
9 Permanent live
10 Live charge cable 11 Earth for pin 10
12 Unassigned
13 Earth for pin 9 Trailer power socket
The v
ehicl
e is fitt
ed with a 13-pole power
socket for the electrical connection between
the trailer and the vehicle. With the engine
running, electrical devices on the trailer re-
ceive power from the electrical connection
(pin 9 and pin 10 of the trailer power socket).
If the system detects that a trailer has been
connected electrically, the electrical equip-
ment on the trailer will receive voltage
through this connection (pins 9 and 10). Pin 9
has a permanent live. This powers, for exam-
ple, the trailer

Checking and refilling levels
Fuel Identification of the fuel 1)Fig. 300
Identification of fuels according to
Eur opean Union (EU) Dir
ectiv
e 2014/94/Fuels are identified with different symbols.
Depending on the fuel, the diff
er
ent symbol

s
are on the pump and the tank lid of your vehi-
cle. The identification serves to prevent con-
fusion when choosing the fuel.
Petrol with ethanol (“E” stands for Etha-
nol). The number indicates the percent-
age of ethanol in the petrol. “E5” means,
for example, an ethanol ratio of 5% max.
Diesel with biodiesel (“B” stands for Bio-
diesel). The number indicates the per-
1 2 centage of biodiesel in the diesel. “B7”
means, f
or e
x

ample, a proportion of bio-
diesel of max. 7%.
Natural gas: “CNG” means Compressed
Natural Gas.
Type of petrol  Applies to vehicles: with petrol engine
The corr ect gr

ade of petrol is listed inside the
fuel tank flap.
The vehicle is equipped with a catalytic con-
verter and must only be run on unleaded
petrol. The petrol must comply with the
standard EN 228 and be sulphur-free. Fuels
with a 10% ethanol ratio can be refuelled
(E10) 2)
. The types of petrol are differentiated
by using the octane numbers (RON) or via
the anti-knock index (AKI).
The following pieces of text show the infor-
mation included in the corresponding stickers
on the tank lid (examples): 3 Super unleaded petrol 95 octane petrol or
normal 91 oct
ane petr
ol at l

east
We recommend refuelling with super 95 oc-
tane petrol (91 AKI). If not available: normal 91
octane petrol (87 AKI) (with a slight power
loss).
Super unleaded petrol, 95 octanes at
least
You should use super 95 octane petrol (91
AKI) at least.
If super is not available, if necessary, use nor-
mal 91 octane petrol (87 AKI). In this case only
use moderate engine speeds and a light
throttle. Refuel with super as soon as possi-
ble.
Unleaded super plus 98 octane petrol or
super 95 octane petrol at least
We recommend refuelling with super plus 98
octane petrol (93 AKI). If not available: super
95 octane petrol (91 AKI) (with a slight power
loss).
If super is not available, if necessary, use nor-
mal 91 octane petrol (87 AKI). In this case only
use moderate engine speeds and a light

Maintenance
Problem Solution
Care Apply preservative cream regu-
larly to pr
otect from sunlight.
Use a colour preservative if re-
quired a)
Neutral soap solution: two tablespoons maximum in
1 litre of w at

er
Carbon fibre parts Problem Solution
Dirt Clean like plastic partsTake special care with...
Headlights/tail lights

Technical data
Wheels Tyr
e pr
essure, snow chains and
wheel bolts Tyre pressure
The sticker with the t
yr

e pressure values can
be found on the back of the left front door
frame. The tyre pressure values given there
are for cold tyres. The slightly raised pres-
sures of warm tyres must not be reduced.

Technical specifications
Engine data P etr
ol engines
1.0 TSI Start-Stop1.4 EcoTSI Start-Stop
Power output in kW (PS) at 1/min 85 (115)/5,000-5,500110 (150)/5,000-6,000
Maximum torque (Nm at 1/min) 200/2,000-3,500250/1,500-3,500
No. of cylinders/displacement (cm 3
) 3/9994/1,395
Fuel Super 95 / Normal 91 (with a slight power loss) ROZ
Gearbox manualDSGDSG 4Drive
Top speed (km/h) 181 (5)198 (6)189 (5)
Acceleration from 0-80 km/h (seconds) 7.16.05.9
Acceleration from 0-100 km/h (seconds) 10. 78.68.9
Maximum authorised weight (kg) 1,8501,9202,010
Weight in running order (with driver) (kg) 1,3131,3751,476
Maximum authorised weight on front axle (kg) 9409901,010
Maximum authorised weight on rear axle (kg) 9409801,050
Maximum trailer weight without brakes (kg) 650680730
Weight of trailer with brakes on gradients up to 8% (kg) 1,5001,8001,950
Weight of trailer with brakes on gradients up to 12% (kg) 1,3001,6001,900 383

Technical data
Petrol engines
1.5 TSI Start-Stop2.0 TSI Start-Stop
Power output in kW (PS) at 1/min 110 (150)/5,000-6,000140 (190)/4,200-6,000
Maximum torque (Nm at 1/min) 250/1,500-3,500320/1,450-4,200
No. of cylinders/displacement (cm 3
) 4/14984/1,984
Fuel Super 95 / Normal 91 (with a slight power loss) ROZ
Gearbox manualDSGDSG 4Drive DSG 4Drive
Top speed (km/h) 201 (5)198 (6) 194 (5) 210 (5)
Acceleration from 0-80 km/h (seconds) 5.96.0 6.2 4. 7
Acceleration from 0-100 km/h (seconds) 8.58.6 9.2 7.1
Maximum authorised weight (kg) 1,9001,9202,050 2,080
Weight in running order (with driver) (kg) 1,3551,3701,502 1,541
Maximum authorised weight on front axle (kg) a)
a)a)
1,070
Maximum authorised weight on rear axle (kg) a)
a)a)
1,060
Maximum trailer weight without brakes (kg) 670680 750 750
Weight of trailer with brakes on gradients up to 8% (kg) 1,8501,800 1,950 2,000
Weight of trailer with brakes on gradients up to 12% (kg) 1,8001,6001,900 1,900a)
Data not available as this edition goes to print.
384