seat Seat Leon 2020 Service Manual

Air conditioning
Climatronic control Fig. 149
Schematic representation: air condition-
ing functions A
Climabar
Fix ed bar at the t
op of the Infotainment Sys-
tem ››› Fig. 149
A display, (even if it is switch-
ed off) wher e the f

ollowing Air Conditioning
functions are located:

Shows fan status/speed. By pressing it, you
can access the Air conditioning menu
››› page 160.
 .
°C
Slide your finger from left to right or vice ver-
sa over the numbers to adjust the desired
temperature. Press on the same numbers to access the
temper

ature adjustment submenu.
Or: use the touch zones 1 and
2 (blue /
r ed) t

o adjust the temperature of the Air Con-
ditioning ››› Fig. 149
.
A e
Access the seat heating* submenu
››› page 163.
 Switching air recirculation on and off
››› page 163 Temperature setting submenu
Submenu where the f

ollowing functions are
found:
. °C
Slide your finger from left to right or vice ver-
sa over the bar, or, press ( or

Operation
automatically turned on to the level set the
l ast time
.
Cases in which the heat seating should
not be switched on
Do not switch the seat heating on if any of the
following conditions are met:

Air conditioning
convenience consumers, e.g. seat or rear
windo w heating may s
witch on automatically
if considered necessary by the Climatronic
(in cold conditions) before the departure time.
Comfort consumers depend on features.

Infotainment system
Copyright
As a gener al rul
e, audio and video files stored
on data media and audio sources are subject
to intellectual property protection in accord-
ance with the national and international pro-
visions applicable in each case. Please bear
in mind all legal provisions!
Technical data Radio with integrated hardware (8.25 ")
1)
The f act

ory-mounted radio in the vehicle with
integrated hardware includes country-specif-
ic components and software for connectivity
and for the execution of vehicle, comfort and
infotainment functions.
The corresponding indications are shown on
the radio screen and partly on the instrument
panel.

v Capacitive colour screen:

v 8.25 inch version, TFT, WVGA: 1082 x 480
pixels.

v Touch operation via the device screen, ro-
tary push-button, menu button and buttons
on the multifunction steering wheel. Central computer with control and display
unit (10")
2)
The f act

ory-mounted central computer in the
vehicle includes country-specific compo-
nents and software for connectivity and for
the execution of vehicle, comfort and infotain-
ment functions.
The corresponding indications are shown on
the control and display unit screen and partly
on the instrument panel.

v Capacitive colour screen:

v Using the equipment with:

v Touch zones Touch operation.

v Buttons on the multifunction steering
wheel.

v Proximity sensors and gesture control.
Vehicle and comfort functions

v Driver assistance system settings.

v Heating and air conditioning settings.

v Lights and visibility function settings.

v Vehicle comfort settings.

v Parking and manoeuvring settings. Sound system Basic equipment:
The inf
ot

ainment system that is supplied from
the factory is equipped as follows:

v Speakers in different locations and with dif-
ferent power levels (watts).

v Internal amplifier depending on the system:

v 4 speakers: 2 x 20 W

v 7 speakers: 5 x 20 W

v Setting options:

v Equaliser, depending on the system:

v 4 speakers: treble, mid and bass.

v 7 speakers: 5 frequency bands or pre-
defined settings.

v Sound distribution, depending on the sys-
tem:

v4 speakers: Balance (left / right)

v 7 speakers: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones (valid for 7
speaker system):

v Manual (Driver and All)

v Automatic depending on the seats oc-
cupied. 1)
Equipment name: Media System
2) Equipment name: Connect System.
182

Introduction
Optional sound system
The inf ot
ainment system can be extended
with an optional sound system as follows:

v 10 speakers in different locations and with
different power levels (watts).

v External amplifier (340 W Ethernet), which
processes the audio signals sent by the
central computer.

v Excitation of speaker channels through
class AB final stages.

v Audio signal processing in digital internal
signal processor (DSP).

v Independent subwoofer in the luggage
compartment.

v Setting options:

v User equaliser: 5 bands.

v Equaliser settings predefined by BEATS®
(Signature, Active, Immersive and Voice).

v Sound distribution: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones:

vManual (Driver, Front and All)

v Automatic depending on the seats oc-
cupied.

v Subwoofer volume.

v Surround settings. Connectivity Wi-Fi

v Wi-Fi conf orming t

o IEEE 802.11 b/g/n.

v Transfer in 2.4 GHz and 5 GHz.

v Three Wi-Fi modes at the same time:

v Tethering (2.4 GHz).

v 2.4 GHz access point.

v Connect System:

v Simultaneous connection of up to 8 Wi-Fi
devices.

v Media System:

vSimultaneous connection of up to 2 Wi-Fi
devices.

v Connect System:

v Internet connection via Wi-Fi:

vTethering through the customer's
phone.

v Customer access point (clients) in the
vehicle.

v Media System:

vInternet connection via Wi-Fi:

vApple CarPlay wireless.

v Apple CarPlay and Android Auto over Wi-Fi.

v Pairing process simplified by WPS or QR
code.
Bluetooth® profiles
There can be a maximum of two mobile devi-
ces connected to the Bluetooth® hands-free and a third device connected to the Blue-
t
ooth® as a music pl

ayer.
When a mobile phone is connected to the tel-
ephone management system, a data ex-
change takes place via one of the Bluetooth®
profiles.

Infotainment system
Data transfer
SEAT CONNEC T
Intr
oduction To use it, SEAT CONNECT must first be activa-
t
ed online by ent

ering into a SEAT CONNECT
contract with SEAT, S.A. and is subject to a
temporary use limitation depending on the
country.
Both the SEAT CONNECT service portfolios
offered by SEAT and individual services can
be modified, cancelled, deactivated, reacti-
vated, renamed and extended, even without
prior notification.
In https://my.seat you can create the user
account, see the description of services and
more information.
The execution and availability of the SEAT
CONNECT services and service portfolios
may vary depending on the country, as well
as the vehicle, its equipment and connectivi-
ty. Connectivity statuses )
(whit
e) Full connectivit
y, all services active
) (gr
ey) Limit
ed connectivity, some services
may not be av ail
able.
no icon No connectivity, no services availa-
bl
e

. SEAT CONNECT's voice recognition or search
t
echnol

ogy does not recognise or offer re-
sults for all words.
There are SEAT CONNECT services for which
registration is mandatory and others for
which it is not mandatory.
Description of services
Before running SEAT CONNECT services,
read and take into account the description of
the corresponding services. Descriptions are
updated non-periodically and are available
online at https://my.seat.

Data transfer
SEAT CONNECT services and functions
that do not r equir
e activation
The following services also work without the
activation of SEAT CONNECT:

Infotainment system
Activation of SEAT CONNECT and S-
PIN Activating SEAT CONNECT
The f
oll
owing steps are necessary for the ac-
tivation of SEAT CONNECT (including regis-
tration):

Infotainment system
the SEAT, S.A. data server and the processing
of personal and v ehicl
e data.
Deactivating SEAT CONNECT serv-
ices The following functions are available in the
inf
ot

ainment system to deactivate and acti-
vate SEAT CONNECT services:

Data transfer
y
P ersonal No l
ocation. Only the v
ehicl e data
and user data are used for services.

Incognit oMaximum priv

acy. Y
our services ar e
disabled. Only services required for
legal reasons use data. Setting options are not available in all mar-
k
ets or in all v

ehicle models. Note
If you deactivate each and every SEAT
CONNEC T service

, the OCU may continue
to transmit data. Full Link
Intr oduction With Full Link it is possible to view and use the
cont
ents and functions that ar

e shown on the
mobile phone device on the infotainment
screen.
To do this, the mobile phone device must be
connected with the infotainment system
through a USB interface.
Some technologies can also be used by
Wireless Full Link through the Bluetooth® in-
terface and a Wi-Fi connection. The following technologies may be availa-
ble: