warning SEAT TOLEDO 2019 Owner's Guide
[x] Cancel search | Manufacturer: SEAT, Model Year: 2019, Model line: TOLEDO, Model: SEAT TOLEDO 2019Pages: 300, PDF Size: 6.88 MB
Page 156 of 300
Infotainment System
Infotainment System
Intr oduction
Saf et
y warnings
Infotainment system safety in-
structions Travelling on today
Page 204 of 300
Driving
With the help of this system, the ABS is activa-
t ed mor
e quickly and mor
e efficiently.
The brake assist function is deactivated auto-
matically when the brake pedal is released.
Hill hold control (HHC)*
The HHC system makes it easier to start the
vehicle on hills. The system maintains the
brake pressure created by pressing down on
the brake pedal for 2 seconds after it has
been released. Your foot can be removed
from the brake pedal and you can use the
accelerator pedal and move away on a hill
without having to use the handbrake. The
brake pressure drops as the accelerator ped-
al is pressed. If the vehicle cannot be started,
it will start to move backwards after 2 sec-
onds.
The HHC is activated on gradients of over 5%,
if the driver door is closed. It only works for
starting on hills, moving both forward and in
reverse. It is not activated during start-up
down hill.
Control lamp
If the control lamp ! flashes, the ESC is working.
If the ! warning lamp illuminates on ignition,
the ESC system may have switched off due to
technical reasons. Turn off the ignition and
turn it on again. Upon switching on the igni-
tion again, if the warning lamp has switched off, this means the ESC is functioning correct-
ly again.
If the !
warning lamp is illuminat
ed there is a
fault in the ESC.
The informative display indicates:
F a u l t : e l e c t r o n i c s t a b i l i t y c o n -
t r o l ( E S C )
or F a u l t : t r a c t i o n c o n t r o l s y s t e m
( A S R )
Go to a technical service. Note
If the battery is disconnected and connec-
ted again, the yell o
w warning lamp !
lights up when the ignition is switched on.
This warning lamp must switch off after
covering a short distance. Anti-lock brake system (ABS)
The ABS system prevents the wheels locking
during br
aking. This helps the driv
er k
eep
control of the vehicle.
The driver is made aware of ABS assistance
by the pulsating of the brake pedal and a
characteristic noise.
Keep the brake pedal pressed down while the
ABS is working. The ABS will switch off when the brake pedal is released. Never brake in-
termittently whil
e the ABS is working!
Control lamp
If the warning lamp is illuminated, there is a fault in the ABS.
The informative display indicates:
A B S f a u l t
The brake system alone is operational in the
vehicle, without ABS.
Go to a technical service. WARNING
Page 205 of 300
Start and driving
If the control lamp ! fl ashes, the ASR is w
ork -
ing.
If the ! warning lamp illuminates on ignition, the TCS system may have switched off due to
technical reasons. Turn off the ignition and
turn it on again. Upon switching on the igni-
tion again, if the warning lamp has switched
off, this means the TCS is functioning correct-
ly again.
If the ! warning lamp remains illuminated,
there is a fault in the TCS.
The informative display indicates:
F a u l t : t r a c t i o n c o n t r o l s y s t e m
( A S R )
Go to a technical service.
Electronic differential lock If one of the wheels starts to skid, the EDL
br
ak
es that wheel, tr
ansmitting the driving
force to the other wheels. This increases vehi-
cle stability and improves driving stability.
To prevent the disc brake of the braking
wheel from overheating, the EDL cuts out au-
tomatically if subjected to excessive loads.
The vehicle will continue to function normally
without EDL. The EDL will switch on again au-
tomatically when the brake has cooled down. Manual gearbox
Changing gears Fig. 215
Gear shift diagram of a 5- or 6-speed
manual gearbo x Read the additional information carefully
Page 206 of 300
Driving
engage the handbrake firmly and the move
the sel ect
or l
ever to the parking position. This
reduces the load on the lock mechanism
while making it easier to move the selector
lever from position P.
If, while the vehicle is moving, the selector lev-
er is accidentally moved to position N, re-
lease the accelerator and wait for the engine
to idle before moving it back into position. WARNING
Page 210 of 300
Driving
G e a r b o x : S y s t e m f a u l t ! Y o u m a y
c o n t i n u e d r i v i n g .
Hav e the f
ault corrected by a specialised
workshop without delay.
G e a r b o x : S y s t e m f a u l t ! Y o u c a n
c o n t i n u e d r i v i n g w i t h r e s t r i c -
t i o n s . R e v e r s e g e a r d i s a b l e d
Take the vehicle to a specialised workshop
and have the fault repaired without delay. G e a r b o x : S y s t e m f a u l t ! Y o u c a n
c o n t i n u e d r i v i n g i n D u n t i l
s w i t c h i n g o f f t h e e n g i n e
Stop the vehicle in a safe place well away
from moving traffic. Seek specialist assis-
tance. G e a r b o x : t o o h o t . A d a p t y o u r
d r i v i n g a c c o r d i n g l y
Continue driving at moderate speeds. When
the warning lamp switches off, you can con-
tinue driving in a normal manner. G e a r b o x : p r e s s t h e b r a k e a n d e n -
g a g e a g e a r a g a i n .
If the fault was caused by a gearbox with a
high temperature, this driver message will be
displayed when the gearbox has cooled
again. Gear-change indicator
Choosing the ideal gear Fig. 219
Instrument panel: gear-change indi-
cat or (manual gearbo x). A gear change will be recommended if the
gear you ar
e in is not the most economical
choice . If no gear
-change is recommended, it
means that you are already in the most eco-
nomical gear.
Vehicles with a manual gearbox
The following display symbols
Page 211 of 300
Start and driving
Steering Inf ormation r
el
ating to vehicle
steering Electro-mechanical power steering assists
the driver when st
eering.
El
ectro-mechanical power steering adapts
electronically to the speed of the car, torque
and turning angle.
If the power steering should fail at any time or
the engine is switched off (for instance when
being towed), the car can still be steered, as
long as the key remains in the ignition. How-
ever, more effort than normal will be required
to turn the steering wheel. WARNING
If the power steering does not work, you
will need much more str ength t
o turn the
wheel. This has a considerable effect on
vehicle safety.
Page 215 of 300
Start and driving
Engine management and
emission contr ol syst
em
Intr
oduction WARNING
Page 216 of 300
Driving
For the sake of the environment
Even when the emission control system is
working perf ectly, ther
e may be a smell of
sulphur from the exhaust gas under some
conditions. This depends on the sulphur
content of the fuel used. Quite often the
problem can be solved by changing to an-
other brand of fuel. Particulate filter
Applies to v
ehicl
es with diesel engine
The diesel engine particulate filter eliminates
most of the soot from the exhaust gas system.
Under normal driving conditions, the filter
cleans itself. The particulate filter is cleaned
automatically without need for indication by
the warning lamp . This may be noticed because the engine idle speed increases and
an odour may be detected.
If automatic filter purification cannot be car-
ried out (because only short trips are taken,
for example), soot will accumulate on the fil-
ter and the particulate filter warning lamp will
switch on.
Facilitate the automatic filter cleaning proc-
ess by driving in the following manner:
Page 217 of 300
Driver assistance systems
WARNING
Page 219 of 300
Driver assistance systems
S T A R T - S T O P A C T I V E
Automatic engine shut
down (Stop phase)
S W I T C H O F F I G N I -
T I O N S
witch the ignition off
S T A R T M A N U A L L Y Start the engine manual-
lyWARNING