Opening and closing
Opening and closing Set of v ehicl
e keys
Vehicle key Fig. 63
Assignment of buttons on the remote
contr ol k
ey. Unlock the vehicle
L
ock the v
ehicle
Unlock only the rear lid. Press the button
until all the turn signals on the vehicle
flash briefly. You have 2 minutes to open
the rear lid. Once this time has passed, it
will lock again. In addition, the lamp on
the key flashes.
Folding the key shaft in and out
With the vehicle key the vehicle may be
locked or unlocked remotely ››› page 73.
1 2
3
4 The vehicle key includes an emitter and bat-
t
ery. The r
eceiver is in the interior of the vehi-
cle. The range of the vehicle key with remote
control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised ››› page 73 or the battery
changed ››› page 72.
Different keys belonging to the vehicle may
be used.
Control lamp on the vehicle key
When a button is pressed briefly on the vehi-
cle key, the control lamp flashes ››› Fig. 63
(arrow) once briefly, but if pressed for a long
period of time, it will flash several times, for
example, in the convenience opening.
If the vehicle key control lamp does not light
up when the button is pressed, replace the
key's battery ››› page 72.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle chassis number is required.
Each new key contains a microchip which
must be coded with the data from the vehicle
electronic immobiliser. A vehicle key will not
work if it does not contain a microchip or the
microchip has not been encoded. This is also true for keys which are specially cut for the
vehicl
e.
The vehicle keys or new spare keys can be
obtained from a SEAT Official Service, a spe-
cialised workshop or an approved key service
qualified to create this kind of key.
New keys or spare keys must be synchronised
before use ››› page 73. WARNING
