language Seat Leon 2020 Directive 2014/53/EU General

Annex 2 to EU-Type ExaminationObligations of the Applicant
Ref RED 2014/53/EU Article 10 - Obligations of manufacturers
1. When placing their radio equipment on the market, manufacturers shall ensure that it has been designed and manufactured in
accordance with the essential requirements set out in Article 3.
2. Manufacturers shall ensure that radio equipment shall be so constructed that it can be operated in at least one Member State without
infringing applicable requirements on the use of radio spectrum.
3. Manufacturers shall draw up the technical documentation referred to in Article 21 and carry out the relevant conformity assessment
procedure referred to in Article 17 or have it carried out. Where compliance of radio equipment with the applicable requirements has been
demonstrated by that conformity assessment procedure, manufacturers shall draw up an EU declaration of conformity and affix the CE
marking.
4. Manufacturers shall keep the technical documentation and the EU declaration of conformity for 10 years after the radio equipment has
been placed on the market.
5. Manufacturers shall ensure that procedures are in place for series production to remain in conformity with this Directive. Changes in
radio equipment design or characteristics and changes in the harmonised standards or in other technical specifications by reference to
which conformity of radio equipment is declared shall be adequately taken into account.
When deemed appropriate with regard to the risks presented by radio equipment, manufacturers shall, to protect the health and safety of
end-users, carry out sample testing of radio equipment made available on the market, investigate, and, if necessary, keep a register of
complaints, of non-conforming radio equipment and radio equipment recalls, and shall keep distributors informed of any such monitoring.
6. Manufacturers shall ensure that radio equipment which they have placed on the market bears a type, batch or serial number or other
element allowing its identification, or, where the size or nature of the radio equipment does not allow it, that the required information is
provided on the packaging, or in a document accompanying the radio equipment.
7. Manufacturers shall indicate on the radio equipment their name, registered trade name or registered trade mark and the postal address
at which they can be contacted or, where the size or nature of radio equipment does not allow it, on its packaging, or in a document
accompanying the radio equipment. The address shall indicate a single point at which the manufacturer can be contacted. The contact
details shall be in a language easily understood by end-users and market surveillance authorities.
8. Manufacturers shall ensure that the radio equipment is accompanied by instructions and safety information in a language which can be
easily understood by consumers and other end-users, as determined by the Member State concerned. Instructions shall include the
information required to use radio equipment in accordance with its intended use. Such information shall include, where applicable, a
description of accessories and components, including software, which allow the radio equipment to operate as intended. Such instructions
and safety information, as well as any labelling, shall be clear, understandable and intelligible.
The following information shall also be included in the case of radio equipment intentionally emitting radio waves:
(a) frequency band(s) in which the radio equipment operates;
(b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.
9. Manufacturers shall ensure that each item of radio equipment is accompanied by a copy of the EU declaration of conformity or by a
simplified EU declaration of conformity. Where a simplified EU declaration of conformity is provided, it shall contain the exact internet
address where the full text of the EU declaration of conformity can be obtained.
10. In cases of restrictions on putting into service or of requirements for authorisation of use, information available on the packaging shall
allow the identification of the Member States or the geographical area within a Member State where restrictions on putting into service or
requirements for authorisation of use exist. Such information shall be completed in the instructions accompanying the radio equipment.
The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in
accordance with the advisory procedure referred to in Article 45(2).
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 5 of 6DTNC180
Doc - Cert v2.1

11. Manufacturers who consider or have reason to believe that radio equipment which they have placed on the market is not in conformity
with this Directive shall immediately take the corrective measures necessary to bring that radio equipment into conformity, to withdraw it or
recall it, if appropriate. Furthermore, where the radio equipment presents a risk, manufacturers shall immediately inform the competent
national authorities of the Member States in which they made the radio equipment available on the market to that effect, giving details, in
particular, of the noncompliance, of any corrective measures taken and of the results thereof.
12. Manufacturers shall, further to a reasoned request from a competent national authority, provide it with all the information and
documentation in paper or electronic form necessary to demonstrate the conformity of the radio equipment with this Directive, in a
language which can be easily understood by that authority. They shall cooperate with that authority, at its request, on any action taken to
eliminate the risks posed by radio equipment which they have placed on the market.
Ref RED 2014/53/EU Article 11 - Authorised representatives
1. A manufacturer may, by a written mandate, appoint an authorised representative.
The obligations laid down in Article 10(1) and the obligation to draw up technical documentation laid down in Article 10(3) shall not form
part of the authorised representative's mandate.
2. An authorised representative shall perform the tasks specified in the mandate received from the manufacturer. The mandate shall allow
the authorised representative to do at least the following:
(a) keep the EU declaration of conformity and the technical documentation at the disposal of national market surveillance authorities for 10
years after the radio equipment has been placed on the market;
(b) further to a reasoned request from a competent national authority, provide that authority with all the information and documentation
necessary to demonstrate the conformity of radio equipment;
(c) co-operate with the competent national authorities, at their request, on any action taken to eliminate the risks posed
Article 19 General principles of the CE marking
1.The CE marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.
2.On account of the nature of radio equipment, the height of the CE marking affixed to radio equipment may be lower than 5 mm, provided
that it remains visible and legible.
Article 20 Rules and conditions for affixing the CE marking and the identification number of the notified body
1.The CE marking shall be affixed visibly, legibly and indelibly to the radio equipment or to its data plate, unless that is not possible or not
warranted on account of the nature of radio equipment. The CE marking shall also be affixed visibly and legibly to the packaging.
2.The CE marking shall be affixed before the radio equipment is placed on the market.
3.Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall
take appropriate action in the event of improper use of that marking.
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 6 of 6DTNC180
Doc - Cert v2.1