USB Seat Leon 2020 Owner's manual
[x] Cancel search | Manufacturer: SEAT, Model Year: 2020, Model line: Leon, Model: Seat Leon 2020Pages: 399, PDF Size: 6.24 MB
Page 65 of 399

Fuses and bulbs
No. Consumers/Amps
12 Right lights 40
13 Central locking 40
14 Beats Audio CAN and MOST. 30
16 Airbag 7.5
17 SCR, engine relay, 1.5 10
18 KESSY 7.5
19 Instrument panel 7.5
20 Connectivity Box 7.5
21 Rear camera 7.5
24 4x4 Haldex Control Unit 15
25 RGS+EBSS front seat belts 25
26 Right door 30
27 RGS+EBSS front seat belts 25
28 PHEV. Switching off the high voltage
syst
em f
or rescue tasks. Identified
by a yellow label. 10
29 Trailer 15
30 Radio 30
31 Trailer 25
34 230V socket 30
35 Left lights 40
36 Air conditioner fan 40 No. Consumers/Amps
37 Electric rear lid 30
39 Heated steering wheel 10
40 Alarm horn 7.5
41 Gateway 7.5
42 Automatic gearbox lever 7.5
43 Air conditioning and heating con-
tr
ol panel
, rear window heating, AA
compressor 10
44 Diagnosis, handbrake switch, light
s
wit
ch, reverse light, interior light-
ing, lit-up door sill 7.5
45 Steering column 7.5
46 Radio display 7.5
47 Driving mode. 10
48 USB 7.5
52 12V socket 20
58 Parking sensors, parking assist
control unit, fr
ont camera, radar 7.5
59 Reverse switch, clima sensor, elec-
trochr
omic mirror 7.5
60 Diagnosis, headlight control unit,
headlight adjuster 7.5
61
Starter motor; clutch sensor 7.5
65 Sound amplifier 10 No. Consumers/Amps
66 Rear window wiper 15
67 Heated rear window 30 In-line fuse/Amps
230 V rear power sockets 30
Electric driver
Page 158 of 399

Operation
USB power sockets
Depending on the equipment and the coun-
try, the v ehicl
e may also have USB connec-
tions exclusively for charging or as a power
socket.
These USB ports are located at the rear of
the console, between the front seats . These
connectors can work at a maximum power of
up to 10.5 W per port.
They are not intended for file playback.
230 volt power socket*
With the engine running, the power socket
››› Fig. 148 activates automatically as soon
as a connector is plugged in. If there is
enough power available, the socket can still
be used while the engine is off ››› Connect an electrical device: Open the co
v-
er and insert the plug int
o the power socket
as far as possible to unlock the built-in child
lock. The socket only supplies power once
the child lock is unlocked. LED on the power socket
Steady green
light: The childproof lock is unlocked.
The sock
et is r
eady to operate. LED on the power socket
Flashing green
light: The ignition is switched off, but
ther
e is enough po
wer available
to continue supplying the socket
with current for a maximum of 10
minutes. If the connector is un-
plugged before this time elap-
ses, the socket is disconnected
and cannot be used again until
the ignition is switched on again.
Flashing red
light: There is an anomaly, e.g. dis-
connection due t
o a curr
ent
surge or overheating. Disconnection due to overheating
When the t
emper
ature exceeds a certain val-
ue, the 230 volt socket inverter is automati-
cally disconnected. The disconnection pre-
vents overheating when the power consump-
tion of the connected devices is excessive or
the ambient temperature is very high. The
230-volt power supply can be used once
again after a cooling time. First unplug the
connector of the connected device and then
plug it back in again. This prevents the elec-
trical device from being switched on again if
this is not wanted. WARNING
The electrical system is under high voltage!