check engine Seat Cordoba 2006 Maintenance programme

Inspection Service general programme11
•
Brake fluid change (every 2 years).
Inspection Service every 15,000 km or 1 yearOperations to be completed on your vehicle•
Label “Next Service”: Note the date, mileage and atta ch it to the door
frame.
•
Engine oil and oil filter: Replacement.
•
Front and rear brake pads: Inspection
•
Service interval indicator on the instrument panel: Re set.
•
Tyres, including the spare wheel: Check the profile, tread wear indicator
and pressure.
•
Interior and glove compartment lighti ng, lighter/socket, warning lights
and horn: Check operation.
•
Front/rear boot lights, indicators and hazard lights: Check operation.
•
Windscreen and headlights washer system: Check oper ation and for
possible damage, top up.
•
Exhaust gases installation: Verify attachments and ch eck for leaks and
damage.
Inspection Service every 30,000 km or each 2 yearsOperations to be completed on your vehicle:•
Exhaust gases installation: Verify attachments and ch eck for leaks and
damage.
•
Steering ball joints: Verify attachme nts and check for leaks and damage.
Check for play.
•
Label “Next Service”: Note the date, mileage and atta ch it to the door
frame.
•
Automatic gearbox (differe ntial): Check the oil level, top-up if necessary.
•
Battery: Inspection
•
Brake system: Check for leaks and damage.
•
Front and rear brake pads: Inspection.
•
Brake fluid level, according to brake pad wear: Inspecti on.
•
Self-diagnosis: Check fault memory in all systems.
•
Front/rear boot lights, indicators and hazard lights: Che ck operation.
•
Poly-V belt: Check condition.
•
Poly-V belt: Check tension (only engines without automatic tension
device).
•
Cooling system: Check the coolant level and the anti- freeze protection.
•
Engine and engine compartment components: Check f or leaks and
damage (from above).
•
Engine and engine compartment comp onents, gearbox and steering ball
joints: Check for leaks and damage (from bellow).
•
Engine oil and oil filter: Replacement.
dsfsd Seite 11 Mittwoch, 3. Mai 2006 5:05 17

Inspection Service general programme
12•
Test drive: Check brake operation, handbrake, gearbo x operation,
steering system operation, kick-down (for autom atic gearbox), air condi-
tioning and sliding roof.
•
Interior and glove compartment lighti ng, lighter/socket, warning lights
and horn: Check operation.
•
Tyres, including the spare wheel: Check the profile, tread wear indicator
and pressure.
•
Headlights: Check adjustment.
•
Windscreen and headlights washer system: Check operation and for
possible damage, top up.
•
Sun roof: Check operation, clean drains and grease guides.
•
Service interval indicator on the instrument panel: Re set.
•
Door and tailgate hinges: Lubricate.
•
Undercarriage protection: Visual damage inspection
•
Steering servo: Check oil level.
Additional workIn addition to the Inspection Service, additional maint enance jobs may have
to be carried out, depending on the conditions in which y our vehicle is used
and depending on the equipment level of your vehicle. Th is additional work
should be carried out in accordance with time/dista nce travelled to ensure
your vehicle remains reliable. Your Serv ice Centre will provide detailed infor-
mation about the additional work that may be neces sary. These can be done
independently of the obligatory services, taking int o account the notes in the
Maintenance Programme (or the label: Next service). Your SEAT Service
Centre will be happy to advise you and quote the p rices for this additional work. Additional jobs completed are marked on the w
orkshop sheet with the
receipt.
Every 7,500 km•
Engine oil and oil filter: Replacement (engines using high sulphur content
diesel).
Every 30,000 km•
Air filter: Clean the housing and replace the filter element (Ibiz a Cupra
only).
•
Fuel filter: Clean.
•
Fuel filter: Replacement (only diesel engines using biodi esel, or using fuel
that does not comply to the DIN EN 590 standard)
•
Dust and pollen filter for the passenger compartment : Replacement.
•
Manual gearbox: Check the oil level (for cases of perme ability).
Every 60,000 km•
Automatic gearbox (Gearbox): Check the ATF level.
•
Fuel filter: Replacement (only diesel engines using fuel conforming to the
DIN EN 590 standard)
•
Air filter: Clean the housing and replace the filter element.
dsfsd Seite 12 Mittwoch, 3. Mai 2006 5:05 17

Inspection Service general programme13
•
Spark plugs: Replacement.
Every 90,000 km / 55,800 Miles (the first
time around) then, every 30,000 km / 18,600 miles•
Camshaft timing belt: Check condition and replace if necessary (petrol
engines only).
Every 120,000 km•
particulate filter: Veri fy (1.9 TDI engines)
•
Camshaft timing belt: Replacement (T DI engines with injector pump).
Every 150,000 km•
particulate filter: Verify (1.4 TDI engines)
•
Camshaft timing belt: Replacement (TDI and SDI engin es).
Every 180,000 km•
Camshaft timing belt: Replacement (4 cylinder petrol en gines 20
valves).
Every 240,000 km•
Tension roller for the camshaft timing belt: Replacement (TDI engines with
injector pump).
Every 2 years•
Brake fluid: Replace
•
Dust and pollen filter for the passenger compartment: R eplace (only for
vehicles with less than 30,000 km).
Every 4 years•
Air filter: Clean the housing and replace the filter element (only f or vehi-
cles with less than 60,000 km).
•
Puncture repair kit: Check the expiry date on the sealing c ompound and
replace if necessary.
•
Spark plugs: Replace (only for vehicles with less than 60, 000 km).
dsfsd Seite 13 Mittwoch, 3. Mai 2006 5:05 17