Seat Ibiza 2020 Directive 2014/53/EU General

Product Name:
Telematics
Product Model Numbers: TLVHW3IU-E, TLVHW3IU-R, TLVHE4IU-E, TLVHE4IU-R
Approval Holder:LG Electronics Inc., LG Electronics, LG Science Park 10, Magokjungang 10-ro, Gangseo-gu, Seoul, Republic
of Korea
Product Manufacturer:LG Electronics Inc. , LG Electronics, LG Science Park 10, Magokjungang 10-ro, Gangseo-gu, Seoul, Republic
of Korea
Standards
GroupName
Article 3.1(a) Health & SafetyEN 60950-1:2006 +A11:2009 + A1:2010 +A12:2011 + A2:2013
EN 62311:2008
Article 3.1(b) Electromagnetic CompatibilityDraft EN 301 489-1 V2.2.1
EN 301 489-19 V2.1.1
Draft EN 301 489-52 V1.1.0
EN 55032 : 2015
EN 55035 : 2017
Article 3.2 Effective Use of SpectrumEN 301 908-1 V11.1.1
EN 301 908-2 V11.1.2
EN 301 908-13 V11.1.2
EN 303 413 V1.1.1
EN 301 511 V12.5.1
Article 3.3 (a) to (i) Various RequirementsRisk Assessment
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 2 of 6DTNC180
Doc - Cert v2.1

Annex 1 to EU-Type Examination
EU-Type examination on the essential requirementsArticle 3
Article 3.1 - a) Health and SafetyAssessed
Article 3.1 - b) Electromagnetic compatibilityAssessed
Article 3.2 - Effective use of radio spectrumNot Assessed
Article 3.3 - a) interworks with Accessories/ChargersAssessed
Article 3.3 - b) interworks with Radio NetworksNot Applicable
Article 3.3 - c) can connect to interfacesAssessed
Article 3.3 - d) does not harm the network, misuse network resourcesAssessed
Article 3.3 - e) privacy protectionsNot Applicable
Article 3.3 - f) fraud protectionsAssessed
Article 3.3 - g) emergency services accessNot Applicable
Article 3.3 - h) assist users with disabilitiesNot Applicable
Article 3.3 - i) integrity of softwareNot Applicable
Description of Apparatus
Company NameLG Electronics Inc.
Certification No.DTNC180
Issue Date / Rev6 Aug 2019 / Rev A
Equipment DescriptionTelematics
Hardware VersionH11
Firmware VersionX034
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 3 of 6DTNC180
Doc - Cert v2.1

Emission Information
TechnologyFrequency
FromToEmission DesignatorRF Power
Max.TypeField StrengthWCDMA Band 11992.41977.622.64dBmConducted--
WCDMA Band 31712.41782.622.89dBmConducted--
WCDMA Band 8882.4912.623.35dBmConducted--
LTE Band 11920198022.15dBmConducted--
LTE Band 31710178521.82dBmConducted--
LTE Band 72500257021.63dBmConducted--
LTE Band 888091521.98dBmConducted--
LTE Band 2083286222.47dBmConducted--
LTE Band 28A70371822.03dBmConducted--
LTE Band 32 (RX
Only)14521496------
GSM 900880.2914.831.99dBmConducted--
DCS 18001710.21784.829.98dBmConducted--
GNSS (RX Only)15591610------
Technical Construction File Details: (Documents Reviewed)
Technical Report(s):
Article 3.1(a) Health & Safety:
50200371 002
Article 3.1(b) Electromagnetic Compatibility:
DREKCEE1907-0485
DRECEE1907-0486
Article 3.2 Effective Use of Spectrum:
N/A
Article 3.3 (a) to (i) Various Requirements:
Risk_Assessment_TLVHW3IU-E.pdf
Supporting Documentation:
Service Agreement
Agent Authorization
EU Application
EU Declaration of Conformity
Block Diagram
BOM or Parts List
External Photographs
Internal Photographs
Label and its Location
Operational Description
PCB Layout
Schematics
Test Setup - EU
User Manual
Notes
-Update: Adding new models with Ethernet Port option.
Scope
This EU-Type Examination Certificate is given in respect of compliance of radio spectrum use Article 3 Paragraph 2 of the RED Directive 2014/53/EU. The
scope of the evaluation and this certificate relates only to those items identified in 'Annex 1 to EU - Type Examination Certificate' for the specific product and
Certificate number referenced above.
EU Type Examination was performed according to Module B: EU-type examination procedure per Annex III the Directive on the essential requirements in
Article 3, for the specific product and Certificate Number referenced above.
This EU Type Examination Certificate is based upon the review of the Technical Documentation and supporting evidence for the adequacy of the technical
design solution, it is only valid in conjunction with the attached Annexes. The scope of this statement relates to a single sample of the apparatus identified
above and of the submitted documents only.
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 4 of 6DTNC180
Doc - Cert v2.1

Annex 2 to EU-Type ExaminationObligations of the Applicant
Ref RED 2014/53/EU Article 10 - Obligations of manufacturers
1. When placing their radio equipment on the market, manufacturers shall ensure that it has been designed and manufactured in
accordance with the essential requirements set out in Article 3.
2. Manufacturers shall ensure that radio equipment shall be so constructed that it can be operated in at least one Member State without
infringing applicable requirements on the use of radio spectrum.
3. Manufacturers shall draw up the technical documentation referred to in Article 21 and carry out the relevant conformity assessment
procedure referred to in Article 17 or have it carried out. Where compliance of radio equipment with the applicable requirements has been
demonstrated by that conformity assessment procedure, manufacturers shall draw up an EU declaration of conformity and affix the CE
marking.
4. Manufacturers shall keep the technical documentation and the EU declaration of conformity for 10 years after the radio equipment has
been placed on the market.
5. Manufacturers shall ensure that procedures are in place for series production to remain in conformity with this Directive. Changes in
radio equipment design or characteristics and changes in the harmonised standards or in other technical specifications by reference to
which conformity of radio equipment is declared shall be adequately taken into account.
When deemed appropriate with regard to the risks presented by radio equipment, manufacturers shall, to protect the health and safety of
end-users, carry out sample testing of radio equipment made available on the market, investigate, and, if necessary, keep a register of
complaints, of non-conforming radio equipment and radio equipment recalls, and shall keep distributors informed of any such monitoring.
6. Manufacturers shall ensure that radio equipment which they have placed on the market bears a type, batch or serial number or other
element allowing its identification, or, where the size or nature of the radio equipment does not allow it, that the required information is
provided on the packaging, or in a document accompanying the radio equipment.
7. Manufacturers shall indicate on the radio equipment their name, registered trade name or registered trade mark and the postal address
at which they can be contacted or, where the size or nature of radio equipment does not allow it, on its packaging, or in a document
accompanying the radio equipment. The address shall indicate a single point at which the manufacturer can be contacted. The contact
details shall be in a language easily understood by end-users and market surveillance authorities.
8. Manufacturers shall ensure that the radio equipment is accompanied by instructions and safety information in a language which can be
easily understood by consumers and other end-users, as determined by the Member State concerned. Instructions shall include the
information required to use radio equipment in accordance with its intended use. Such information shall include, where applicable, a
description of accessories and components, including software, which allow the radio equipment to operate as intended. Such instructions
and safety information, as well as any labelling, shall be clear, understandable and intelligible.
The following information shall also be included in the case of radio equipment intentionally emitting radio waves:
(a) frequency band(s) in which the radio equipment operates;
(b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.
9. Manufacturers shall ensure that each item of radio equipment is accompanied by a copy of the EU declaration of conformity or by a
simplified EU declaration of conformity. Where a simplified EU declaration of conformity is provided, it shall contain the exact internet
address where the full text of the EU declaration of conformity can be obtained.
10. In cases of restrictions on putting into service or of requirements for authorisation of use, information available on the packaging shall
allow the identification of the Member States or the geographical area within a Member State where restrictions on putting into service or
requirements for authorisation of use exist. Such information shall be completed in the instructions accompanying the radio equipment.
The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in
accordance with the advisory procedure referred to in Article 45(2).
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 5 of 6DTNC180
Doc - Cert v2.1

11. Manufacturers who consider or have reason to believe that radio equipment which they have placed on the market is not in conformity
with this Directive shall immediately take the corrective measures necessary to bring that radio equipment into conformity, to withdraw it or
recall it, if appropriate. Furthermore, where the radio equipment presents a risk, manufacturers shall immediately inform the competent
national authorities of the Member States in which they made the radio equipment available on the market to that effect, giving details, in
particular, of the noncompliance, of any corrective measures taken and of the results thereof.
12. Manufacturers shall, further to a reasoned request from a competent national authority, provide it with all the information and
documentation in paper or electronic form necessary to demonstrate the conformity of the radio equipment with this Directive, in a
language which can be easily understood by that authority. They shall cooperate with that authority, at its request, on any action taken to
eliminate the risks posed by radio equipment which they have placed on the market.
Ref RED 2014/53/EU Article 11 - Authorised representatives
1. A manufacturer may, by a written mandate, appoint an authorised representative.
The obligations laid down in Article 10(1) and the obligation to draw up technical documentation laid down in Article 10(3) shall not form
part of the authorised representative's mandate.
2. An authorised representative shall perform the tasks specified in the mandate received from the manufacturer. The mandate shall allow
the authorised representative to do at least the following:
(a) keep the EU declaration of conformity and the technical documentation at the disposal of national market surveillance authorities for 10
years after the radio equipment has been placed on the market;
(b) further to a reasoned request from a competent national authority, provide that authority with all the information and documentation
necessary to demonstrate the conformity of radio equipment;
(c) co-operate with the competent national authorities, at their request, on any action taken to eliminate the risks posed
Article 19 General principles of the CE marking
1.The CE marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.
2.On account of the nature of radio equipment, the height of the CE marking affixed to radio equipment may be lower than 5 mm, provided
that it remains visible and legible.
Article 20 Rules and conditions for affixing the CE marking and the identification number of the notified body
1.The CE marking shall be affixed visibly, legibly and indelibly to the radio equipment or to its data plate, unless that is not possible or not
warranted on account of the nature of radio equipment. The CE marking shall also be affixed visibly and legibly to the packaging.
2.The CE marking shall be affixed before the radio equipment is placed on the market.
3.Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall
take appropriate action in the event of improper use of that marking.
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 6 of 6DTNC180
Doc - Cert v2.1

UK 1





REU-DECLARATION OF CONFORMITY

Manufacturer: Continental Advanced Antenna GmbH
Address: Römerring 1
31137 Hildesheim
Product: Amplifier
Type /
Article number:
AM/FM1/DAB2 RdW AGC 760 035 577 T
DAB AGC 9Y0 035 225 J
FM AGC 9Y0 035 225 C
AM/FM/FZV AGC 9Y0 035 225 A
AM/FM/DAB/FZV AGC 9Y0 035 225 N
DAB RdW 760 035 577 S
FM2 RdW 760 035 577 A
AM/FM1 RdW 760 035 577
FM2 RDW (no AGC) 6F9 035 225
FM2 RDW (no AGC) 6F0 035 225
FM2 RDW (AGC) 57A 035 577 A
AM/FM RDW 57A 035 577

Continental Advanced Antenna GmbH hereby confirm under its sole responsibility that the designated
product, when used as intended, complies with the following directives on the harmonisation of the
laws.
 Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws.

Health and safety pursuant to Art. 3(1) a): Applied standards
EN 62368-1: 2014 (Second Edition)
IEC 62368-1: 2014 (Second Edition)

Electromagnetic compatibility pursuant to Art. 3(1) b): Applied standards
EN 301 489-1 V1.9.2 (2011-09)

UK 2

Efficient use of spectrum pursuant to Art. 3(2): Applied standards
ES 202 056 V1.1.1 (adopted)


Development, production, quality assurance and marketing are based on the standard ISO/TS 16949.

The conformity assessment procedure referred to in Article 17 and detailed in Annex III of Directive
2014/53/EU has been followed with the involvement of the following Notified Body:
CSA Group Bayern GmbH
Ohmstrasse 1-4
94342 Strasskirchen, Germany,
Notified body number: 1948
The notified body has issued the EU type-examination certificate:
ZS 17 06 54004 003

Place, Date: Hildesheim, 31.07.2020
Binding signature:

Michael Heise
Managing Director Dr. Markus Hoffmeister
Managing Director