air condition Seat Leon 5D 2007 Maintenance programme

SEAT maintenance programme
8SEAT maintenance programmeGeneral informationThis maintenance programme will inform you of the w ork that should be
carried out regularly on your vehicle in order to ensure th e safety, reliability
and durability required.
Using the “vehicle id entification” data or the data in this document, will
ensure the correct spare parts for your vehicle are sp ecified in case of repairs,
for many years after the initial purchase.
We recommend that you keep this maintenance progr amme with the vehicle
documents. The record of inspections carried out is on e of the essential
requirements for exercising your rights under warranty.
The maintenance programme shows the date of deli very, and this indicates
the starting date of the vehicle warranty.Maintenance ProgrammeThe SEAT maintenance programme consists of the dif ferent inspection serv-
ices which are carried out according to the time since the vehicle purchase or
the mileage.
Each Inspection Service, as well as any additional oper ation required already
has a pre-established work time. This will allow you to know the total cost of
the service beforehand.
The SEAT Service Centre network is equipped with modern works hop tech-
nology and well-trained specialists. Many SEAT Service C entres offer different
service packages at special prices.
Adverse conditionsThe Service Centre “service advisor” will inform you o f any necessary addi-
tional work within the intervals defined by the Inspection S ervice, according
to the conditions and environment in which the vehicle i s used. For example,
an oil change where the vehicle is used only for frequent short journeys or is
subject to extreme temperatures. Likewi se, when the vehicle is used in dusty
conditions the air, dust and pollen filter cartridges must be changed more
often and the timing belt checked.Diesel fuelThe Service Centre “service advisor” can provide information about which
countries use fuel with a high sulphur content. In th ese cases, the oil must be
changed every 7,500 km (5,000 miles).
Caution
•
Vehicles with the label “UNSUITABLE FOR BIODIESEL” on th e fuel cover
cannot be driven using biodiesel.
•
To be certain if your vehicle can be used with biodiesel according to the
DIN EN 14214 (FAME) standard consult your Serv ice Centre.
•
DIN is a German abbreviation for “Deutsches I nstitut für Normung e.V.”,
the German standards institute.
•
EN means European Norm.
•
FAME is the English abbreviation “F atty Acid Methyl Ester”

General programme for Inspection Services
12•
Front/rear lights, luggage compartment lighting, indic ators and hazard
lights: Check operation.
•
Windscreen wiper and headlight wiper system: Check operation and look
for possible damage, fill if necessary.
•
Exhaust installation: Check attachments and check fo r leaks and damage.
•
Battery: Check
•
Self-diagnosis: Check fault memory in all systems.
•
Poly-V belt: Check condition.
Inspection Service every 60,000 km (40,000 miles) or every 4 yearsOperations to be performed on your vehicle:•
Exhaust installation: Check attachments and check for leaks and damage.
•
Steering system ball joints: Check attachments and c heck for leaks and
damage. Check for play.
•
“Next service” label: Write the date and mileage, and att ach it to the door
frame.
•
Automatic gearbox (differential): Check the oil level, top up if necessary.
•
Automatic gearbox: Check ATF level.
•
Manual gearbox: Check the oil level (only in the case of permeability).
•
Battery: Check
•
Brake system: Check for leaks and damage.
•
Front and rear brake pads: check
•
Brake fluid level, according to brake pad wear: Check.
•
Self-diagnosis: Check fault memory in all systems.
•
Front/rear lights, luggage compartment lighting, indicators and hazard
lights: Check operation.
•
Poly-V belt: Check condition.
•
Poly-V belt: Check tension (only engines without automatic tension
roller).
•
Cooling system: Check the levels of the coolant and anti-freeze.
•
Engine and engine compartment components: Check f or leaks and
damage (from above).
•
Engine and components in engine compartment, gearbox and steering
knuckles: Check for leaks and damage (from above).
•
Engine oil and oil filter: Replace.
•
Haldex clutch: Replace oil.
•
Test drive: Check brake operation, handbrake, gearbo x operation,
steering system operation, kick-down (for automatic gearbox), air condi-
tioning and sliding roof.
•
Interior and glove compartment lighting, cigarette lighter, warning lights
and horn: Check operation.
•
Tyres, including the spare wheel: Check surface, tread and tyre pressure.
•
Headlights: Check adjustment.
•
Windscreen wiper and headlight wiper system: Check oper ation and look
for possible damage, fill if necessary.
•
Sliding roof: Check operation, clean guttering and lubricate guides.
•
Service interval indicator on the instrument panel: Reset.
•
Door and tailgate hinges: Lubricate.

General programme for Inspection Services13
•
Underbody protection: Visual check for damage
Additional workIn addition to the Inspection Service, additional main tenance jobs may have
to be carried out, depending on the conditions in wh ich your vehicle is used
and on the equipment carried. This additional work sh ould be carried out in
accordance with time/distance travelled to ensure your vehicle remains reli-
able. Your Service Centre will provide detailed informa tion about the addi-
tional work that may be necessary. This can be done indep endently of the
obligatory services, taking into account the notes in the Mai ntenance
Programme (or the label: Next service). Your SEAT Service Centre will be
happy to advise you and quote the prices for this addition al work. Additional
jobs completed are marked on the workshop sheet with the receipt.Every 7,500 km (5,000 miles)•
Engine oil and oil filter: Replace (only engines using high sulphur content
diesel fuel).
•
Fuel filter: Replace (only TDI engines using diesel fuel w ith a high sulphur
content).
Every 30,000 km (20,000 miles)•
Fuel filter: Replace (only diesel engines using biodies el, or using fuel that
does not comply with the DIN EN 590 standard)
Every 60,000 km (40,000 miles)•
Air filter: Clean casing and replace filter element (only 125 kW diesel
engines).
•
DSG Gearbox: Replace oil and filter.
•
Dust and pollen filter for the passenger compartment: R eplace.
•
Spark plug: Replace (except 2.0 TFSI engine)
•
Haldex clutch: Replace oil.
Every 90,000 km (60,000 miles)•
Air filter: Clean casing and replace filter element (except 125 kW diesel
engines).
•
Fuel filter: Replace (only diesel engines using fuel comp lying with the DIN
EN 590 standard)
•
Spark plug: Replace (2.0 TFSI engine)
At 90,000 km /60,000 miles (the first time), then every 30,000 km (20,000 miles)•
Camshaft timing belt: Check condition and replace if required (only petrol
engines).

Warranty17
WarrantyFault-free operation warrantyAccording to the clauses of the warranty applied to SE AT vehicles in the sales
contract, A fault-free operation warranty of 2 years in acc ordance with legal
requirements
2) 3)
is provided from the date of delivery.
We hope that it is understood that natural wear as well as damage caused by
the abuse of vehicle performance through inappropri ate use or by unaccept-
able modifications are excluded from the warranty. The warranty is also
invalid when the vehicle is damaged by the use of part s and accessories that
are not SEAT approved or damage due to ignoring the maintenance and repair
requirements.
Paintwork and body warrantyAuthorised Service Centres provide a warranty on bodywork
and paintwork for vehicles sold in the EU.In addition to the warranty conditions for brand new S EAT vehicles (as
detailed in the purchase contract), a defined period warranty i s also provided
covering paintwork and bodywork rusting:•
3 year paintwork warranty following delivery date (ex cept the Alhambra
model).
•
12 years from the date of delivery against bodywork through-rusting (6
years for the Alhambra).
If, however, this type of damage should occur, it w ill be repaired free of charge
including parts and labour by any SEAT Authorised Service C entre in Europe.
Warranty claims will not be accepted in the following c ircumstances:
•
if damage is caused by external influence or carelessness , or
•
if damage to the body is not repaired promptly and appropriately in
accordance with the manufacturer's in structions using genuine, approved
spare parts and materials, or
•
if perforation rusting is caused by the use of non-genuine p arts and mate-
rials for body repairs and if these repairs were not c arried out in accordance
with the manufacturer's instructions.
If the bodywork is repaired or painted, your Authorised Service Centre will
certify your warranty against through-rusting for the r epaired sections.
Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your dis posal, offering you
the possibility to update entire assemblies, the most co mmon being: the
short engine block, gearboxes, cylinder heads, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same SEAT approved s pare parts warranty.
2)The warranty is not available for all export markets. For more information, please ask
your Authorised SEAT Service Centre.3)As well as the legally required warranty, SEAT o ffers an extended warranty to their cli-
ents in some European countries. The specific co nditions of this extended warranty
are detailed in the vehicle sales contract.