display Seat Leon 2020 User Guide

Operation
of specific traffic signs for vehicles with trailer,
such as speed limits or o v
ertaking prohibi-
tions. Activation or deactivation is carried out
in the infotainment system using the function
button  > Driver assistance > Trailer as- sist ››› page 96
.
For trailer mode, the display of speed limits
applicable to the type of trailer or to the legal
provisions can be adjusted. The speed is ad-
justed in steps of 10 km/h (5 mph) within a
range of between 60 km/h (40 mph) and
130 km/h (80 mph). If it is adjusted to a speed
greater than that which is permitted in the
country in question for driving with a trailer,
the system automatically displays the usual
speed limits, e.g. in Germany 80 km/h
(50 mph).
If the speed warning for the trailer is deacti-
vated, the system displays the speed limits as
if there were no trailer hitched.
No entry sign
The traffic sign recognition system warns
acoustically and visually in the instrument
panel when a no entry sign is crossed on a
one-way road or an entrance to a motorway
or highway.
Limited operation
The traffic sign detection system has certain
limitations. The following cases may lead the system to operate with limitations or not at
all:

Instruments and warning/control lamps
Power meter  V
alid for: hybrid vehicles Fig. 65
Digital instrument panel: Power meter The lower left hand side of the rev counter
has tw
o col
our coded areas:
Charge: Charging zone. Indicates the
amount of charge generated and the
maximum charge.
Power %: Electric traction zone. Indi-
cates the percentage of power used and
the maximum amount of power currently
available.
The power meter shows the usage level of
the electric drive. The power meter bar shows
the current usage level. Green
Blue A finer coloured border indicates how much
the propul

sion can currently be used. De-
pending on the selected driving program and
the current availability of electrical power,
the boundaries of the different colours can
vary.
The following displays can be seen on the
Power meter:
››› Fig. 65
The vehicle recovers electrical energy
Electric drive switched on / Boost (the ve-
hicle runs for a short time at the maximum
power of the electric motor and combus-
tion engine).
The combustion engine must be running.
Battery level indicator  V
alid f
or: hybrid vehicles Fig. 66
Digital instrument panel: battery level
indicat or

. A
B
C The small arrow next to the charging station
symbol indicat
es which side of the v

ehicle the
charging cover is on. Note

Operation
In vehicles with Services est ablished by
time or mil eage, the service intervals are
already pre-defined.
In vehicles with LongLife Service, the inter-
vals are determined individually. Thanks to
technological progress, maintenance work
has been greatly reduced. Because of the
technology used by SEAT, with this service
you only need to change the oil when the ve-
hicle so requires. To calculate this variation
(max. 2 years), the vehicle's conditions of use
and individual driving styles are considered.
The advance warning first appears 20 days
before the date established for the corre-
sponding service. The kilometres (miles) re-
maining until the next service are always
rounded up to the nearest 100 km (miles) and
the time is given in complete days. The cur-
rent service message cannot be viewed until
500 km after the last service. Prior to this, on-
ly lines are visible on the display.
Inspection reminder
If a service or an inspection has to be carried
out soon, a service reminder will be dis-
played when the ignition is switched on.
The figure displayed are the kilometres that
can still be travelled or the time until the next
service. Service due
When the time for a service
or an inspec-
tion comes, an audible warning will be emit-
ted when the ignition is switched on and the
fixed key symbol > may appear on the in-
strument panel for a few seconds, along with
one of the following messages:

Operation
Operation with the wiper lever Fig. 71
Wiper lever: control keys. As long as a priority 1
››
› page 76
warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button ››› Fig. 71
1 .
Sel ect a menu or an inf

ormative display

Instruments and warning/control lamps
Fig. 73
Left side of the multifunction steering
wheel : butt
on for driver assistance systems
(depending on versions). With the turn signal and main beam headlight
l
e

ver button, you can activate or deactivate
the driver assistance systems displayed in the
Assistance systems menu .
Activating or deactivating a driver assis-
tance system using the turn signal lever
and main beam headlight

Instruments and warning/control lamps
>
Service interval display

Instruments and warning/control lamps
Vehicle information Fig. 76
Schematic representation: Vehicle infor-
mation and st at
us Pressing on  V
ehicl

e info in the main menu
opens the Vehicle info menu with the follow-
ing submenus:
Driving data. The average consump-
tion, average speed, distance travelled,
trip duration and autonomy are shown. It
has 3 memories: “From departure”, “To-
tal calculation” and “From refuelling”
››› page 75.
Vehicle status. The warnings regarding
faults, incidents, memorisation of the
tyre pressure or information of the next
inspection service are displayed. –
–

95

Operation
Assist systems and vehicle settings Fig. 77
Schematic representation: Assist systems
and v ehicl
e settings Press 
››

› Fig. 77
A , or V
ehicle settings in
the main menu t
o open the assistants and ve-
hicle settings menu. Next, clicking on any of
the menus located in the left area B , dis-
pl ays the settings menu or the sel

ected assist
systems on the display.
The number of assist systems and settings
depend on the version and the country in
question.
The C points indicate that, by moving your
finger o v

er the screen, from left to right or
vice versa, the rest of the assist services that
the model is fitted with will be shown.

v Driver assistance

vAutomatic parking brake activation
››› page 275.
v
Park assist ›

›› page 282
.

v Activate / deactivate ESC, stabilisation
systems and brake assist ››› page 278
.

v Activate / deactivate the Start-Stop sys-
tem ››› page 223
.

v Adaptive cruise control (ACC)
››› page 253.

v Lane Assist (lane keeping system)
››› page 261.

v Emergency brake assistance system
(Front Assist) ››› page 249
.

v Fatigue detection ››› page 77
.

v Traffic sign recognition ››› page 78
.

v Lane assist ››› page 267
.

v Emergency Assist ››› page 265
.

v SEAT Drive Profile ››› page 236
v
Ambient lighting ››
› page 128

v Interior settings

vInstrument panel ››› page 72
.

v Lighting ››› page 126
.

v Rear view mirrors ››› page 131
.

v Exterior settings

vClosing ››› page 98
.

v Lights ››› page 120
.

v Windows ››› page 116
.

v Tyres ››› page 352
.96

Air conditioning
Climatronic control Fig. 149
Schematic representation: air condition-
ing functions A
Climabar
Fix ed bar at the t
op of the Infotainment Sys-
tem ››› Fig. 149
A display, (even if it is switch-
ed off) wher e the f

ollowing Air Conditioning
functions are located:

Shows fan status/speed. By pressing it, you
can access the Air conditioning menu
››› page 160.
 .
°C
Slide your finger from left to right or vice ver-
sa over the numbers to adjust the desired
temperature. Press on the same numbers to access the
temper

ature adjustment submenu.
Or: use the touch zones 1 and
2 (blue /
r ed) t

o adjust the temperature of the Air Con-
ditioning ››› Fig. 149
.
A e
Access the seat heating* submenu
››› page 163.
 Switching air recirculation on and off
››› page 163 Temperature setting submenu
Submenu where the f

ollowing functions are
found:
. °C
Slide your finger from left to right or vice ver-
sa over the bar, or, press ( or

Operation
Air conditioning percentage
r eached function* Shows how long it will take to reach the set
comf
ort t
emperature as a percentage.
Once reached, 100% will be displayed on the
screen. There is one indicator for the driver's
area and another for the passenger area. Passenger recognition function  V
alid for: hybrid vehicles.
The fr
ont or rear area passenger recognition
function turns down the air conditioning in
these areas if no occupation is detected in
them, with the aim of reducing the vehicle’s
energy consumption.
The turning down of the air conditioning is in-
dicated as follows: