instrument panel Seat Ibiza 2020 User Guide

Instruments and warning/control lamps
Operation using the multifunction
st eering wheel Fig. 73
Right side of the multifunction steering
wheel : butt
ons to the menus and information
displays on the instrument panel. As long as a priority 1
››

› page 75
warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button  of the multifunction
st eering wheel
›

›› Fig. 73
.
Select a menu or an informative display

Operation
Note
If when switching on the ignition warnings
ar e sho
wn about existing faults, it might not
be possible to change the settings or show
the information as described. In this case,
go to a specialised workshop and request a
repair. Control lamps
Contr ol and w

arning lampsThe control and warning lamps are indicators
of w
arnings
›

›› , faults or certain functions.
Some contr ol and w
arning lamps come on
when the ignition is switched on, and switch
off when the engine starts running, or while
driving.
Depending on the model, additional text
messages may be viewed on the instrument
panel display. These may be purely informa-
tive or they may be advising of the need for
action ››› page 68, Instrument panel
.
Depending upon the equipment fitted in the
vehicle, instead of a warning lamp, some-
times a symbol may be displayed on the in-
strument panel.
When certain control and warning lamps are
lit, an audible warning is also heard. Red warning lamps

Instruments and warning/control lamps
Multifunction steering wheel* Oper ation of the audio
, telephone and navigation system with voice control Fig. 79
Controls on the steering wheel. The steering wheel includes a multifunction
modul
e fr

om where it is possible to control the audio, telephone and radio/navigation
functions without needing to distr
act the driv-
er.
Applies to vehicles with analogue instrument panel Button
Radio MediaTelephone* Navigation*
A Turn
Turn volume up/down.
Turn volume up/down. Turn volume up/down.Turn announcement volume up/down.
A Press
Mute volume.
Mute volume. Mute incoming call.Mute voice navigation
B a)
Activate/deactivate voice control. b)
This function can be used fr om any mode

, except in the case of an active call.
C /
D Search for the previous/next sta-
tion
c)
. Short press: S
wit
ch to the previ-
ous/next track.
Long press: Fast rewind/forward d)
.

Operation
Button
Radio MediaTelephone* Navigation*
E /
F a)
Change menu on instrument panel.
This function can be used fr
om any mode (audio
, media, navigation, vehicle status, travel data).
G Colour instrument panel: swit

ch to the previous menu.
Monochrome instrument panel: switch to the previous function.
H Turn
Coloured instrument panel: List of
st
ations av

ailable (only if the in-
strument panel is in audio menu). Coloured instrument panel: next
tr ack (only if the instrument panel
is in audio menu).

Operation
time of year, thus causing serious injuries,
illness or e
v
en death. CAUTION
Before opening or closing the rear lid, make
sur e that ther

e is enough space to open or
close it, e.g. when pulling a trailer or in a
garage. Note
Before closing the rear lid, make sure that
the k ey has not been l

eft inside the luggage
compartment. Opening and closing the rear lid
Fig. 93
Rear lid: opening from outside. The rear lid opening system operates electri-
cally. It is activ
at

ed by using the insignia sha-
ped handle on the rear lid ››› Fig. 93
. To lock or unlock the rear lid, press the d or
 buttons of the v
ehicle key.
A warning appears on the instrument panel
display if the rear lid is open or not properly
closed.* An audible warning is also given if it
is opened while the vehicle is moving faster
than 6 km/h (4 mph)*.
Opening and closing

Lights
Note
“Tourist light” is only allowed temporarily. If
you ar e pl
anning a long stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights. Interior lights
Lighting of the instrument panel ,
displ

ays and switches Depending on the model, the lighting of the
instrument clust
er and s

witches can be ad-
justed in the infotainment system, using the
button    ! SETT,NGS ! Light !
,nterior lighting
››› page 90
.
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the  function ac- tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the following message will appear
Turn on the
lights on the instrument panel.
Interior and reading lights Fig. 103
Detail of roof lining: front lighting of
the passenger compartment. Knob Function
 Turns off the interior lights.
 Turning the interior lights on or off.
 The interior lights come on automati-
cally when you unl
ock the v

ehicle,
open a door or remove the key from
the ignition.
The light goes out a few seconds after
closing all the doors, when locking the
vehicle or connecting the ignition.
* /
 Turning the reading light on and off The light controls may vary depending on the
v
ehicl

e version.
Luggage compartment lighting
The light is activated when the rear lid is
open, even when the ignition and lights are
turned off. For this reason, ensure that the
rear lid is always closed.
Ambient light*
The ambient light lights up the area of the
centre console and the footwell area and,
depending on the version, the front door pan-
els as well.
It will be switched on at full brightness when
the doors are opened and the lights will be
dimmed during driving, when the light selec-
tor is set to ,  or .
The intensity of the background light can be
adjusted through the infotainment system
menu. The colour can also be changed in
versions with lighting on the front door panel
(button    ! SETT,NGS ! Back-
ground lighting
››› page 86
). Note
If not all the vehicle doors are closed, the
int erior lights will be s

witched off after ap-
prox. 10 minutes, providing the ignition key
has been removed and the courtesy light
position selected. This prevents the battery
from discharging. 121

Introduction
Technical data Radio with integrated hardware (8.25 ")
1)
The f act
ory-mounted radio in the vehicle with
integrated hardware includes country-specif-
ic components and software for connectivity
and for the execution of vehicle, comfort and
infotainment functions.
The corresponding indications are shown on
the radio screen and partly on the instrument
panel.

v Capacitive colour screen:

v 8.25 inch version, TFT, WVGA: 1082 x 480
pixels.

v Touch operation via the device screen, ro-
tary push-button, menu button and buttons
on the multifunction steering wheel.
Central computer with control and display
unit (10") 2)
The factory-mounted central computer in the
vehicle includes country-specific compo-
nents and software for connectivity and for
the execution of vehicle, comfort and infotain-
ment functions. The corresponding indications are shown on
the contr
ol and displ

ay unit screen and partly
on the instrument panel.

v Capacitive colour screen:

v Using the equipment with:

v Touch zones Touch operation.

v Buttons on the multifunction steering
wheel.

v Approach sensors (driver and passenger
side recognition, gesture control).
Vehicle and comfort functions

v Driver assistance system settings.

v Heating and air conditioning settings.

v Lights and visibility function settings.

v Vehicle comfort settings.

v Parking and manoeuvring settings.
Sound system Basic equipment:
The inf
ot

ainment system that is supplied from
the factory is equipped as follows:

v Speakers in different locations and with dif-
ferent power levels (watts).

v Internal amplifier depending on the system:
v
4 speakers: 2 x 20 W

v 6 speak

ers: 5 x 20 W

v Setting options:

v Equaliser, depending on the system:

v 4 speakers: treble, mid and bass.

v 6 speakers: 5 frequency bands or pre-
defined settings.

v Sound distribution, depending on the sys-
tem:

v4 speakers: Balance (left / right)

v 6 speakers: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones (valid for the
6-speaker system):

vManual (Driver and All)

v Automatic depending on the seats oc-
cupied.
Optional sound system
The infotainment system can be extended
with an optional sound system as follows:
v 7 speakers in different locations and with
different power levels (watts).

v 300W external amplifier (Ethernet or CAN,
depending on the infotainment system),
which processes the audio signals sent by
the central computer. »1)
Equipment name: Media System
2) Equipment name: Connect System.
155

Driving
To put the lever in P or t ak
e it out of P , the
locking button must be pressed and held and
the brake pedal pressed simultaneously.
 – Reverse gear
Reverse gear must be engaged only when
the vehicle is stationary and the engine is
idling ››› .
T o mo

ve the lever to position R, the lock but-
ton must be pressed and held while pressing
the brake pedal at the same time. The reverse
lights come on when the lever is in the R posi-
tion with the ignition on.
 – Neutral
With the lever in this position, the gear is in
neutral.
Press the brake pedal to move the lever from
N to D/S when the vehicle is stationary or at
speeds below 3 km/h (2 mph) ››› .
 – P
ermanent f

orward drive position
The lever in the D/S position enables the
gears to be operated in normal mode (D) or
sport mode (S). To select Sport mode S,
move the lever backwards. Pushing the lever
again will select normal mode D. The selec-
ted driving mode is shown on the instrument
panel display.
In normal mode (D), the gearbox selects the
best gear ratio. This depends on the engine load, the road speed and the dynamic gear
control pr

ogramme (DCP).
Sport mode (S) should be selected for a
sporty driving style. This setting makes use of
the engine's maximum power output. When
accelerating the gear shifts will be noticea-
ble.
Under certain circumstances (e.g. on moun-
tain roads) it can be advantageous to switch
tiptronic mode ››› page 201
, to adapt the
gears to suit the road conditions.
Selector lever lock
In P or N, the lever lock prevents a gear range
from being engaged, and prevents the vehi-
cle from moving off accidentally.
To release the gear lever lock, press and hold
the brake pedal with the ignition on. At the
same time, press the lever lock in the direc-
tion of the arrow ››› Fig. 141
.
As a reminder to the driver, when the lever is
in positions P or N the following indication will
be shown on the screen: When stationary, apply footbrake
while selecting a gear.
The lever is not locked if it is moved quickly
through position N (e.g. when shifting from R
to D). This makes it possible, for instance, to
“rock the vehicle backwards and forwards” if
it is stuck in snow or mud. The lever lock en-
gages automatically if the brake pedal is not pressed and the lever is in position N for mor
e
than about one second at a speed of less
than 5 km/h (3 mph).
Safety interlock for ignition key
Once the ignition has been turned off, the key
may be removed only if the gear selector is in
position P. While the key is not in the ignition,
the selector lever is locked in position P. WARNING

Start and driving
SEAT Drive Profiles* Intr oduction The SEAT Drive Profile enables the driver to
choose betw
een the Eco, Normal, Sport and
,ndividual pr
ofiles, which modify the be-
haviour of several vehicle functions, providing
different driving experiences.
The ,ndividual profile can be configured
according to personal preferences. The other
profiles have a fixed configuration.
Description Depending on the equipment fitted in the ve-
hicl
e

, SEAT Drive Profile can operate on the
following functions:
Engine
Depending on the profile selected, the engine
responds more quickly or smoothly to the ac-
celerator being pressed. When the Eco profile
is selected, the Start-stop function is activa-
ted.
In vehicles with automatic transmission, the
gear change timing is changed to put the
changes at higher or lower revolutions. The
Eco profile activates the Inertia function,
thereby reducing consumption. The rest of
the driving profiles will activate the inertia use function when the selector lever is not in the S
position, depending on how the accel

erator
pedal is released ››› page 203
. When the ve-
hicle is turned on again, the function is activa-
ted by default to reduce consumption.
With manual transmission, the Eco profile
changes the gear change recommendations
to facilitate more efficient driving.
“Dual Ride” suspension*
The “Dual Ride” suspension sets the suspen-
sion to comfortable in the Eco and Normal
profiles, and to sport in the Sport profile. In
the ,ndividual profile the suspension can
be switched between Normal or Sport, de-
pending on personal preference.
In the event of a fault in the “Dual Ride” sus-
pension, the following message is displayed
on the instrument panel screen Fault
shock absorber regulation .
Steering
Power steering becomes harder in the Sport profile to enable a sportier driving style.
Air conditioning
In vehicles with Climatronic, this can operate
in the Eco profile, especially restricting fuel
consumption. Adaptive Cruise Control (ACC)*
The ACC’s accel
eration and braking mode
varies according to the driving profile
››› page 222.
Setting the driving profile Fig. 145
Next to the gear lever: MODE button. You can select from Normal
, Sport, Eco and
,ndividual .
Y ou can sel

ect the required profile either by
repeatedly pressing the selection button
››› Fig. 145, or by using the touch screen, in
the menu that opens when the aforemen-
tioned button is pressed.
An icon on the touch screen provides infor-
mation about the active profile.
The illumination of the button

Driving
Introduction Fig. 149
Instrument panel display: GRA status
indications. The cruise control system (CCS) is able to
maint
ain the set speed fr
om 20 km/h (15
mph).
The CSS only reduces vehicle speed by
ceasing to accelerate, not by actively braking
the vehicle ››› .
Depending on the equipment, the cruise con-
tr ol can be oper

ated using the lever of the
turn signals ››› page 215
or by the third lever
››› page 215.
Status display
GRA status ››› Fig. 149 CCS temporarily switched off. The set
speed is displayed in small or dark

ened
figures.
System error. Contact a specialised
workshop.
CCS switched on. The speed memory is
empty.
The CCS is switched on. The set speed is
displayed in large figures.
Changing gear in CCS mode
The CCS decelerates as soon as the clutch
pedal is pressed, intervening again automati-
cally after a gear is engaged.
Travelling down hills with the CCS
If the CCS cannot maintain a constant vehi-
cle speed downhill, brake and change down
a gear if necessary. The GRA is temporarily
disabled by pressing the brake.
Automatic off
The GRA disconnects automatically or is
temporarily interrupted: