audio Seat Leon 5D 2017 Appendix Digital Cockpit

View 1, 2, 3 or AUTOMATIC*View 1, 2, 3 or AUTOMATIC*1)
Customising the information displayed in the central area of the circular clocks. Only 2 of
these items of information can be displayed
at the same time, but the user chooses which
to display, and in what order, by moving the finger vertically over the dials.●
Consumption . Graphic representation of
current consumption and digital display of
average consumption.
●
Acceleration . Graphic representation of lon-
gitudinal and transverse acceleration.
●
Audio : Digital display of current audio play-
back.
●
Height . Digital display of current height
above sea level.
●
Compass . Digital compass display.
●
Information on arrival at destination . Digi-
tal display of remaining travelling time, dis-
tance to destination and estimated time of
arrival.
●
Operating range . Digital display of remain-
ing operating range.
●
Travelling time .
●
Route guidance .
●
Journey. Digital display of the route.
●
Assist systems . Graphic representation of
different assist systems.●
Traffic signs . Display of detected traffic
signs.
●
Navigation . Graphic representation of navi-
gation using arrows.
Depending on the equipment, the number
and content of the selectable information
profiles may vary.
Navigation map in the SEAT Digital
Cockpit*
Fig. 2
Infotainment System: map transfer but-
ton
Depending on the equipment, the SEAT
Digital Cockpit may display a detailed map.
To do this, select the Navigation menu op-
tion on the instrument panel ››› page 4 .
Depending on the equipment, the navigation
map may be displayed in the SEAT Digital
Cockpit or in the Infotainment System or in
both at the same time. If only displayed in
the Infotainment System, the SEAT Digital Cockpit will only display the manoeuvre ar-
rows.
Navigation map transfer
Using the map transfer button ››› Fig. 2 , the
map is transferred from the Infotainment Sys-
tem to the SEAT Digital Cockpit and vice ver-
sa.
Using the right thumbwheel of the multifunc-
tion steering wheel, while in the Naviga-
tion menu, the map can be transferred
again to the Infotainment System.1)
Preset information depending on the selected
“Driving Mode”.
2

Compass displayCompass display
Depending on the equipment, when the igni- tion is switched on, the direction in which
you drive is displayed on the instrument pan-
el display with a symbol, e.g. NW for North-
west.
When the Infotainment System is turned on
and there is no active guide to the destina-
tion, the graphic representation of a compass
is also displayed.
Low-consumption driving 
When driving, it is displayed on the instru-
ment panel  if the vehicle is in low-con-
sumption status.
Distinctive letters for engine (DLE)●
Select the Operating range
information
profile on the instrument panel (Infotainment
button 
/ 
> function button
Vehicle
> View > Driving data > Operating
range ).
●
Press and hold the  multifunction steer-
ing wheel button until the Service menu is
displayed on the instrument panel display
››› page 5
.
●
Select the Distinctive letters for
engine menu option.
WARNINGEven when outside temperatures are above
freezing, some roads and bridges may be icy.●
The “snowflake symbol” indicates that
there may be danger of frost.
●
At outside temperatures above +4°C (+39°
F), there could also be ice even when the “snowflake symbol” is not lit up.
●
Do not rely only on the outside temperature
display!
Note● Different instrument panels are available
and therefore the versions and instructions
on the display may vary. In the case of dis-
plays without information or warning texts,
faults are indicated exclusively by the control
lamps.●
Some indications on the instrument panel
display may be concealed by a sudden event,
e.g. an incoming call.
●
Depending on the equipment, some set-
tings and instructions can also be adjus-
ted/made or displayed in the Infotainment
System.
●
If there are several warnings, the corre-
sponding symbols will light up successively
for a few seconds. The symbols will remain lit
until the cause is eliminated.
●
If, when the ignition is switched on, warn-
ings about existing faults are displayed, it is
possible that adjustments cannot be per-
formed and information cannot be displayed
as described. In this case, go to a specialised
workshop and request the repair of the
faults.
Instrument panel menus
The number of menus and informative dis-
plays available will depend on the vehicle’s
electronic system and equipment.
A specialised workshop will be able to pro-
gramme other functions or change the exist-
ing ones, depending on the vehicle equip-
ment. SEAT recommends visiting a SEAT deal-
ership for this.
Some menu options can only be opened
when the vehicle is at a standstill.
■ Driving data
››› page 5
■ Assist systems .
■ Lane Assist On/Off
■ Front Assist On/Off
■ Blind Spot Monitor On/Off
■ ACC (only display)
■ Navigation
››› Booklet Infotainment System
■ Audio
››› Booklet Infotainment System
■ Telephone
››› Booklet Infotainment System
■ Vehicle status
››› page 6
■ Lap timer *
4

Multifunction steering wheel*Multifunction steering wheel*Operating audio, telephone and navigation with voice control
3 Valid for vehicles with SEAT Digital Cockpit (digital panel).
Fig. 6
Controls on the steering wheel.
The steering wheel includes multifunction
modules from where it is possible to controlthe audio, telephone and radio/navigation
functions without needing to distract the
driver.ButtonRadioMedia (except AUX)AUXTelephonea)Navigationa)ATurnTurn volume up/down. You donot need to be in audio mode(radio).Turn volume up/down. You donot need to be in audio mode(media).Turn volume up/down. You donot need to be in audio mode(media).Turn volume up/down. You donot need to be in telephonemode.Turn announcement volumeup/down. You do not need tobe in navigation mode butthere has to be an announce-ment active when you adjustthe volume.APressMute volume.Mute volume.Mute volume.Mute an incoming call.Mute the current navigation an-nouncement.Ba)Enable/disable voice controlb).This function can be performed from any mode, except if there is an active call.
»9

Operating audio, telephone and navigation with voice controlButtonRadioMedia (except AUX)AUXTelephonea)Navigationa)C/DSearch for the previous/nextstationc).Short press: Switch to the pre-vious/next song. Hold down: Fast rewind/for-wardd).No function– No active call: Radio/Mediafunctionality (except AUX) – Active call: no functionNo function for the othermodes (navigation, assistants,vehicle status, lap timer*, driv-ing data).E/Fa)Change menu on instrument panel.b)GShort press: change view Classic Info - Digital Maps - Advanced Info b).Hold down: access the setting view of the “Customised Profiles”b).HTurnList of available functions (au-dio/media).List of available functions (au-dio/media).No function– There is no active call: List oflast calls. – Active calls: access the calloptions list (call on hold, hangup, mute microphone, privatenumber, etc.).– Navi System Plus: Zoomin/out (with and without activeroute). – Navi System: If there is a mapin the Digital Panel: Zoomin/out (with and without activeroute). If there is no map in theDigital Panel: transfer the mapto the Digital Panel (with andwithout active route).HPressNo functionNo functionNo functionNo functionAuto Zoom/Manual Zoom if themap is in the Digital Panel.a)Depending on the vehicle's equipment package.b)This function can be used from any mode (audio, media, navigation, assistants, vehicle status, lap timer*, driving data).c)This action can be performed when you are listening to the radio; there is no need to be in audio-radio mode.d)These actions can be performed when you are listening to media; there is no need to be in audio-media mode.10