light Seat Leon 5D 2007 COMMUNICATION SYSTEM

Communication9
Controls and equipment
– To access the phone book ⇒page 8, fig. 6. First, access the tele-
phone menu ⇒page 6, fig. 3 , by pressing the key “answer” .
To move through the menu, use the rocker switch and sel ect
using the key or press “answer” . Select phone book.
Once selected, the operation is the same for selecting a name.
– For an incoming call the display indicates ⇒page 8, fig. 7 . To
accept the call press or select “Accept” with the rocker switch .Dialogue
The voice command system can be activated via the “press to
talk” key on the phone adapter or the key on the multi-func-
tion wheel.In this manual, Dialogue is defined as the time in which the speech control
system may receive vocal commands and provide assistanc e for completion
of different functions in case the user is hesitant and u nsure how to proceed.
The system also responds by vocal messages. The d ialogue is activated and
deactivated by pressing the “talk button” .
If a call is received then the dialogue is interrupted immediately. The call may
be accepted by pressing the key “answer” on the multi -function steering
wheel.
Assistance from the system
If a command is not recognised by the system, it will answer with the cue
and the command can then be given onc e again clearly. After a
third failure the system will answer with and the dialogue will be
ended. Note the following to ensure that you are properly un
derstood:
•
Speak in a normal tone and without pauses or exaggerated pronuncia-
tion.
•
Avoid poor articulation of words.
•
Keep the doors, windows and sun roof closed if poss ible to avoid back-
ground noises that might affect the system.
•
Keep the air vents directed away from the microphone (located on the
interior light).
•
At high speeds, you might need to speak louder to drown out background
noises.
•
Avoid other noises in th e vehicle during a dialogue (e.g. other passengers
speaking in the vehicle).
•
Avoid speaking when the system is saying a cue.
•
The hands-free microphone is directed towards the dri ver, therefore, only
the driver should try to operate the system.
•
To make a call when there is heavy background noise w e recommend
using the speech controlled telephone book instead of speaking individual
digits. This will help avoid mistakes when specifying teleph one numbers.

AB
AA

AB

Sist Comunicacion_ing Seite 9 Dienstag, 13. März 2007 5:30 17

Communication21
Controls and equipmentinstructions for completing this operat
ion should be found in the instruction
manual for the telephone.
The final step for establishing the connection is the introduction of the PIN
code into the hands-free system (initial ly 1234). If you would like to change
the PIN code for the SEAT_UHV system then contact an official SEAT work-
shop. Once the PIN code is input then the connection is es tablished and the
system can be used with the Bluetoot h system. The moment that the connec-
tion is established, the hands-free kit will emit an acute sou nd.
Once the initial configuration process is finished, ea ch time the telephone is
within range of establishing a Bluet ooth connection with the hands-free
system this will be done automatically as long as the ignition i s on and
without any need to configure the connection further .
The connection between the telephone an d the hands-free system will not be
established if this system is already communica ting with another phone.
If there are two or more Bluetooth telephones within c ommunication range of
the hands-free system then the system will connect with the one that was
most recently connected.
WARNING
•
When your mobile phone establishe s a connection with the hands-free
system, it emits both a visual and audible signal.
•
It should be noted that when drivin g at night with the radio off, the
visual signal involves the screen lighting up for appro ximately 3 seconds.Note
It is important to personalise the device PIN code using a personal 4 digit
code. Consult an official SEAT workshop.
Radiophones and business equipmentRadiophones and fixed installation business equipmentRadiophones
Any retrofit installations of radiophones in the veh icle require prior approval.
SEAT generally authorises in-vehicle installations of appro ved types of radio-
phones provided that:•
the aerial is installed correctly,
•
the aerial is installed on the exterior of the vehicle (and sh ielded cables
are used together with non-reflective aerial trimming),
•
the effective transmitting power does not exceed 10 Watts at the aerial
base.
Your Authorised Service Centre will be able to inform y ou about options for
installing and operating radiophones with a higher transmitting power.
Business equipment
The retrofit of domestic and business equipment is permitted provided that
these do not have an effect on the concentration of the driv er and that they
are CE approved. Equipment retrofitted to the vehicle th at may have an effect
on the concentration of the driver must come with a s pecific licence for this
type of vehicle and with the symbol CENote
•
The posterior fitting of electric and el ectronic equipment in this vehicle
affects its licence type and could lead to the with drawal of the vehicle regis-
tration document under certain circumstances.
•
We would request that you pay special attention to th e instructions
regarding the use of mobile telephones and radio tran smitters.
Sist Comunicacion_ing Seite 21 Dienstag, 13. März 2007 5:30 17