stop start Seat Exeo 2012 Workshop Manual

Seat Exeo 2012 Workshop Manual Exeo 2012 Seat Seat https://www.carmanualsonline.info/img/39/30818/w960_30818-0.png Seat Exeo 2012 Workshop Manual

Page 271 of 317

Seat Exeo 2012 Workshop Manual 269
If and when
Changing the dipped beam headlight bulb
The procedure for changing the bulb is the same on both
sides.
Fig. 196  Dipped beam
headlights
Fig. 197  Dipped beam
headlights
– Switch off

Page 287 of 317

Seat Exeo 2012 Workshop Manual 285
If and when
– To remove the light cover, unscrew the bolts  ⇒ Fig. 225.
– Remove the bulb, moving it in the direction of the arrow and
outwards  ⇒ Fig. 226.
– Installation is done in

Page 288 of 317

Seat Exeo 2012 Workshop Manual 286If and when
Jump leads
Jump leads must comply with standard  DIN 72553 (see manufacturer's doc-
umentation). The wire cross section must be at least 25  mm 2
 for petrol en-
gines and at least

Page 289 of 317

Seat Exeo 2012 Workshop Manual 287
If and when
– Connect one end of the  red jump lead to the positive  +
 termi-
nal of the vehicle with the flat battery  A ⇒ Fig. 230.
– Connect the other end of the  red jump lead to the

Page 291 of 317

Seat Exeo 2012 Workshop Manual 289
If and when
Towing and tow-starting
Tow-starting
The use of jump leads is preferable to tow-starting.
We recommend that you do  not tow-start your vehicle. Jump-start-
ing is preferable  ⇒ pag

Page 310 of 317

Seat Exeo 2012 Workshop Manual EmergenciesChanging a wheel  . . . . . . . . . . . . . . . . . . . 253
Disconnecting the battery  . . . . . . . . . . . . . 238
Jack  . . . . . . . . . . . . . . . . . . . . . . . . . . . 251, 256
Sun

Page 313 of 317

Seat Exeo 2012 Workshop Manual SSAFE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Safe driving  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Aspects to take into account  . . . . . . . . .
Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60