air conditioning Seat Ibiza 2020 Directive 2014/53/EU Bluetooth

Page 43 of 90 Report No. : 60404487 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
d) Overcurrent protective device limited output N/A
e) IC current limiter complying with G.9 N/A
Q.1.2 Test method and compliance ................................ : (See appended table Q.1) P
Current rating of overcurrent prot ective device (A)
................................ ................................ ............... : N/A
Q.2 Test for external circuits – paired conductor
cable N/A
Maximum output current (A) ................................ . : N/A
Current limiting method ................................ ......... :

R LIMITED SHORT CIRCUIT TEST
N/A
R.1 General
N/A
R.2 Test setup
N/A
Overcurrent protective d evice for test ................... :

R.3 Test method
N/A
Cord/cable used for test ................................ ........ :

R.4 Compliance
N/A
S TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
S.1 Flammability test for fire enclosures and fire barrier materials of equipment
where the steady state power does not exceed 4 000 W N/A
Samples, material ................................ .................. :

Wall thickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

Test flame according to IEC 60695 - 11 - 5 with
conditions as set out N/A
- Material not consumed completely N/A
- Material extinguishes within 30s N/ A
- No burning of layer or wrapping tissue N/A
S.2 Flammability test for fire enclosure and fire barrier integrity
N/A
Samples, material ................................ .................. :

Wall thickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

S.3 Flammability test for the bottom of a fire enclosu re
N/A
S.3.1 Mounting of samples N/A
S.3.2 Test method and compliance N/A

Page 42 of 89 Report No. : 60404488 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
d) Overcurrent protective device limited output N/A
e) IC current limiter complying with G.9 N/A
Q.1.2 Test method and compliance ................................ : (See appended table Q.1) P
Current rating of overcurrent protective device (A)
................................ ................................ ............... : N/A
Q.2 Test for external circuits – paired conductor
cable N/A
Maximum output current (A) ................................ . : N/A
Current limiting method ................................ ......... :

R LIMITED SHORT CIRCUIT TEST
N/A
R.1 General
N/A
R.2 Test setup
N/A
Overcurrent protective device for test ................... :

R.3 Test method
N/A
Cord /cable used for test ................................ ........ :

R.4 Compliance
N/A
S TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
S.1 Flammability test for fire enclosures and fire barrier materials of equipment
where the steady state power does not exceed 4 000 W N/A
Samples, material ................................ .................. :

Wall thickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

Test flame according to IEC 60695 - 11 - 5 with
conditions as set out N/A
- Material not consumed completely N/A
- Material extinguishes within 30s N/A
- No burning of layer or wrapping tissue N/ A
S.2 Flammability test for fire enclosure and fire barrier integrity
N/A
Samples, material ................................ .................. :

Wall thickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

S.3 Flammability test for the bottom of a fire enclosure
N/A
S.3.1 Mounting of samples N/A
S.3.2 T est method and compliance N/A

Page 41 of 88 Report No. : 60404489 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
d) O vercurrent protective device limited output N/A
e) IC current limiter complying with G.9 N/A
Q.1.2 Test method and compliance ................................ : (See appended table Q.1) P
Current rating of overcurrent protective device (A)
................................ ................................ ............... : N/A
Q.2 Test for external circuits – paired conductor
cable N/A
Maximum output current (A) ................................ . : N/A
Current limiting method ................................ ......... :

R LIMITED SHORT CIRCUIT TEST
N/A
R.1 General
N/A
R.2 Test setup
N/A
Overcurrent protective device for test ................... :

R.3 Test method
N/A
Cord/cable use d for test ................................ ........ :

R.4 Compliance
N/A
S TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
S.1 Flammability test for fire enclosures and fire barrier materials of equipment
where the steady state power does not exceed 4 000 W N/A
Samples, material ................................ .................. :

Wall th ickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

Test flame according to IEC 60695 - 11 - 5 with
conditions as set out N/A
- Material not consumed completely N/A
- Material extinguishes within 30s N/A
- No burning of layer or wrapping tissue N/A
S.2 Fla mmability test for fire enclosure and fire barrier integrity
N/A
Samples, material ................................ .................. :

Wall thickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

S.3 Flammability test for the bottom of a fire enclosure
N/A
S.3.1 Mounting of samples N/A
S.3.2 Test method and compliance N/A

Page 41 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
d) O vercurrent protective device limited output N/A
e) IC current limiter complying with G.9 N/A
Q.1.2 Test method and compliance ................................ : (See appended table Q.1) P
Current rating of overcurrent protective device (A)
................................ ................................ ............... : N/A
Q.2 Test for external circuits – paired conductor
cable N/A
Maximum output current (A) ................................ . : N/A
Current limiting method ................................ ......... :

R LIMITED SHORT CIRCUIT TEST
N/A
R.1 General
N/A
R.2 Test setup
N/A
Overcurrent protective device for test ................... :

R.3 Test method
N/A
Cord/cable use d for test ................................ ........ :

R.4 Compliance
N/A
S TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
S.1 Flammability test for fire enclosures and fire barrier materials of equipment
where the steady state power does not exceed 4 000 W N/A
Samples, material ................................ .................. :

Wall th ickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

Test flame according to IEC 60695 - 11 - 5 with
conditions as set out N/A
- Material not consumed completely N/A
- Material extinguishes within 30s N/A
- No burning of layer or wrapping tissue N/A
S.2 Fla mmability test for fire enclosure and fire barrier integrity
N/A
Samples, material ................................ .................. :

Wall thickness (mm) ................................ .............. :


Conditioning (  C) ................................ ................... :

S.3 Flammability test for the bottom of a fire enclosure
N/A
S.3.1 Mounting of samples N/A
S.3.2 Test method and compliance N/A