warning Seat Ibiza 2020 Repair Manual
[x] Cancel search | Manufacturer: SEAT, Model Year: 2020, Model line: Ibiza, Model: Seat Ibiza 2020Pages: 325, PDF Size: 5.51 MB
Page 279 of 325

Wheels
max. 150 km/h (93 mph)
max. 160 km/h (99 mph)
max. 1 70 km/h (
106 mph)
max. 180 km/h (112 mph)
max. 190 km/h (118 mph)
max. 200 km/h (124 mph)
max. 210 km/h (130 mph)
max. 240 km/h (149 mph)
Some manufacturers use the letters “ZR” for
tyres with a maximum authorised speed
above 240 km/h (149 mph). WARNING
Page 281 of 325

Wheels
pressure of 4.2 bar as indicated on the tyre
pr essur
e label ››› Fig. 193
.
Driving style
Fast cornering, heavy acceleration and hard
braking (squealing tyres) all increase tyre
wear.
Wheel balance
The wheels on new vehicles are balanced.
However, certain circumstances may lead to
imbalance (run-out), which is detected as vi-
brations in the steering wheel.
Unbalanced wheels should be rebalanced,
as they otherwise cause excessive wear on
steering, suspension and tyres. A wheel must
also be rebalanced when a new tyre is fitted
or if a tyre is repaired.
Incorrect wheel alignment
Incorrect running gear alignment causes ex-
cessive tyre wear, impairing the safety of the
vehicle. If you notice excessive tyre wear, you
should check wheel alignment at a SEAT Of-
ficial Service. WARNING
Unsuitable handling of the wheels and
t yr
es may lead to sudden tyre pressure los-
ses, to tread separation or even to a blow-
out.
Page 282 of 325

Practical tips
The minimum permitted profile depth 1)
hav e
been r eached when the tyres have worn
down to the wear indicators. Replace the
tyres with new ones ››› .
Changing wheel s ar
ound
To ensure that the wear is equal on all tyres
the wheels should be changed round from
time to time according to the system
››› Fig. 195. The useful life of all the tyres will
then be about the same time. WARNING
The tyres must be replaced at the latest
when the tr ead is w
orn down to the tread
wear indicators. Failure to follow this in-
struction could result in an accident.
Page 283 of 325

Wheels
design of summer tyres (width, rubber com-
pound, tr ead patt
ern) gives less grip on ice
and snow. This applies particularly to vehicles
equipped with wide section tyres or with
high speed tyres (code letters H, V or Y on
the sidewall).
Only use winter tyres of the correct type ap-
proved for your vehicle. The sizes of these
tyres are specified in the vehicle's documents
(e.g. EC Certificate of Conformity or COC 1)
).
The vehicle documentation varies depending
on the country of residence.
Winter tyres lose a great deal of their proper-
ties when the tread is worn down to a depth
of 4 mm.
The performance of winter tyres is also se-
verely impaired by ageing, even if the tread is
still much deeper than 4 mm.
A code letter indicating the speed limit is
stamped on all winter tyres ››› page 276
.
Vehicles capable of exceeding these speeds
must have an appropriate sticker attached
so that it is visible to the driver. Suitable stick-
ers are available from the SEAT Official Serv-
ice and specialised workshop. Please note
the regulations to this effect in your country.
“All-weather” tyres can also be used instead
of winter tyres. Using winter tyres with V-rating
Please not
e that the generally applicable
240 km/h (149 mph) speed for winter tyres
with the letter V is subject to technical re-
strictions; the maximum permissible speed
for your vehicle may be significantly lower.
The maximum speed limit for these tyres de-
pends directly on the maximum axle weights
for your car and on the listed weight rating of
the tyres being used.
It is best to contact a SEAT Official Service to
check the maximum speed which is permissi-
ble for the V-rated tyres fitted on your car on
the basis of this information. WARNING
Exceeding the maximum speed permitted
f or the wint
er tyres fitted on your car can
cause tyre failure, resulting in a loss of con-
trol of the vehicle – risk of accident. For the sake of the environment
When winter is over, change back to sum-
mer t yr
es at an appropriate moment. In
temperatures above +7°C (+45°F), perform-
ance will be improved if summer tyres are
used. Fuel consumption, wear and noises
while driving will all be reduced. Snow chains
Snow chains should only be used on the
fr
ont wheel
s.
Page 284 of 325

Practical tips
Tyres Wheel rim Chains
185/70 R14 5Jx14 ET38
Max. link 13.5
mm
185/65 R15 5.5Jx15 ET40
185/60 R16 6Jx16 ET45
195/55 R16 6Jx16 ET45
185/60 R16 6.5Jx16 ET47
Max. link 9 mm
195/55 R16 6.5Jx16 ET47
215/45 R17 7Jx17 ET51
215/40 R18 7Jx18 ET51
Other dimensions do not allow chains Remove any central wheel trims and the rim
ring bef
or
e fitting snow chains. WARNING
The use of unsuitable or incorrectly fitted
chains coul d l
ead to serious accidents and
damage.
Page 290 of 325

Maintenance
normal service intervals, always considering
the conditions of use of your v ehicl
e.WARNING
If the services are insufficient or not per-
f ormed and if the service int
ervals are not
observed, the vehicle may be immobilised
in traffic and cause accidents and severe
injuries.
Page 291 of 325

Vehicle maintenance
If your SEAT vehicle is immobilised due to a
f ault or an accident, our assist
ance services
will help you keep moving.
Take into account that the SEAT Mobility
Service differs depending on the country in
which the vehicle was purchased. For further
information ask your SEAT dealership or the
SEAT website in your country.
Warranty
Fault
-free operation warranty SEAT Authorised Services ensure the perfect
condition of ne
w v
ehicles. Check the pur-
chase agreement or complementary addi-
tional documentation provided by your Tech-
nical Service to see the conditions and the
terms of the warranty. Consult further infor-
mation in this regard in your SEAT Official
Service. Vehicle maintenance
Maint enance and cl
eaning
Basic observations Regular and careful care helps to maintain
the v
alue of your v
ehicle. In addition, it may
become a prerequisite to demand the war-
ranty in the event of corrosion damage and
deficiencies in the paint coat of the body-
work.
Specialised workshops have the necessary
care products. Please follow the instructions
for application on the packaging. WARNING
Page 292 of 325

Maintenance
Do not use a nozzle that sprays the water out
in a dir ect str
eam or one that has a rotating
jet for forcing off dirt.
The water temperature must not exceed
60°C.
Automatic car washes
Spray the vehicle before starting the car
wash.
Make sure that the windows and the panor-
amic sunroof* are closed and the windscreen
wipers are deactivated. Bear in mind the in-
structions of the car wash tunnel operator,
especially if your vehicle has detachable
parts.
Use of car washes without brushes if possible.
Washing by hand
Clean your vehicle from top to bottom with a
soft sponge or with a brush. Only use clean-
ing products that do not contain solvents.
Washing vehicles with a matte paint by
hand
To prevent damage to the vehicle when
washing it, first remove the thicker dust and
dirt. To remove traces of insects, grease and
fingerprints, it is best to use a special cleaner
for matte paint. Apply the product with a microfibre cloth. To
avoid damaging the surf
ace of the paint, do
not apply too much pressure.
Rinse with plenty of water. Then clean it with
a neutral cleaning product and a soft microfi-
bre cloth.
Rinse the vehicle again with plenty of water
and then leave it to dry. Remove traces of
water with a leather cloth. WARNING
Page 297 of 325

Accessories and modifications to the vehicle
Any r etro-fitted equipment which has a di-
r ect effect on the vehicle and/or the way it is
driven, such as a cruise control system or
electronically-controlled suspension, must
be approved for use in your vehicle and bear
the e mark (the European Union's authorisa-
tion symbol).
If any additional electrical devices are fit-
ted which do not serve to control the vehicle
itself (for instance a refrigerator box, laptop
or ventilator fan, etc.), they must bear the & sign (manufacturer conformity declaration in
the European Union). WARNING
Accessories, for example telephone hold-
ers or cup hol ders, shoul
d never be fitted
on the covers, or within the working range
of the airbags. Otherwise, there is a danger
of injury if the airbag is triggered in an acci-
dent. Technical modifications
Unauthorised modifications to the electronic
components, softw
ar
e, wiring or data transfer
in the vehicle may cause malfunctioning.
You will appreciate that your SEAT dealership
cannot be held liable for any damage
caused by modifications and/or work per-
formed incorrectly. For this reason we recommend asking official
SEAT service centres t
o do any necessary
work using genuine SEAT parts®. WARNING
Incorrectly performed modifications or
other w ork on your v
ehicle can lead to mal-
functions and cause accidents. Radio telephones and office equip-
ment
Radio transmitters (fixed installation)
Any r
etr
ofit installations of radio transmitters
in the vehicle require prior approval. SEAT
generally authorises in-vehicle installations
of approved types of radio transmitters provi-
ded that:
Page 305 of 325

Indications about the technical data
Weights Load on the roof
The maximum authorised r
oof l
oad for your
vehicle is 75 kg.
Empty weight, total weight, axle loads
The empty weight of the vehicle with driver
(75 kg) was calculated according to the (EU)
1230/2012 standard. Optional equipment can
increase the empty weight, which means that
the possible useful load decreases propor-
tionally.
Trailer weight
The maximum permitted drawbar load on the
ball head of the towing bracket is 50 kg. WARNING
The values indicated for the maximum per-
mitt ed w
eights must not be exceeded.
There is a risk of accident and damage! 303