engine Seat Exeo ST 2010 Maintenance programme

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that
at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no rig ht at all
may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omis-
sion, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.09.10
Vehicle data
1.
2.
3.
4.
5.
1. Vehicle identification number
2. Identification numbers
Type/Model/Engine
Gearbox/Finishes
3. Identification letters
Engine/Gearbox/Paintwork
Equipment
4. Identification codes of variable equipment
5. Consumption (l/100 km) / CO
2Emissions (g/km) urban
Consumption (l/100 km) / CO
2Emissions (g/km) motorway
Consumption (l/100 km) / CO
2Emissions (g/km) mixed
N ote
• We recommend that you visit an Authorised SEAT Service Centre when-
ever you require any work done on your vehicle.
• SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized person-
nel who can guarantee the safety and performance of your vehicle.
• Scrupulously following the General Programme for Inspection
Services in Authorised SEAT Service Centres will ensure you maintain
greater value for your vehicle.
Portada PM_interior.qxd:Interior Manual TOLEDO 26/7/10 15:57 Página 3

Service information
6•If LongLife engine oil is not used, th e service dependent on time/distance
travelled then applies. In this case, an oil c hange service will have to be
carried out every 15,000 km (10,000 miles) or every year.Importance of the Maintenance ProgrammeThe Maintenance Programme confirms the date of deliv ery of
your vehicle and thus the beginning of its warranty cover.The vehicle data that appears in the Maintenance Programme guarantees
that the appropriate Genuine SEAT
® Parts are installed. This data helps
ensure that your car can be repaired without difficulty even after many years
of use.
The Maintenance Programme also informs you of which service should be
carried out when, and the work this entails.
Your Official SEAT Service will note down in this booklet the services carried
out.
Your Maintenance Programme should be kept in the vehicle with the on-
board documentation so that it is at han d whenever you need it.
Please remember to give the Maintenanc e Programme to the new owner if
you sell your car.
The SEAT Service Centre network is equ ipped with modern workshop tech-
nology and well-trained specialists. Many S EAT Service Centres offer different
service packages at special prices
Safety notesAll fluids and consumables , such as timing belts, tyres, coolant liquid, en gine
oil, spark plugs and vehicle batteries are cont inuously being developed.
Therefore, we recommend you take the veh icle to a qualified workshop to
have fluids or consumables changed. The Official SE AT Services receive
regular up-to-date information about mo difications. This is why SEAT recom-
mends you have fluids and other consumables replaced by an Official SEAT
Service.
Unless the vehicle is regularly and correctly s erviced as required in the
service plan, the vehicle could breakdown wh ile driving, leading to serious
accident and injury.•S e r v i c e s s h o u l d b e c a r r i e d o u t b y a q u a l i f i e d w o r k s h o p i n a c c o r d a n ce w i t h
the Maintenance Programme.•Please observe the instructions for use.Note
•Only use suitable fluids. Fluids should nev er be mixed up. This could
result in serious faults and engine dama ge.•SEAT is not responsible for damage to the v ehicle as a result of the use of
poor quality fuel, inadequate servicing o r non-availability of original spare
parts.•Spilt brake fluid may pollute the environme nt. If fluids leak or are spilt,
they should be collected and disposed of a ccordingly.•Regular servicing of your vehicle not only helps to ensure it remains in
good working order but also contributes to road safety. Therefore, we recom-
mend work is carried out in accordance with the Maintenance Programme.
Prog Manto Exeos_EN.book Seite 6 Dienstag, 31. August 2010 4:49 16

SEAT maintenance programme7
SEAT maintenance programmeGeneral informationTo ensure that you have each service carrie d out on time and that none are
forgotten, there is a reminder sticker on the dr iver side door pillar and a
reminder will also be shown via the serv ice interval display on the instrument
panel.
The service intervals quoted are for vehicles used under normal operating
conditions .
However, if the vehicle is used in adverse conditions, it may require work
before the next established service interval or ev en between service inter-
vals.
Adverse conditions include:•the use of fuel with a high sulphur content•frequent short journeys•leaving the engine idling for long periods o f time (as occurs with taxis)•driving on dusty roads or in dusty areas•frequently using the vehicle for towing•mainly driving in the city, in heavy traffic whe re it is necessary to continu-
ously brake and start, and•using the vehicle mainly in the winter
This particularly affects:•the air filter•the timing belt•the engine oil and•the diesel particulate filter In some countries diesel fuel has a high sulp
hur content; in these cases the
oil and the fuel filter should be changed every 7,5 00 km (5,000 miles). Your
Official SEAT Service will be able to tell y ou which countries have diesel with
a high sulphur content.
The service advisor at your Official SEA T Service will advise you on the need
to carry out additional work on your vehicle, t aking into account the usage
conditions of the vehicle.
A list of the work to be carried out at th e SEAT services is given on the
following pages. These services are valid at the time of printing and can be
subject to further modifications for technical reaso ns. Your Official SEAT
Service always has the latest available information and will be able to tell
you if your vehicle requires any other additio nal inspections established by
law.
The cost of the SEAT service may vary, depen ding on the vehicle type, equip-
ment fitted, additional work and statutory inspec tions. Your Official SEAT
Service will tell you how much the SEAT se rvice will cost (labour and parts).
LongLife ServiceWhat is the LongLife service interval?
The service intervals are flexible
Oil change
Inspection
according to a flexible
service interval indicator
Prog Manto Exeos_EN.book Seite 7 Die nstag, 31. August 2010 4:49 16

SEAT maintenance programme
8Whereas conventional service intervals are calculated according to the
number of kilometres travelled, the LongLife Service employs a technology
which considers your personal driving style and the conditions of use appli-
cable to your vehicle. For example, frequent sh ort journeys involve different
conditions of use to long journeys. The m aintenance intervals are flexible.
Remember that, in spite of the above, the LongLife Service should be carried
out at most every 24 months, as engine oi l ages irrespective of the vehicle
conditions of use.
Details of the service work and additional work required can be found on
page ⇒page 9 onwards.
Please observe inspection intervals and e nsure your vehicle is serviced as
required. Please note that failure to ob serve the inspection intervals may
lead to damage to your vehicle.Is my vehicle eligible for the LongLife Service?All the vehicles which are designed for Long Life Service leave the factory with
the correct engine oil. Depending upon the cou ntry where the vehicle is to be
used, the LongLife Service or the inspec tion service is selected. On delivery
of the vehicle, the corresponding service is ma rked on the delivery inspection
sheet.
Renewal of the LongLife Service
On completion of the relevant Service, the authorised SEAT Service Centre
resets the next service and marks the corr esponding box on the service
sheet.
Service interval dependent on time/distance
travelledWhat is a Service Interval dependent on time/distance travelled?
With the Inspection Service the service intervals are fixed.Unlike the LongLife Service, the inspection service is a conventional service
with fixed maintenance intervals.
A reminder label for the scheduled inspecti on services is located on the
inside of the driver door frame; you will als o be reminded by the service
interval counter on the instrument panel, a nd the service records in this docu-
ment.
The services dependent on time/distance trav elled are applied whenever the
conditions for the use of the LongLife S ervice are not met, or where this
service is not desired.
Oil change
as indicated by the service interval display every 12 months
or every 15,000 km (10,000 miles)
a)
a)In Diesel vehicles, if a poor quality fu el is used which fails to comply with the r egula-
tions for Diesel fuel given in the In struction Manual (e.g. due to a high su lphur con-
tent), the oil should be changed ev ery 7,500 km (5,000 miles).
Inspection
according to service interval display
Inspection Service every 30,000 km (20,000 mi les) or 2 years
Inspection Service every 60,000 km (40,000 miles) or 4 years
Prog Manto Exeos_EN.book Seite 8 Dienstag, 31. August 2010 4:49 16

SEAT maintenance programme9
Please observe inspection intervals and en sure your vehicle is serviced as
required. Please note that failure to obse rve the inspection intervals may
lead to damage to your vehicle.
Note
•We recommend that you visit an Authorised SEAT Service Centre whenever
you require any work done on your vehicle.•SEAT keeps its Technical Services up-to-da te on new product develop-
ments. They have tools and highly specia lised personnel who can guarantee
the safety and performance of your vehicle.•Scrupulously following the General Programme for Inspection Services in
Authorised SEAT Services will ensure you m aintain greater value for your
vehicle.Oil change serviceOperations to be performed on your vehicl e:•Engine oil and oil filter: Replace.•Front and rear brake pads: Check.•Service interval indicator: Reset to zero.•“Next service” sticker: Write the date and mile age, and attach it onto the
door frame.
Inspection Service every 30,000 km (20,000 miles) or 2 yearsOperations to be performed on your vehicle:•Battery: Check condition•Self-diagnosis: Check fault memory in all systems.•Service interval indicator: Reset to zero.•Sunroof: Check operation, clean guttering a nd lubricate guides.•Windscreen wiper and headlight wiper system : Check operation and look
for possible damage, fill if necessary.•Tyres (including the spare wheel): Check sur face, tread and tyre pressure.•Engine oil and oil filter: Replace.•Front and rear brake pads: Check.•Brake system: Check for leaks and damage•Engine and engine compartment componen ts (from below) : Check for
leaks and damage•Steering ball joints: Check fastenings and a bsence of leaks and damage,
and verify play.•Engine and engine well components (from abov e): Visual check for leaks
and damage.•Brake fluid level, according to brake pad w ear: Check.•Servo steering hydraulic system: Check for leaks and check fluid levels,
topping up with hydraulic oil where necess ary.•Test run, brake system, parking brake, gear c ontrol, steering system, air
conditioning: Check operation.•“Next service” sticker: Write the date and mile age, and attach it onto the
door frame.
Prog Manto Exeos_EN.book Seite 9 Die nstag, 31. August 2010 4:49 16

SEAT maintenance programme
10Inspection Service every 60,000 km (40,000 miles) or 4 yearsOperations to be performed on your vehicle:•Battery: Check condition•Front/rear lights, luggage compartment lighti ng, indicators and hazard
lights: Check operation.•Interior and glove compartment lighting, lig hter, warning lights and horn:
Check operation.•Self-diagnosis: Check fault memory in all syste ms.•Service interval indicator: Reset to zero.•Door and tailgate hinges: Lubricate.•Door arresters, lock cylinders and bonnet arrester hooks: Lubricate•Sunroof: Check operation, clean guttering and lubricate guides.•Windscreen wiper and headlight wiper system: Check operation and look
for possible damage, fill if necessary.•Tyres (including the spare wheel): Check sur face, tread and tyre pressure.•Engine oil and oil filter: Replace.•Front and rear brake pads: Check.•Exhaust system : Check fastenings and abse nce of leaks and damage•Underside protection: Check visually for damage•Brake system: Check for leaks and damage•Engine and engine compartment component s (from below) : Visual check
for leaks and damage.•Steering knuckles: Check attachment s and check for leaks and damage.
Check for play.
•Engine and engine well components (from abov e): Visual check for leaks
and damage.•Coolant system : Check coolant and frost pr otection level.•Brake fluid level, according to brake pad wear : Check.•Servo steering hydraulic system: Check for leaks and check fluid levels,
topping up with hydraulic oil where nece ssary.•Headlights: Checking their adjustment.•Test run, brake system, parking brake, gear control, steering system, air
conditioning: Check operation.•“Next service” sticker: Write the date and mil eage, and attach it onto the
door frame.Additional tasksIn addition to the Inspection Service, addit ional maintenance jobs may have
to be carried out, depending on the conditions i n which your vehicle is used
and on the equipment carried. This addi tional work should be carried out in
accordance with time/distance travelled to en sure your vehicle remains reli-
able. Your Technical Service will provide detailed information about the addi-
tional work that may be necessary. This can be done independently of the
obligatory services, taking into account the notes on the Maintenance
Programme (or the label: Next service). Your SEAT Service Centre will be
happy to advise you and quote the prices for this add itional work. Additional
jobs completed are marked on the work shop sheet with the receipt.
Prog Manto Exeos_EN.book Seite 10 Di enstag, 31. August 2010 4:49 16

SEAT maintenance programme11
Every 7,500 km (5,000 miles)•Engine oil and oil filter: Replace (only engines using high sulphur content
diesel fuel).Every 30,000 km (20,000 miles) or every 2 years•Dust and pollen filter: Replace.Every 60,000 km (40,000 miles)•Automatic gearbox: Change oil.•Fuel filter: Change (only diesel engines)Every 60,000 km (40,000 miles) or every 4 years•Air filter: Clean casing and replace filter ele ment (only diesel CR engines).•Spark plugs : Replace (except 2.0 TFSI engine s).Every 90,000 km (60,000 miles) or every 6 years•Spark plugs : Replace (only 2.0 TFSI engines).•Air filter: Clean casing and replace filter element (only petrol engines).
At 90,000 km (60,000 miles) the first time, then every 30,000 km (20,000 miles)•Timing belt: Check condition and replace as necessary (only 1.6 MPI
petrol engines up to 180,000 km (120,000 mi les)Every 180,000 km (120,000 miles)•Timing belt: Replace (petrol engines).•Particulate filter: Check (TDI Common Rail engines).Every 210,000 km (130,000 miles)•Timing belt for camshaft: Replace (TDI Commo n Rail engines).•Camshaft timing belt tension roller: Replace (TDI Common Rail engines).After 3 years the first time, then every 2 years•Brake fluid: Replace.Every 4 years•Anti-puncture kit: Check the expiry date on the sealing compound and
replace if necessary.
Prog Manto Exeos_EN.book Seite 11 Di enstag, 31. August 2010 4:49 16

Other services available13
Other services availableLegal Inspection ServiceThe legal inspections must be carried out at the interva ls
prescribed.Many countries have legal requirements ob liging owners to have their vehicle
tested at specified intervals for safety for the user and for other traffic, as well
as ensuring that vehicle exhaust emissions meet the countries' regulations.
These revisions must be overseen by officially certified centres.
Your Technical Service can advise of the ins pections required by law, and can
check your vehicle in the course of an In spection Service. This will save you
both time and money.
The Technical Service can also carry out the inspections required by law at the
client's request.
Even if you do not wish to take advanta ge of this service and decide to take
your car to an officially certified centre for t his check, we recommend that you
speak to the manager of your Technica l Service first.
This person will be able to inform you of any p oints that require attention so
that your car does not fail the test and ha ve to be re-tested.Approved spare partsAll parts of your vehicle have been approved by SEAT, especially those parts
on which your safety depends. For this reason, the parts used in the
Programmed Inspection Services or in a ny vehicle repair must correspond
exactly to the manufacturer-defined requiremen ts. The approved SEAT spare parts have been designed especially for y
our vehicle. For this reason, we
recommend that Genuine approved SEAT spar es are always used.
In the Authorised SEAT Service Centres you will find the most important
approved spare parts. If in an exceptional case, th e necessary parts are not in
stock, they can, in general, be obtained s wiftly.
The SEAT Service Centres in the EU provide a 24 month warranty
1) for
Approved Spare parts from the date they are fi tted or sold. It is therefore
advisable to retain the original invoice from the Technical Service as proof of
the existing warranty.
More information about this may be obtain ed from your Technical Service.
Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your disposal, offering you
the possibility to replace entire assemb lies, the most common being: the
lightened engine, gearboxes, cylinder head s, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same SEA T approved spare parts warranty.
However, these parts are considerably cheape r as they are factory-recondi-
tioned used parts. Keep the invoice for the a pproved SEAT exchange parts as
proof of the start of the existing warranty.
More information about this may be obtai ned at the Technical Service.1)The warranty is not available for all export markets. For more information, ple ase ask
your Authorised SEAT Technical Service.
Prog Manto Exeos_EN.book Seite 13 Di enstag, 31. August 2010 4:49 16

Warranty15
WarrantyFault-free operation warrantyAccording to the clauses of the warranty applie d to SEAT vehicles in the sales
contract, A fault-free operation warranty of 2 years in ac cordance with legal
requirements
2) 3) is provided from the date of delivery.
We hope that it is understood that natural wear as well as damage caused by
the abuse of vehicle performance throug h inappropriate use or by unaccept-
able modifications are excluded from the warran ty. The warranty is also
invalid when the vehicle is damaged by th e use of parts and accessories that
are not SEAT approved or damage due to ignoring th e maintenance and repair
requirements.
Paintwork and body warrantyTech nical Services provide a warranty on bodywork and
paintwork for vehicles sold in the EU.In addition to the warranty conditions for bra nd new SEAT vehicles (as
d e ta ile d i n t he pu rchase cont ra ct ) , a d e f ine d p e r i od war rant y is a ls o p rovi de d
covering paintwork and bodywork rusting:•The additional warranty on paint faults cove rs the first 3 years following
delivery
•Covered against perforation rusting on the b ody during the first 12 years
following delivery.
I f , h o w e v e r , t h i s t y p e o f d a m a g e s h o u l d o c c u r , i t w i l l b e r e p a i r e d f r e e o f ch a r g e
including parts and labour by any SEAT Tec hnical Service in Europe.
Warranty claims will not be accepted in the following circumstances:•if damage is caused by external influence or carelessness, or•if damage to the body is not repaired promp tly and appropriately in
accordance with the manufacturer's inst ructions using genuine, approved
spare parts and materials, or•if perforation rusting is caused by the use of non-genuine parts and mate-
rials for body repairs and if these repairs were not carried out in accordance
with the manufacturer's instructions.
If the bodywork is repaired or painted, you r Technical Service will certify your
warranty against through-rusting for the repair ed sections.Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your disposal, offering you
the possibility to replace entire assemb lies, the most common being: the
lightened engine, gearboxes, cylinder head s, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same SEA T approved spare parts warranty.
2)The warranty is not available for all export markets. For more information, ple ase ask
your Authorised SEAT Technical Service.3)As well as the legally required warran ty, SEAT offers an extended warranty to t heir cli-
ents in some European countries. The s pecific conditions of this extended warranty
are detailed in the vehicle sales cont ract.
Prog Manto Exeos_EN.book Seite 15 Di enstag, 31. August 2010 4:49 16

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that
at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no rig ht at all
may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omis-
sion, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.09.10
Vehicle data
1.
2.
3.
4.
5.
1. Vehicle identification number
2. Identification numbers
Type/Model/Engine
Gearbox/Finishes
3. Identification letters
Engine/Gearbox/Paintwork
Equipment
4. Identification codes of variable equipment
5. Consumption (l/100 km) / CO
2Emissions (g/km) urban
Consumption (l/100 km) / CO
2Emissions (g/km) motorway
Consumption (l/100 km) / CO
2Emissions (g/km) mixed
N ote
• We recommend that you visit an Authorised SEAT Service Centre when-
ever you require any work done on your vehicle.
• SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized person-
nel who can guarantee the safety and performance of your vehicle.
• Scrupulously following the General Programme for Inspection
Services in Authorised SEAT Service Centres will ensure you maintain
greater value for your vehicle.
Portada PM_interior.qxd:Interior Manual TOLEDO 26/7/10 15:57 Página 3