engine coolant Seat Cordoba 2005 Owner's Manual

39 Instrument panel
Safety FirstControls and equipment Tips and Maintenance Technical Data
The arrangement of the instruments depends on the model and
the engine fitted.
1Revolutions counter* . . . . . . . . . . . . . . . . . . . . . . . . 40
2Coolant temperature . . . . . . . . . . . . . . . . . . . . . . . . . 40
3Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
4Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5Digital clock* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Outside temperature* indicator . . . . . . . . . . . . . . . .42
Multifunction* indicator . . . . . . . . . . . . . . . . . . . . . . 42
6Selector lever position display* . . . . . . . . . . . . . . . .44
7Mileage clock with service interval indicator* . 45-46K
I In
ns
st
tr
ru
um
me
en
nt
ts
s
Instrument overview
1
0 23
4
5
6
rpm x 1000km/h
1/1
1/2
05090130
14:
31PRND432RND432
123
56
0
0.0km
40
20
0 6080
100
140
180
220
10 30 507090200 160 120
4
7B6L-0003Fig. 34

40Instrument panel
Revolutions counter*
C
Ca
au
ut
ti
io
on
n
On no account must the revolutions counter needle move into the red zone
of the scale.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Changing up in good time helps to save fuel and keep the noise down.
Change down a gear at the latest when the engine turn over is no
longer smooth.
Avoid high engine revolutions during the running-in period.
K
Coolant temperature
The gauge starts to work when the ignition is switched on.
When the ignition is switched on the warning lamp
cflashes for a
few seconds as a functional check.
aC Co
ol
ld
d
Avoid high engine speeds and do not work engine too hard yet.
bN
No
or
rm
ma
al
l
When the vehicle is driven normally the needle should settle down in the
central zone.
When engine is working hard and the ambient temperature is high, the
needle may move a long way up.
T Th
hi
is
s iis
s nno
ot
t sse
er
ri
io
ou
us
s aas
s llo
on
ng
g aas
s tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p
cd
do
oe
es
s nno
ot
t ffl
la
as
sh
h.
.
cW
Wa
ar
rn
ni
in
ng
g lla
am
mp
p
If the lamp flashes and a tone is heard at the same time when driving, first
check the coolant temperature being displayed.
If the needle is in the normal zone, top the coolant up at the next
opportunity.
If the reading is in the right hand area, the temperature of the coolant level
is too high. S St
to
op
p,
, ssw
wi
it
tc
ch
h een
ng
gi
in
ne
e oof
ff
f
and try to find cause of trouble
⇒"Cooling system" chapter.
5
6
1/1
1/5090130
PRND432
ab
c
IBN-102Fig. 35
N No
ot
te
e wwa
ar
rn
ni
in
ng
gs
s iin
n ""C
Co
oo
ol
li
in
ng
g ssy
ys
st
te
em
m"
" cch
ha
ap
pt
te
er
r.
.
W
WA
AR
RN
NI
IN
NG
G


48Instrument panel
Alternator
The warning lamp comes on when the ignition is switched on and
must go out when the engine is started.
The alternator is driven by a long-life ribbed belt.
If the warning lamp lights during the journey, s st
to
op
p,
, ssw
wi
it
tc
ch
h oof
ff
f
e en
ng
gi
in
ne
e
and check ribbed belt.
If it isl lo
oo
os
se
e
or broken, d do
o nno
ot
t ddr
ri
iv
ve
e oon
n
– the coolant pump is no
longer being driven. The belt must be checked/ renewed.
If the warning lamp comes on even though the ribbed belt is not
broken or loose, you can generally wait to have this checked at the
next scheduled service.
As the battery will continue to discharge, all electrical consumers
which are not absolutely necessary should be switched off.
K
Parking light/dipped beam
Dipped beam, parking or side light pilot light (green). Works with
the ignition off.
K
Power steering*
The warning lamp will light up for a few seconds as a functional
check when the ignition is switched on.
The warning lamp comes on when the hydraulic oil level is not
sufficient or in case of a failure in the electrical system.
An acoustic signal warns the driver (1 bip).
Contact a Technical Service Centre.
I It
te
em
mS
Sy
ym
mb
bo
ol
lM
Me
ea
an
ni
in
ng
g oof
f wwa
ar
rn
ni
in
ng
g aan
nd
d cco
on
nt
tr
ro
ol
l lla
am
mp
ps
sF
Fu
ur
rt
th
he
er
ri
in
nf
fo
or
rm
ma
at
ti
io
on
n
5Indicators⇒page 49
6Coolant temperature/level*⇒page 49
7Main beam⇒page 50
8Fuel level*⇒page 50
9Anti-lock brake system (ABS)*⇒page 50
10Brakes/Hand brake
11Air Bag system1)⇒page 51
12Seat belt warning lamp*⇒page 51
13Engine diagnosis*⇒page 51
14Traction Control System (TCS)*/⇒page 51
14Electronic stabilisation program (ESP)*⇒page 52
15Electronic immobiliser*⇒page 52
16Engine oil pressure/level⇒page 52
17Trailer indicators*⇒page 53
1)This equipment will vary according to the country.
K

⇒page
50-51

49 Instrument panel
Safety FirstControls and equipment Tips and Maintenance Technical Data
N
No
ot
te
e
When towing the car with the engine shut down or in case of a breakdown
in the servo-steering mechanism, the power steering remains out of order.
Nonetheless, the vehicle continues to be steerable even though the effort to
handle the steering wheel is bigger.
K
Accelerator pedal faults (EPC)*
If there is a fault in the accelerator pedal working, a warning lamp
will go on. Have the fault repaired at a Technical Service Centre.
K
Glowplugs
(Diesel engines only)
When the engine isc co
ol
ld
d
the warning lamp comes on when key is
turned to Drive position (ignition on).
If the warning lamp does not come on, there is a defect in the glow
plug system – call in expert assistance.
When the lamp goes out, start the engine immediately
⇒"Starting
the engine" chapter.
When the engine isw wa
ar
rm
m
the glow plug lamp does not come on –
the engine can be started straight away.
N No
ot
te
e
If a fault occurs in the diesel engine management system, it will indicated
by a flashing warning lamp. In this case, have the engine checked
immediately by a Technical Service Centre.
K
Indicators
The pilot light flashes at the same time as the indicator. If a turn
signal fails, the warning lamp flashes twice as fast. (Not when
towing a trailer).
For more information
⇒"Flashers and high beam lever" chapter.K
Coolant temperature/level*
The warning lamp* lights up for a few seconds as a functional
check when ignition is switched on.
If the lamp does not go out afterwards or lights up or flashes when
driving, either the coolant temperature is too high or the coolant
level too low. An acoustic signal will sound 3 times as an
additional warning:
S St
to
op
p,
, ssw
wi
it
tc
ch
h een
ng
gi
in
ne
e oof
ff
f
and check level. Add coolant if necessary.
• • NNe
ev
ve
er
r oop
pe
en
n tth
he
e bbo
on
nn
ne
et
t oof
f yyo
ou
ur
r cca
ar
r iif
f yyo
ou
u sse
ee
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t cco
om
mi
in
ng
g
f fr
ro
om
m tth
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t –– RRi
is
sk
k oof
f ssc
ca
al
ld
di
in
ng
g!
! WWa
ai
it
t uun
nt
ti
il
l nno
o mmo
or
re
e sst
te
ea
am
m
o or
r cco
oo
ol
la
an
nt
t cca
an
n bbe
e sse
ee
en
n.
.
• • DDo
o nno
ot
t tto
ou
uc
ch
h tth
he
e ffa
an
n.
. TTh
he
e ffa
an
n cca
an
n ssw
wi
it
tc
ch
h oon
n ssu
ud
dd
de
en
nl
ly
y –– eev
ve
en
n wwh
he
en
n tth
he
e
e en
ng
gi
in
ne
e iis
s ssw
wi
it
tc
ch
he
ed
d oof
ff
f.
.
• • PPl
le
ea
as
se
e nno
ot
te
e tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g ppo
oi
in
nt
ts
s tto
o aav
vo
oi
id
d ssc
ca
al
ld
di
in
ng
g wwi
it
th
h hho
ot
t cco
oo
ol
la
an
nt
t:
:
– – EEx
xe
er
rc
ci
is
se
e cca
au
ut
ti
io
on
n wwh
he
en
n oop
pe
en
ni
in
ng
g tth
he
e cco
oo
ol
la
an
nt
t eex
xp
pa
an
ns
si
io
on
n tta
an
nk
k!
! WWh
he
en
n tth
he
e
W
WA
AR
RN
NI
IN
NG
G


101 Climate control
Safety FirstControls and equipment Tips and Maintenance Technical Data
V
Ve
en
nt
ts
s
Depending on the position of air distribution control
C, the air will
flow from one vent or another.
The air temperature will depend on the position of rotary knob
A.
Furthermore, vents
3and 4can be closed or opened individually
and the air flow can be oriented as necessary.
Closed vent: control in vertical position.
Open vent: control in horizontal position.
The air flow can be oriented as you wish by swiveling the vent with
the control.D De
ef
fr
ro
os
st
t wwi
in
nd
ds
sc
cr
re
ee
en
ns
s,
, ffr
ro
on
nt
t aan
nd
d ssi
id
de
e wwi
in
nd
do
ow
ws
s
•Rotary knob
Ato the right to the stop (red point).
•Rotary knob
Bto speed 4.
•Rotary knob
Con
•Vents
3closed.
•Vents
4open and oriented towards the side windows.
Remember that the engine coolant fluid must have optimal
temperature to achieve correct functioning of the heating system
(except in vehicles fitted with additional heating*).
111
555555
1
0 234
5
6
7
8rpm x 1000km/h40
20
0 6080100
140
180
220
26010 30507090
120
160
200240
1/1
1/2
05090130
o
12
3
4 0
4
22
4
33
B6L-0009Fig. 85
Handling instructions


102Climate control
D
De
em
mi
is
st
t wwi
in
nd
ds
sc
cr
re
ee
en
ns
s,
, ffr
ro
on
nt
t aan
nd
d ssi
id
de
e wwi
in
nd
do
ow
ws
s
If windshields fog up when air humidity is high (i.e. if it is raining),
the following is recommended:
•Rotary knob
Ato heating (hot), if necessary.
•Rotary knob
Bto speed 2or 3.
•Rotary knob
Con
•Vents
3closed.
•Vents
4closed and oriented towards side windows.
Once defogged and as a preventative measure you can place
control
Cto the position. This way you will achieve more
comfort and avoid fogging of windshields again.
R Ra
ap
pi
id
d hhe
ea
at
ti
in
ng
g oof
f tth
he
e cca
ab
bi
in
n
•Rotary knob
Ato the right to the stop (red point).
•Rotary knob
Bto speed 3.
•Rotary knob
Con
•Vents
3and 4open.
C Co
om
mf
fo
or
rt
ta
ab
bl
le
e hhe
ea
at
ti
in
ng
g oof
f tth
he
e cca
ab
bi
in
n
Once the windshield is defogged and the desired temperature is
reached, the following should be applied:
•Rotary knob
Bto the desired speed.
•Rotary regulator
Ato the desired heating position.
•Turn rotary regulator
Cto the area between the air distribution at
and
⇒fig. 84.•If the windshield is fogged up, rotary regulator
Con
•Close vents
3.
•With vents
4you can adjust the hot air flow and direction.
V Ve
en
nt
ti
il
la
at
ti
io
on
n ((f
fr
re
es
sh
h aai
ir
r)
)
With the following setting fresh air flows from vents
3and 4
without heating:
•Rotary knob
Bto desired speed.
•Rotary knob
Ato the left stop (blue point).
•Rotary regulator
Cto
•If the windshield fogs up, rotary regulator
Cto
•Open vents
3and 4.
If necessary regulator
Ccan be turned to other positions.K
General notes
•To ensure proper functioning of the heating and ventilation
system, any object must be removed from the air inlet on the grid
below the windscreen.
•Only controls
Aand Ccan be adjusted to any intermediate
position.
•When driving at low speed select a slow ventilation speed and
place control
Cat to avoid fogging up of the windshields.
•Since heating efficiency depends on the coolant fluid
temperature, full heating power occurs when the engine has
reached its operating temperature.


106Climate control
V
Ve
en
nt
ts
s
The air will flow from one vent or another, depending on the
position of distribution control
C.
The air temperature depends on the position of rotary knob
A.
Furthermore, vents
3and 4can be opened or closed individually
and the air flow can be guided according to your needs.
Vents closed: control in vertical position.
Vents open: control in horizontal position.
The air flow can be adjusted by swiveling vent with the control.
D De
ef
fr
ro
os
st
t wwi
in
nd
ds
sh
hi
ie
el
ld
ds
s aan
nd
d ffr
ro
on
nt
t wwi
in
nd
do
ow
ws
s
•Rotary regulator
Ato the right up to the top (red point).•Rotary knob
Bto speed 4.
•Rotary regulatory
Cto
•Close vents
3.
•Vents
4open and facing side windows.
Remember that the temperature of the engine coolant must be
optimal to achieve correct functioning of the heating system
(except for vehicles fitted with additional heating*).
D De
em
mi
is
st
ti
in
ng
g tth
he
e wwi
in
nd
ds
sc
cr
re
ee
en
n aan
nd
d ssi
id
de
e wwi
in
nd
do
ow
ws
s
When the windows steam up due to high air humidity, e.g. when it
is raining, the following settings are recommended.
•Rotary regulator
A, if necessary, clockwise into heating range.
111
555555
1
0 234
5
6
7
8rpm x 1000km/h40
20
0 6080100
140
180
220
26010 30507090
120
160
200240
1/1
1/2
05090130
o
12
3
4 0
4
22
4
33
B6L-0010
Handling instructions
Fig. 87


108Climate control
•Disconnect air recirculation mode and A AC
C(ButtonsDand E).
•Rotary control
Ccan be set as you wish.K
Using air conditioner economically
In cooling mode the air conditioner compressor places demands
on the engine and therefore influences the fuel consumption. To
keep the period it is switched on as short as possible, the
following points should be noted.
•If the inside temperature is very high after the car has been
parked in the sun, it is recommended that doors and windows are
opened briefly to enable the hot air to escape.
•The hot air conditioner should not be switched on during a
journey if the windows or sliding/tilting roof* are open.
•The fresh air option should be selected if the desired inside
temperature can be achieved without having to turn on the cooling
system.
K
General notes
•High humidity and outside temperatures may cause
condensation and the evaporator to drip. This water is channeled
outside which can lead to the formation of puddles beneath your
vehicle. This is normal and does not indicate any leak.•For the ventilation to function correctly ice, snow or leaves in
front of the air inlets, on the grid below the windshields (passenger
side, outside) must be removed.
•Only switches
Aand Ccan by adjusted to any intermediate
position.
•When driving at low speed it is advisable to set a low fan speed
and to set switch
Cto position to avoid fogging of the
windshields.
•Since the efficiency of the heating system depends on the
temperature of the coolant, maximum efficiency is achieved when
the temperature reaches service temperature.
•Stale air is channeled outside through the boot area. For this
reason, do not obstruct the air passage from the passenger cabin
to the rear part by placing clothing on the rear shelf.
• • IIt
t iis
s aad
dv
vi
is
sa
ab
bl
le
e tto
o ssw
wi
it
tc
ch
h oon
n tth
he
e aai
ir
r cco
on
nd
di
it
ti
io
on
ni
in
ng
g aat
t lle
ea
as
st
t oon
nc
ce
e aa
m mo
on
nt
th
h tto
o llu
ub
br
ri
ic
ca
at
te
e tth
he
e jjo
oi
in
nt
ts
s oof
f tth
he
e ssy
ys
st
te
em
m aan
nd
d ppr
re
ev
ve
en
nt
t lle
ea
ak
ks
s iin
n
t th
he
e aai
ir
r cco
on
nd
di
it
ti
io
on
ni
in
ng
g ssy
ys
st
te
em
m.
. IIf
f yyo
ou
u nno
ot
ti
ic
ce
e ddi
im
mi
in
ni
is
sh
he
ed
d cco
oo
ol
li
in
ng
g
p po
ow
we
er
r,
, ggo
o tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e tto
o hha
av
ve
e tth
he
e ssy
ys
st
te
em
m
c ch
he
ec
ck
ke
ed
d.
.
F Fo
or
r cco
or
rr
re
ec
ct
t ffu
un
nc
ct
ti
io
on
ni
in
ng
g oof
f tth
he
e ssy
ys
st
te
em
m ddo
o nno
ot
t cco
ov
ve
er
r tth
he
e ggr
ri
id
d llo
oc
ca
at
te
ed
d
n ne
ex
xt
t tto
o tth
he
e
Eb
bu
ut
tt
to
on
n.
.
•The pollen*/odor filter should be changed regularly in
accordance with the Inspection and Maintenance Plan to avoid a
decreased performance of the system.
K

109 Climate control
Safety FirstControls and equipment Tips and Maintenance Technical Data
Operating faults
•Should the air conditioner not work at any time, it may be due to
one of the following:
– Outside temperature below +5°C
– Blown fuse.
Check the fuse and replace it, if necessary. If the problem is not
due to a defective fuse, switch the air conditioning system offand
have it checked at a Technical Service Centre.
Cooling system compressor may appear to be temporarily
disconnected due to temperature excess of engine coolant.
•If cooling output drops off, switch the air conditioner off and have
the system checked by a SEAT official service point.
K
C Cl
li
im
ma
at
tr
ro
on
ni
ic
c*
*
Observations
Climatronic is a combined heating and air conditioning system
which allows for an exact temperature regulation inside the
vehicle. At the same time, it also allows for decreased humidity,
thus contributing to increased comfort and safety.
Temperature regulation is completely automatic. The system keeps
the selected temperature. If necessary, this automatic regulation
can be adjusted manually.
K
• • FFo
or
r rro
oa
ad
d ssa
af
fe
et
ty
y iit
t iis
s iim
mp
po
or
rt
ta
an
nt
t tth
ha
at
t aal
ll
l wwi
in
nd
do
ow
ws
s aar
re
e ffr
re
ee
e oof
f iic
ce
e,
, ssn
no
ow
w aan
nd
d
m mi
is
st
t.
. OOn
nl
ly
y tth
he
en
n cca
an
n ccl
le
ea
ar
r vvi
is
si
io
on
n bbe
e ggu
ua
ar
ra
an
nt
te
ee
ed
d.
.
Y Yo
ou
u ssh
ho
ou
ul
ld
d tth
he
er
re
ef
fo
or
re
e ffa
am
mi
il
li
ia
ar
ri
is
se
e yyo
ou
ur
rs
se
el
lf
f wwi
it
th
h tth
he
e cco
or
rr
re
ec
ct
t oop
pe
er
ra
at
ti
io
on
n oof
f tth
he
e
h he
ea
at
ti
in
ng
g aan
nd
d vve
en
nt
ti
il
la
at
ti
io
on
n ssy
ys
st
te
em
m aas
s wwe
el
ll
l aas
s rre
em
mo
ov
vi
in
ng
g dda
am
mp
pn
ne
es
ss
s aan
nd
d ffr
ro
os
st
t
f fr
ro
om
m tth
he
e wwi
in
nd
do
ow
ws
s.
.
• •T
Th
he
e hhi
ig
gh
he
es
st
t ppo
os
ss
si
ib
bl
le
e lle
ev
ve
el
l oof
f hhe
ea
at
ti
in
ng
g aan
nd
d qqu
ui
ic
ck
k dde
ef
fr
ro
os
st
ti
in
ng
g oof
ft
th
he
e
w wi
in
nd
do
ow
ws
s cca
an
n oon
nl
ly
y bbe
e aac
ch
hi
ie
ev
ve
ed
d wwh
he
en
n tth
he
e een
ng
gi
in
ne
e hha
as
s aac
ch
hi
ie
ev
ve
ed
d iit
ts
s oop
pe
er
ra
at
ti
in
ng
g
t te
em
mp
pe
er
ra
at
tu
ur
re
e.
.
W
WA
AR
RN
NI
IN
NG
G

121 Driving
Safety FirstControls and equipment Tips and Maintenance Technical Data
Diesel engines
G
Gl
lo
ow
w ppl
lu
ug
g ssy
ys
st
te
em
m
After switching to the driving position (ignition on), the required
glow plug warm-up time is indicated by a lamp which is controlled
by the coolant temperature
⇒"Warning lamps" chapter.
S St
ta
ar
rt
ti
in
ng
g aa cco
ol
ld
d een
ng
gi
in
ne
e
Ambient temperature above +5 °C:
The engine can be started without preglow. Do not depress throttle
during the starting procedure.
Ambient temperature below +5 °C:
•Turn the key in the ignition lock to position 2 2the glow plug
warning lamp comes on. It goes out when the ignition
temperature is reached.
W Wh
hi
il
le
e tth
he
e ggl
lo
ow
w ppl
lu
ug
gs
s aar
re
e wwo
or
rk
ki
in
ng
g ddo
o nno
ot
t ssw
wi
it
tc
ch
h oon
n aan
ny
y hhe
ea
av
vy
y
c cu
ur
rr
re
en
nt
t cco
on
ns
su
um
me
er
rs
s bbe
ec
ca
au
us
se
e tth
hi
is
s wwo
ou
ul
ld
d ppl
la
ac
ce
e aan
n uun
nn
ne
ec
ce
es
ss
sa
ar
ry
y llo
oa
ad
d
o on
n tth
he
e bba
at
tt
te
er
ry
y.
.
If despite this the engine does not start, the fuse may have blown
⇒"Fuses" chapter".
•When the warning lamp goes out, start the engine immediately.
Do not depress the accelerator while starting.
If the engine only fires irregularly, continue to operate the starter a
few seconds longer (30 seconds at maximum) until the engine
runs under its own power.
If the engine does not start, switch the glow plugs on again and try
starting it again as described.S St
ta
ar
rt
ti
in
ng
g aa wwa
ar
rm
m een
ng
gi
in
ne
e
The glow plug lamp does not come on – the engine can be started
straight away.
K
Starting after running out of fuel
If the tank on vehicles with a diesel engine was empty, starting
after filling with diesel fuel can take longer than normal – up to
one minute. This is because the fuel system must first be freed of
air before starting.
K
S St
to
op
pp
pi
in
ng
g tth
he
e een
ng
gi
in
ne
e
Valid for all engines
C
Ca
au
ut
ti
io
on
n
When the engine has been subjected to a heavy engine load for a long ti-
me, the engine must not be switched off abruptly. Let it idle for about
2 minutes to avoid overheating.
A Af
ft
te
er
r tth
he
e een
ng
gi
in
ne
e hha
as
s bbe
ee
en
n sst
to
op
pp
pe
ed
d tth
he
e ffa
an
n cca
an
n cco
on
nt
ti
in
nu
ue
e rru
un
nn
ni
in
ng
g ffo
or
r aa wwh
hi
il
le
e
( (u
up
p tto
o aab
bo
ou
ut
t 110
0 mmi
in
nu
ut
te
es
s)
) wwi
it
th
h tth
he
e iig
gn
ni
it
ti
io
on
n ssw
wi
it
tc
ch
he
ed
d oof
ff
f.
. IIt
t cca
an
n aal
ls
so
o sst
ta
ar
rt
t tto
o
r ru
un
n aag
ga
ai
in
n ssu
ud
dd
de
en
nl
ly
y aaf
ft
te
er
r aa ssh
ho
or
rt
t tti
im
me
e iif
f
W
WA
AR
RN
NI
IN
NG
G