Seat Mii electric 2020 Repair Manual

Instruments and warning/control lamps
WARNING
When the maximum power reserve is not
avail abl
e or the level of charge of the high
voltage battery is low, the driving proper-
ties may vary, i.e. the acceleration behav-
iour of the vehicle.

Operation
the rocker switch on the wiper lever or the ad-
justment butt on on the instrument panel.

Instruments and warning/control lamps
successively for a few seconds and will
stay on until the f
ault is r
ectified.Driving data indicator (multifunc-
tion display)
The display of the travel data (multifunction
display) sho
ws diff

erent values about the
journey and the consumption.
Change from one display to another

Operation

Instruments and warning/control lamps
Time
Hours and minut es of the instrument panel
cl ock
. The time can be displayed in 12 or 24
hour format. If necessary, an S appears at the
top of the display to indicate that the summer
time is set.
Units
Adjusting the temperature, consumption and
distance units.
Service
Checking service messages.
Factory settings
The default factory setting of some functions
are reset in the Settings menu.
Service intervals The inspection message appears on the in-
strument panel displ
ay

Operation
Some menu options can only be read when
the v ehicl
e is st
ationary.
The number of messages displayed on the in-
strument panel display will vary according to
the vehicle electronics and equipment.
A specialised workshop will be able to pro-
gramme or modify additional functions, ac-
cording to the vehicle equipment. SEAT rec-
ommends taking your car in for technical
service.
Instrument panel menus

v Multifunction display

Instruments and warning/control lamps
Note
If when switching on the ignition warnings
are sho wn about e
xisting faults, it might not
be possible to change the settings or show
the information as described. In this case,
go to a specialised workshop and request a
repair. Control lamps
Control and w arning l

ampsThe control and warning lamps are indicators
of w
arnings

Operation
\
A passenger in the rear seats has not
fast
ened their seat belt

Opening and closing
Opening and closing Set of v ehicl
e k
eys
Vehicle key Fig. 63
Assignment of buttons on the remote
contr ol k
ey. Unlock the vehicle
L
ock the v
ehicl

e
Unlock only the rear lid. Press the button
until all the turn signals on the vehicle
flash briefly. You have 2 minutes to open
the rear lid. Once this time has passed, it
will lock again. In addition, the lamp on
the key flashes.
Folding the key shaft in and out
With the vehicle key the vehicle may be
locked or unlocked remotely

Operation
CAUTION
All of the vehicle keys contain electronic
components. Prot ect them fr
om damage,
impacts and humidity. Note