manual radio set Seat Leon 5D 2008 MEDIA SYSTEM 2.2

MEDIA function selection button41
MEDIA-IN multi-media interface (MDI)Description
The MEDIA-IN multi-media interface provides users with a
USB connector and an AUX connector. Depending on the
vehicle, this interface is located in the central console or
underneath the central armrest between the front seats.
Depending on the vehicle's unit, the following is possible from the radio-navi-
gation unit through the MEDIA-IN interface:•
Play and operate audio files from a mass storage medium or MP3 player
with USB connection. The MEDIA-IN multi-media interface supplies the usual
USB voltage of 5 volts.
•
Play and operate audio files from an iPod. In this case, the iPod must be
connected using the cable or special SEAT adapter support. In the case of the
León, the "AUX2 Input" option must be enabled in the Media Settings menu
(MEDIA →SETUP) for audio playback of an iPod.
•
Play audio files from an external medium connected to the AUX socket.
External audio sources connected to the AUX socket of the MEDIA-IN interface
can be played through the radio-navigation system but cannot be operated.
Consult the specific manufacturer's instruction manual for operating the
external audio source. The external audio source will continue to play until it
is switched off, despite another source starting to play in the radio-navigation
system. In the case of the León, the "AUX2 Input" option must be selected in
the Media Settings menu (MEDIA →SETUP) for audio playback of a device
connected to the AUX socket.
Fig. 32 MEDIA-IN socket
in ALTEA, ALTEA XL, ALTEA
FREETRACK, TOLEDO.
Fig. 33 MEDIA-IN socket
in LEON.
media_system_ingles.book Seite 41 Donnerstag, 5. Februar 2009 3:31 15

MEDIA function selection button
42•
If the vehicle is equipped with a Rear Seat Entertainment system, audio
from a portable multi-media device connected to the AUX RSE socket can be
played through the radio-navigation system. To play audio from a device
connected to this socket, enable the "AUX2 Input" option in the Media
Settings menu (MEDIA →SETUP) . Make sure no other multi-media device or
audio cable is connected to the MEDIA-IN interface, as these take playback
priority over the AUX2 input. Refer to the Rear Seat Entertainment system
manual for further information.
WARNING
The risk of injury during a sudden braking manoeuvre or in an accident is
increased if the glove compartment cover or armrest is open.•
Always keep the glove compartment and armrest closed while the
vehicle is in motion.WARNING
Loose objects inside the vehicle may obst ruct the driver and lead to serious
injuries.•
The external audio data medium must never be placed on the instru-
ment panel. A sudden driving manoeuvre could cause the device to be flung
through the vehicle interior and injure occupants.
•
The external audio source must never be placed close to an airbag. If an
airbag is triggered, the device could be flung towards the compartment and
injure the vehicle passengers.
•
Occupants must not have the data medium in their hands or placed on
their legs while the vehicle is in motion. A sudden driving manoeuvre could
cause the device to be flung through the vehicle interior and injure occu-
pants.
•
The wires connecting the external data medium must be arranged so
they do not obstruct you when driving.
Note
•
Only audio files readable through th e MEDIA-IN socket will be displayed
and played. Where a medium connected contains damaged files or files in
unreadable formats, these will not be displayed.
•
USB connection takes priority over the MEDIA-IN interface AUX socket.
Either of these, or an iPod adapter where applicable, takes priority over the
AUX RSE socket. Therefore, to play audio from a medium connected to the
AUX RSE socket, make sure there is no device or cable connected to the
MEDIA-IN interface.
•
You can disconnect the connection with the external medium whenever
required without losing data, independent to the indications of the external
data media.
External data media requirements •
The unit only supports external data media and USB mass storage devices
that comply with the USB 2.0 specifications.
•
External data media must use a FAT file system, either FAT16 (< 2 GB) or
FAT32 (> 2 GB) (FAT: File Allocation Table)
•
In the case of MTP players (Media Transfer Protocol), which have the
“PlaysForSure” or “ReadyForVista” logo, factors such as the battery status
and the quantity of data may affect the way these devices respond to commu-
nication via the MEDIA-IN multi-media in terface. It may take several minutes
before the MTP player is ready to play.
•
When playing files from large hard drive memories with many files and
complex file structures (a large numbe r of folders and subfolders, non-play-
able files, etc.), there may be delays in the reading of audio files. The
connected device may also affect the unit's response time.
•
The folder structure on the external data medium should not have more
than eight folder levels. A folder should not contain more than 1000 items.
media_system_ingles.book Seite 42 Donnerstag, 5. Februar 2009 3:31 15

MEDIA function selection button
44
Connecting a mass storage device or MP3 player with USB
connection
– Connect the device to the USB connector of the MEDIA-IN inter-face.
– If necessary, start playback on the external medium.
Connecting an iPod
– Connect the iPod using the cable or special SEAT adapter support.
– In the case of the León, the "AUX2 Input" option must be enabled in the Media Settings menu (MEDIA →SETUP) for audio playback
of an iPod.
Connecting an external medium to the AUX socket
– Connect the medium to the AUX socket of the MEDIA-IN interface using the appropriate cable.
– In the case of the León, the "AUX2 Input" option must be selected in the Media Settings menu (MEDIA →SETUP) for audio playback
of a device connected to the AUX socket.
Handling via the radio-navigation system
– Press the “MEDIA” function selection button to open the MEDIA main menu.
– Press the “MEDIA" function selection button again if the main menu is not directly opened.
– Select the “MDI” source from the MEDIA main menu. – Further operation of the external data medium-
USB or iPod-
(changing track, selecting tracks and playback modes such as
scan and random play) is described in the appropriate chapters
of this manual - “Opening and operating media sources”.
– If an iPod is connected to the MEDIA-IN multi-media interface, a special iPod selection menu opens at the highest selection level,
allowing you to call up the iPod specific directories.
iPod
The selection menu for controlling a connected iPod always has the same
structure and can be operated in the usual way. Other aspects of operation
are the same as for a media source with MP3 files inserted into the radio-navi-
gation system.
Direct operation of the connected iPod is disabled while it is connected to the
multi-media interface.
When an iPod is connected, it is possible to adjust the input volume of the
multi-media interface.
Pressing the function sel ection button opens the Media settings
menu. There you can adjust the input volume by pressing the
function button, similar to the adjustment of the ⇒ page 33,
“Adjusting the output volume”.
Error messages and anomalies
The following error message may appear on the screen after an external data
medium is connected to the unit.
If the message “ Device is not supported” appears, then the external data
medium cannot be operated with the radio-navigation system or the adapter
cable used is not suitable. Check whether you are using the correct adapter
cable or, if possible, update the software of the external data medium and the
MEDIA-IN multi-media interface.
SETUP
 MDI volume
 AUX volume
media_system_ingles.book Seite 44 Donnerstag, 5. Februar 2009 3:31 15

NAV (navigation system) function selection button 77
Contents of the map view
The
 symbol indicates the vehicle's position and heading ⇒ page 76,
fig. 67.
During route guidance the navigation rout e is shown as a blue line. The next
road to take is displayed in the top line of the screen.
While the function buttons are not displayed ⇒page 76, fig. 68 , the road you
are currently on appears in the bottom line.
The remaining distance to the final destination is displayed next to
 on the
left in the bottom line of the screen and, depending on the settings, either the
expected time of arri val or the remaining driving ti me is displayed on the right
next to
 ⇒ page 83, “Changing the time display”.
Shortly before you reach a turning point, a turning arrow appears on the left
of the screen indicating the direction to turn. The distance to the turning point
is displayed below it.
If the vehicle position symbol
 turns grey and the map view stops moving,
the unit is currently unable to determine the vehicle's exact position (for
example, in a car park).
Navigation announcements during the journey
You will hear the first announcement after the route has been calculated, for
example, “Follow the layout of the road”. Up to three announcements will be
made before a turn has to be made to ensure that you are informed in time,
for example, “Approaching left turn”, “Turn left in 1000 feet” and “Now turn
left”.
The distances indicated depend in large part on the type of road on which you
are driving. On motorways, the first announcement is given some 2,000
metres before an exit.
On multiple-lane roads that fork, the corresponding messages are emitted,
for example, “Approaching left turn” and then “Now turn left”.
Some 1000 feet before entering a roundabout, you will be told which exit to
use, for example, “Leave at the second exit”. In a roundabout, the indication may be “Turn at the second right”. In the case of a large roundabout, a third
announcement “Turn right now” will be
given while you are on the rounda-
bout.
When you reach your destination, you will hear the announcement: “You have
reached the destination”.
If the option “Dynamic route” is ticked in the route options, you will be
informed of any reported traffic congestion along your route ⇒page 74. You
will receive an additional announcement if the route is recalculated due to
traffic congestion ⇒ page 80.
A corresponding message will be given if you have manually excluded route
sections ⇒page 79.
Settings for audible navigation indications
During a navigation announcement, you can change the volume using the
volume control ⇒page 3, fig. 1 up to a defined minimum or maximum
volume. Subsequent audible indications will be emitted at that volume.
You can also adjust or switch off the preset navigation announcement volume
in the Navigation settings menu ⇒page 82 or in the menu for volume
settings ⇒page 12 or even suppress the sound.
WARNING
Please observe the laws of road traffic legislation when following the
recommendations made by your radio and navigation system.•
It is fundamental that you are sufficiently alert while driving. Any
distraction may lead to an accident, with the risk of injury.
•
Always observe the safety information on the use of the navigation
system ⇒page 47.
A1
media_system_ingles.book Seite 77 Donnerstag, 5. Februar 2009 3:31 15

Index
92
manually excluding . . . . . . . . . . . . . . . . . . . . 79
navigation announcements . . . . . . . . . . . . . 77
opening destination entry overview . . . . . . 53
partially digitised areas . . . . . . . . . . . . . . . . 48
position information . . . . . . . . . . . . . . . . . . . 69
route guidance . . . . . . . . . . . . . . . . . . . . 73, 77
route list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
safety information . . . . . . . . . . . . . . . . . . . . . 47
selecting points of interest . . . . . . . . . . . . . . 63
setting route options . . . . . . . . . . . . . . . . . . 74
short route . . . . . . . . . . . . . . . . . . . . . . . . 74, 75
store position . . . . . . . . . . . . . . . . . . . . . . . . 69
storing/editing the home address . . . . . . . . 71
Navigation CD . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Navigation data copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Navigation display adjusting the volume . . . . . . . . . . . . . . . . . . 12
Navigation system announcements navigation system recommendations . . . . . 76
Navigation system recommendations repeating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
OOperatingfactory settings . . . . . . . . . . . . . . . . . . . . . . . 11
Operating CD players CD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Operating manual
information . . . . . . . . . . . . . . . . . . . . . . . . . . 10
structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
unit appearance . . . . . . . . . . . . . . . . . . . . . . 11
Operation whilst the vehicle is in motion . . . . . . . . . . . . 6
output volume AUX-IN socket . . . . . . . . . . . . . . . . . . . . . . . . 33
PPetrol stationsearch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Playlists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Points of interest . . . . . . . . . . . . . . . . . . . . . . . . . 63
pop-up window . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Presentation in this manual . . . . . . . . . . . . . . . . . . . . . . . . 10
modification . . . . . . . . . . . . . . . . . . . . . . . . . 11
Provision of navigation recommendations . . . . 76QQuick reference guide . . . . . . . . . . . . . . . . . . . . . . 3RRADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 changing station . . . . . . . . . . . . . . . . . . . . . . 15
main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
opening the FM station list . . . . . . . . . . . . . . 15
scan function . . . . . . . . . . . . . . . . . . . . . . . . . 17 scanning stations (scan function) . . . . . . . . 17
selecting stations from the FM station list . 16
station buttons . . . . . . . . . . . . . . . . . . . . . . . 19
station name . . . . . . . . . . . . . . . . . . . . . . . . . 21
station scanning . . . . . . . . . . . . . . . . . . . . . . 17
station tracking . . . . . . . . . . . . . . . . . . . . . . . 21
stored radio stations . . . . . . . . . . . . . . . . . . . 20
storing radio statio
ns . . . . . . . . . . . . . . . . . . 19
traffic news TP (Traf Programme) . . . . . . . . . 23
tuning stations manually . . . . . . . . . . . . . . . 18
Radio changing frequency band . . . . . . . . . . . . . . 14
Radio text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Random play (Mix) MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 radio text . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
RDS regional . . . . . . . . . . . . . . . . . . . . . . . . . 22
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Requirements data media . . . . . . . . . . . . . . . . . . . . . . . . . . 25
file formats . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Resetting factory settings . . . . . . . . . . . . . . . . . . 11
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Route guidance . . . . . . . . . . . . . . . . . . . . . . . 73, 76 Navigation announcements . . . . . . . . . . . . . 77
repeating navigation system recommendations76
resuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
media_system_ingles.book Seite 92 Donnerstag, 5. Februar 2009 3:31 15