Seat Ibiza 2020 Service Manual

Self-help
The following conditions may cause the
emer gency call service t
o function in a limi-
ted manner or the call to be diverted to the
112 emergency number:

Emergencies
Vehicle tool kit Fig. 30
Underneath the floor panel of the lug-
gage compartment: v ehicl
e tool kit.The vehicle tool kit is located under the floor
panel in the luggage compartment. T
o ac-
cess the v

ehicle tools ››› page 132
.
The tool kit includes:
Adapter for the anti-theft bolt*
Towing eye, removable
Wheel spanner*
Crank handle for jack
Jack*
Hook for extracting the central wheel
trims*
Clip for removing the wheel bolt caps
Some of the items listed are only provided in
certain model versions, or are optional extras. 1 2
3
4
5
6
7 WARNING
When the vehicle tool kit, tyre mobility set
and spar e wheel ar

e loose in the interior
they can be violently thrown in case of a
sudden manoeuvre or braking and espe-
cially in accidents, causing serious injury.

Self-help

Emergencies
Warning provided by tyre pressure moni-
t oring syst
em (it can also be integrated in
the inflator tube).
Tube for inflating tyres
12 volt connector
Bottle of sealant
Spare tyre valve
The valve insert remover 1 has a gap at
the l o

wer end for a valve insert. The valve in-
sert can only be screwed or unscrewed in this
way. This also applies to its replacement part 11 .
Sealing and inflating a tyre Sealing the tyre

Self-help
Check after 10 minutes of driving Screw the inflator tube
››
› Fig. 31
5 again
and check the pr essur
e on the gauge 6 .
1.3 bar (19 psi / 130 kP a) and l
ower:

Emergencies
Note
There is also a valve mark on the back of
the centr al wheel trim that indicat
es the
correct alignment. Integral wheel trim
Fig. 33
Remove the wheel cover. The wheel covers must be removed for ac-
cess t
o the wheel nuts.
R

emoving

Self-help
Note
Make a note of the code number of the an-
ti-theft wheel bolt and k eep it in a saf
e
place, but not in your vehicle. If you need a
new adapter, you can obtain it from the
SEAT Official Service, indicating the code
number. Loosening wheel nuts
Fig. 36
Wheel change: loosen the wheel nuts. Fig. 37
Wheel change: tyre valve 1 and the
corr ect position f

or the anti-theft wheel locking
bolt 2 or
3 .
Use only the wheel wrench belonging to the
car t
o l

oosen the wheel nuts.
Loosen the wheel nuts only about one turn
before raising the vehicle with the jack.
If the wheel bolt is very tight, carefully push
on the end of the wheel wrench with your
foot. Hold on to the vehicle for support and
take care not to slip during this operation.
Loosening wheel nuts

Emergencies

Self-help
CAUTION
The vehicle must not be raised on the
cr ossbar
. Only place the jack* on the
points designed for this purpose on the
strut. Otherwise, the vehicle may be dam-
aged. Removing and installing a wheel
Change the wheel after loosening the wheel
nuts and r
aising the v

ehicle with the jack.
When removing/fitting the wheel, the rim may
hit and damage the brake disc. For this rea-
son, please take care and get a second per-
son to assist you.
Taking off the wheel

Emergencies