engine Seat Mii electric 2019 Owner's Manual

Table of Contents
Braking and parking . . . . . . . . . . . . . . . . . . . . . . . 155
Braking system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Stabilisation and brake assistance sys-
t ems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
157
P
arking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Help with parking and manoeuvring . . . . . 160
Parking distance warning system* . . . . . . . . . 160
Towing bracket device . . . . . . . . . . . . . . . . . . . . 162
Driving with trailer . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Practical tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
High-voltage battery . . . . . . . . . . . . . . . . . . . . . 163
Safety warnings relating to the high-volt-
age network and the high-v
oltage bat-
tery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Charging the high-voltage battery . . . . . . . . . 165
Charging cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Verification and replacement . . . . . . . . . . . . 178
Engine compartment . . . . . . . . . . . . . . . . . . . . . . . 178
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Windscreen washer reservoir . . . . . . . . . . . . . . . 185
12-volt battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Wheels and tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Tyre pressure loss indicator* . . . . . . . . . . . . . . . 195
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 SEAT Maintenance Programme . . . . . . . . . .
197
Service intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Additional service offers . . . . . . . . . . . . . . . . . . . . 198
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 Vehicle maintenance . . . . . . . . . . . . . . . . . . . . . 199
Maintenance and cleaning . . . . . . . . . . . . . . . . . 199
Accessories and modifications to the ve-
hicle

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Accessories, spare parts and repair work . . . 205
Information for the user . . . . . . . . . . . . . . 207
Information for the user . . . . . . . . . . . . . . . . . . . 207
Information stored by the control units . . . . . . 207
Other important information . . . . . . . . . . . . . . . . 208
Information about the EU Directive
2014/53/EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 214 Indications about the technical data . . . . 214
Important information . . . . . . . . . . . . . . . . . . . . . . 214
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
6

Operation
Fig. 61
On the instrument panel display: avail-
abl e po
wer. : Indication displayed complete-
ly. : Indication moved down. When the drive system is connected and
whil
e driving, inf

ormation on the power used
and on the available power is displayed in the
instrument panel display.
Power display
When connecting the drive system before
starting to move, the indicator changes from
 to  ››› Fig. 60.
When the vehicle is moving, the power used
at that moment to move is indicated in the in-
strument panel display (in % PWR x 10)
››› Fig. 60. When the indicator needle is in the blue
zone

, the vehicle is moving with a particu-
larly low energy consumption.
When the indicator needle is in the green
zone, the brake energy and kinetic energy
are converted into electrical energy (en-
ergy recuperation) by the electric drive
system and stored in the high-voltage
battery.
Indication of available power
While driving, the current available power of
the electric engine is displayed on the instru-
ment panel display ››› Fig. 61 . When the in-
strument panel display changes to another
indication, the indication of the available
power moves downwards ››› Fig. 61 .
When all segments are displayed, it means
that the maximum power of the electric en-
gine is available. Having high power available
is necessary for, i.e. accelerating the vehicle
quickly to, for example, overtake safely.
If a lot of power is required for a long period
of time (it is mainly seen because the power
indicator needle is above the low consump-
tion zone) ››› Fig. 60
A ), the time during
which the maximum po w

er is available is re-
duced. In the indication of the available pow-
er, the segments of the E-Max zone turn off
from right to left.
When all segments of the E-Max zone turn off,
it means that the maximum power of the A
B electric engine is no longer available
››

› . If
ther e is still a high demand, the po
wer cur-
rently available is reduced, which is indicated
by the shortening of the Normal zone bar,
starting from the right. Based on the length of
the bar, it is possible to know how much the
drive power has been reduced. If less power
is then used, the available power gradually
increases once again.
Limited availability of power may be related
to driving behaviour, i.e., accelerating the ve-
hicle quickly. In general, the available power
is limited under the following conditions:

Instruments and warning/control lamps
Time
Hours and minut es of the instrument panel
cl
ock. The time can be displayed in 12 or 24
hour format. If necessary, an S appears at the
top of the display to indicate that the summer
time is set.
Units
Adjusting the temperature, consumption and
distance units.
Service
Checking service messages.
Factory settings
The default factory setting of some functions
are reset in the Settings menu.
Service intervals The inspection indication appears on the in-
strument panel displ
ay
›

›› Fig. 59
2 .
The dat es of the services (i.e
. the next Inspec-
tion Service or change of brake fluid) are de-
tailed on the sticker on the door pillar or in the
Maintenance Schedule.
The set service intervals have been specified
with the service dependent on time/dis-
tance travelled. Inspection reminder
If an inspection expir

es soon, an Inspection
reminder appears in the form of an abbrevia-
tion k and an indication in km appears when
the ignition is switched on. The number of kil-
ometres shown is the maximum number that
may be driven until the next service.
Service due
After the service date, an audible warning is
given when the ignition is switched on and the
abbreviation k will flash on the display for a few seconds.
Check the service date
With the ignition switched on, the engine off
and the vehicle stopped, the current service
can be checked:

Air conditioning
Defrost/demist function 
The air dr awn in fr
om outside the vehicle is di-
rected at the windscreen and air recirculation
is automatically switched off. To defrost the
windscreen more quickly, the air is dehumidi-
fied at temperatures over approximately
+3°C (+38°F) and the fan runs at maximum
output.
Windscreen heating |
Press the button to connect and disconnect
the windscreen heating with the engine run-
ning.
Heated rear window 
This only works when the engine is running
and switches off automatically after a maxi-
mum of 10 minutes.
It should be switched off as soon as the glass
is demisted. Lower electricity consumption
has a positive effect on energy consumption.
To avoid possible damage to the battery, an
automatic temporary disconnection of this
function is possible, coming back on when
normal operating conditions are re-establish-
ed.
Air recirculation 
››› page 108 Seat heating [ A
›› › page 108
Switching off
Press the lower button several times

Operating modes
Activate/deactivate mobile phone notifications
when t urning off the engine
.
Select a ringtone (only if the phone is not emitting any sounds).
Bluetooth

Driving
Driving
Driv e syst
em and driving
Driving indications Electric drive system functions. Delivery of power from the electric engine
The maximum t
or

que of the electric engine is
available immediately after pressing the ac-
celerator pedal.
Brake energy recuperation (charging)
When braking the vehicle, electric power is
generated through the electric engine and
stored in the high-voltage battery
››› page 139. This also occurs to a lesser ex-
tent when the vehicle moves by inertia or
drives downhill in the deceleration phase.
As the charge level of the high-voltage bat-
tery increases, the recuperation reduces and,
thus, the effect of the engine brake. When the
high-voltage battery is fully charged, no en-
ergy recuperation takes place and the effect
of the engine brake is not available ››› .
The ener gy r

ecuperation can be displayed
on the instrument panel display or in the ap-
plication installed on the smartphone. Slow travel function
The slo

w travel function consists of driving
slowly, at about 5 km/h (3 mph), forward or
reverse without pressing the accelerator ped-
al.
The slow travel function is activated automat-
ically:

Drive system and driving
Brake energy recuperation Fig. 135
On the selector lever: connect the
br ak
e energy recuperation. Fig. 136
On the instrument panel display: indi-
cation of r ecuper

ation levels. The brake energy recuperation can generate
a br
aking eff

ect. This braking effect depends
on the selected driving programme and the
level of charge of the high-voltage battery. When braking the vehicle and when the vehi-
cle mo

ves by inertia or travels downhill in the
deceleration phase, electric power is gener-
ated by the electric engine and stored in the
high-voltage battery. The electric engine
then operates as an alternator and produces
a engine brake effect. This process is called
brake energy recuperation.
The status of the recuperation is indicated in
the power display of the instrument panel
››› page 61. When recuperation is active, the
needle goes to the green area of the display.
The current recuperation level is displayed on
the instrument panel display ››› Fig. 136.
Given the case, in the application installed on
the smartphone you can view a statistic of
the energy recuperated over the last 30 mi-
nutes. Check the electronic instruction man-
ual of the application for this.
The effect of the engine brake is more or less
intense depending on the level of recupera-
tion. If the recuperation is very intense, the
brake light of the vehicle may also be switch-
ed on. As the charge level of the high-voltage
battery increases, the recuperation reduces
and, thus, the effect of the engine brake.
When the high-voltage battery is fully charg-
ed, no energy recuperation takes place and
the effect of the engine brake is not available.
When the vehicle detects that road condi-
tions do not allow safe contact between the
wheels and the road, the energy recupera- tion is automatically reduced and, therefore,
the effect of the engine br
ake ››› .
Sel ect a r
ecuperation level
There are a total of 4 brake energy recupera-
tion levels. You can switch between recupera-
tion levels 1 to 3 by pressing the selector lever
slightly sideways towards ››› Fig. 135
+ and
- :

Driving
Indication that the drive system is connec-
t ed
The el
ectric engine does not generate no-
ticeable noises neither when connecting the
drive system nor when it is running. Therefore,
it is not possible to recognise whether the
drive system is running based on the engine
noises. Instead, you can recognised that the
drive system is connected by the following
characteristics:

Driving
 - Neutr
al
The el ectric drive system is in the neutral po-
sition. No movement is transmitted to the
wheels and the braking effect of the electric
engine does not occur.
 – Permanent forward drive position
The electric drive system is in the normal pro-
gramme (brake energy recuperation levels
0-3).
 – Very intense brake energy recupera-
tion
Very intense brake energy recuperation is de-
celeration phases (brake energy recupera-
tion level 4).

Drive system and driving
Note
If the selector lever is left for a long time in
a position other than P with the ignition off ,
the 12-v
olt battery may discharge. Driving with an automatic gearbox
Driving down slopes
The st
eeper the sl

ope, the higher the selected
brake energy recuperation level will have to
be. A high recuperation level increases the
braking effect of the electric engine. Never let
the vehicle roll downhill with the selector lev-
er in the neutral position N.