check engine Seat Mii electric 2019 Owner's Manual
[x] Cancel search | Manufacturer: SEAT, Model Year: 2019, Model line: Mii electric, Model: Seat Mii electric 2019Pages: 232, PDF Size: 3.82 MB
Page 69 of 232

Instruments and warning/control lamps
Time
Hours and minut es of the instrument panel
cl
ock. The time can be displayed in 12 or 24
hour format. If necessary, an S appears at the
top of the display to indicate that the summer
time is set.
Units
Adjusting the temperature, consumption and
distance units.
Service
Checking service messages.
Factory settings
The default factory setting of some functions
are reset in the S e t t i n g s menu.
Service intervals The inspection indication appears on the in-
strument panel displ
ay
›
›› Fig. 59
2 .
The dat es of the services (i.e
. the next Inspec-
tion Service or change of brake fluid) are de-
tailed on the sticker on the door pillar or in the
Maintenance Schedule.
The set service intervals have been specified
with the service dependent on time/dis-
tance travelled. Inspection reminder
If an inspection expir
es soon, an Inspection
reminder appears in the form of an abbrevia-
tion k and an indication in k m appears when
the ignition is switched on. The number of kil-
ometres shown is the maximum number that
may be driven until the next service.
Service due
After the service date, an audible warning is
given when the ignition is switched on and the
abbreviation k will flash on the display for a few seconds.
Check the service date
With the ignition switched on, the engine off
and the vehicle stopped, the current service
can be checked:
Page 141 of 232

Drive system and driving
Brake energy recuperation Fig. 135
On the selector lever: connect the
br ak
e energy recuperation. Fig. 136
On the instrument panel display: indi-
cation of r ecuper
ation levels. The brake energy recuperation can generate
a br
aking eff
ect. This braking effect depends
on the selected driving programme and the
level of charge of the high-voltage battery. When braking the vehicle and when the vehi-
cle mo
ves by inertia or travels downhill in the
deceleration phase, electric power is gener-
ated by the electric engine and stored in the
high-voltage battery. The electric engine
then operates as an alternator and produces
a engine brake effect. This process is called
brake energy recuperation.
The status of the recuperation is indicated in
the power display of the instrument panel
››› page 61. When recuperation is active, the
needle goes to the green area of the display.
The current recuperation level is displayed on
the instrument panel display ››› Fig. 136.
Given the case, in the application installed on
the smartphone you can view a statistic of
the energy recuperated over the last 30 mi-
nutes. Check the electronic instruction man-
ual of the application for this.
The effect of the engine brake is more or less
intense depending on the level of recupera-
tion. If the recuperation is very intense, the
brake light of the vehicle may also be switch-
ed on. As the charge level of the high-voltage
battery increases, the recuperation reduces
and, thus, the effect of the engine brake.
When the high-voltage battery is fully charg-
ed, no energy recuperation takes place and
the effect of the engine brake is not available.
When the vehicle detects that road condi-
tions do not allow safe contact between the
wheels and the road, the energy recupera- tion is automatically reduced and, therefore,
the effect of the engine br
ake ››› .
Sel ect a r
ecuperation level
There are a total of 4 brake energy recupera-
tion levels. You can switch between recupera-
tion levels 1 to 3 by pressing the selector lever
slightly sideways towards ››› Fig. 135
+ and
- :