oil filter Seat Cordoba 2007 Maintenance programme

SEAT maintenance programme
8SEAT maintenance programmeGeneral informationThis maintenance programme will inform you of the w ork that should be
carried out regularly on your vehicle in order to ensure th e safety, reliability
and durability required.
Using the “vehicle id entification” data or the data in this document, wi ll
ensure the correct spare parts for your vehicle are specified in c ase of repairs,
for many years after the initial purchase.
We recommend that you keep this maintenance programme with the vehicle
documents. The record of inspections carried out is one of the essential
requirements for exercising your rights under wa rranty.
The maintenance programme shows the date of delive ry, and this indicates
the starting date of the vehicle warranty.Maintenance ProgrammeThe SEAT maintenance programme consists of the dif ferent inspection serv-
ices which are carried out according to the time sin ce the vehicle purchase or
the mileage.
Each Inspection Service, as well as any additional oper ation required already
has a pre-established work time. This will allow you to know the total cost of
the service beforehand.
The SEAT Service Centre network is equipped with modern workshop tech-
nology and well-trained specialists. Many SEAT Serv ice Centres offer different
service packages at special prices.
Adverse conditionsThe Service Centre “service advisor” will inform you o f any necessary addi-
tional work within the intervals defined by the Inspection S ervice, according
to the conditions and environment in which the vehicle i s used. For example,
an oil change where the vehicle is used only for frequent short journeys or is
subject to extreme temperatures. Likewi se, when the vehicle is used in dusty
conditions the air, dust and pollen filter cartridges must be changed more
often and the timing belt checked.Diesel fuelThe Service Centre “service advisor” can provide information about which
countries use fuel with a high sulphur content. In th ese cases, the oil must be
changed every 7,500 km (5,000 miles).
Caution
•
Vehicles with the label “UNSUITABLE FOR BIODIESEL” on th e fuel cover
cannot be driven using biodiesel.
•
To be certain if your vehicle can be used with biodiesel according to the
DIN EN 14214 (FAME) standard consult your Serv ice Centre.
•
DIN is a German abbreviation for “Deutsches I nstitut für Normung e.V.”,
the German standards institute.
•
EN means European Norm.
•
FAME is the English abbreviation “F atty Acid Methyl Ester”
PM ibi cor_ingles Seite 8 Mittwoch, 21. März 2007 5 :22 17

General programme for Inspection Services11
Example of maintenance according to time
However, there are different specific “additional jo bs” depending on the
distance covered or the time passed since delivery . For ex ample:•
Timing belt change (depending on the mileage).
•
Change of brake fluid (for the first time after 3 years or 200,000 km
(125,000 miles), then every two years).
Inspection Service every 15,000 km or 1 yearOperations to be carried out on your vehicle•
“Next service” label: Write the date and mileage, and att ach it to the door
frame.
•
Engine oil and oil filter: Replace.
•
Front and rear brake pads: Check
•
Service interval indicator on the instrument panel: Re set.
•
Tyres, including the spare wheel: Check surface, tread and tyre pressure.
•
Interior and glove compartment lighting , cigarette lighter, warning lights
and horn: Check operation.
•
Front/rear lights, luggage compartmen t lighting, indicators and hazard
lights: Check operation
•
Windscreen wiper and headlight wiper system: Check operation and look
for possible damage, fill if necessary.
•
Exhaust installation: Check attachments and check fo r leaks and
damage.
Inspection Service every 30,000 km (20,000 miles) or every 2 yearsOperations to be performed on your vehicle:•
Exhaust installation: Check attachments and check fo r leaks and damage.
•
Steering system ball joints: Check attachments and c heck for leaks and
damage. Check for play.
•
“Next service” label: Write the date and mileage, and att ach it to the door
frame.
•
Automatic gearbox (differe ntial): Check the oil level, top up if necessary.
•
Battery: Test
•
Brake system: Check for leaks and damage.
•
Front and rear brake pads: check
•
Brake fluid level, according to brake pad wear: Check.
•
Self-diagnosis: Check fault memory in all systems.
•
Front/rear lights, luggage compartmen t lighting, indicators and hazard
lights: Check operation.
Time 1 year 2 years 3 years
4 years 5 years 6 years
Inspection Service every 15,000 km or 1 year x
xx
Inspection Service every 30,000 km or 2 years x
xx
PM ibi cor_ingles Seite 11 Mittwoch, 21. März 2007 5:22 17

General programme for Inspection Services
12•
Poly-V belt: Check condition.
•
Poly-V belt: Check tension (only engines without autom atic tension
device).
•
Cooling system: Check the levels of the coolant and anti -freeze.
•
Engine and engine compartment components: Check for leaks and
damage (from above).
•
Engine and components in engine compartment, gea rbox and steering
knuckles: Check for leaks and damage (from above).
•
Engine oil and oil filter: Replace.
•
Test drive: Check brake operation, handbrake, gearbo x operation,
steering system operation, kick-down (for autom atic gearbox), air condi-
tioning and sliding roof.
•
Interior and glove compartment lighting , cigarette lighter, warning lights
and horn: Check operation.
•
Tyres, including the spare wheel: Check surface, tread and tyre pr essure.
•
Headlights: Check adjustment.
•
Windscreen wiper and headlight wiper system: Check
operation and look
for possible damage, fill if necessary.
•
Sliding roof: Check operation, clean guttering and lubricate guides.
•
Service interval indicator on the instrument panel: Re set.
•
Door and tailgate hinges: Lubricate.
•
Underbody protection: Check for damage
•
Power steering: Check oil level.
Additional workIn addition to the Inspection Service, additional maintenance jobs may have
to be carried out, depending on the conditions in wh ich your vehicle is used
and on the equipment carried. This addi tional work should be carried out in
accordance with time/distance travelled to ensure your vehicle remains reli-
able. Your Service Centre will provide detailed in formation about the addi-
tional work that may be necessary. This can be done independently of the
obligatory services, taking into account the notes i n the Maintenance
Programme (or the label: Next service). Your SEAT Service Centre will be
happy to advise you and quote the prices for this additi onal work. Additional
jobs completed are marked on the workshop sheet with the receipt.Every 7,500 km (5,000 miles)•
Engine oil and oil filter: Replace (only engines using high sulphur content
diesel fuel).
Every 30,000 km (20,000 miles)•
Air filter: Clean the housing and replace the filter element (Ibiz a Cupra
only).
•
Fuel filter: Drain.
•
Fuel filter: Replacement (only diesel engines using biodi esel, or using fuel
that does not comply with the DIN EN 590 standard)
•
Dust and pollen filter for the passenger compartment : Replace.
•
Manual gearbox: Check the oil level (only in the case of permeability).
PM ibi cor_ingles Seite 12 Mittwoch, 21. März 2007 5:22 17