automatic transmission SKODA FABIA 2004 1.G / 6Y MS402 Car Radio Manual

10
When storing RDS stations you should
press the corresponding station button
only when the station name appears in
the display. This ensures that all RDS
information has been interpreted and
stored automatically.
When calling up stored RDS stations,
the corresponding station name is display-
ed. If the stored frequency is too weak for
good reception, the radio searches auto-
matically for an appropriate alternative fre-
quency (best station function).
If non of the stored alternative frequencies
is strong enough for good reception, the
desired station cannot be received at the
moment. In this case, tune to another sta-
tion.
!Please make sure that the station
name is displayed when the station
is stored. If a moving text should be
displayed, this will be stored
instead of the station name.
In many European countries, RDS is al-
ready transmitted by many radio stations.
The goal is to provide an overall coverage.
With this system, an inaudible digitized
data current is transmitted in addition to
the normal FM radio signal, providing the
RDS receiver with information in encoded
form which controls, among other things,
the following functions:
• Programme identification (PI code)
With the help of the PI code, the radio
recognizes the currently received station.
• Programme service name (PS code)
The PS code transmits the station name
which is shown in the display.• Alternative frequencies (AF code)
Because of the limited transmission range
of the FM waves, the programme of one
radio provider is transmitted by several
stations on different frequencies. The AF
code informs the radio about all alternative
frequencies of the same programme.
This enables the radio to tune to the fre-
quency which can be received in the best
quality.
Tuning to another frequency is carried out
in an inaudible way.
The station name in the display remains
unchanged.
While you are driving, the RDS radio sear-
ches permanently for alternative frequen-
cies of the station selected and tunes to
this in an automatic and inaudible way.
• Traffic programme identification (TP code = Traffic programme)
This information tells the radio that it is
currently receiving a traffic programme
station.
Information about How does RDS work?
RDS stations
RADIO MODE

11
GB
7– TP button
The TP standby mode allows you to hear
only traffic announcements. Even if the
volume is set to minimum, the traffic an-
nouncements are heard with the program-
med volume – see also page 14. If the
transmission range of the traffic station
tuned to is left, the radio will start after
about 30 seconds an automatic station
search.
AS
TP
SCN
6A/FTP
Interrupting a traffic announcement
You may wish to interrupt a traffic an-
nouncement in certain situations, for
example
– if the announcement does not concernyour route,
– if the announcement is very long and the part concerning you is already comple-
ted.
While an announcement is heard , this
will be aborted and the previous mode, for
example radio reception or cassette play,
is continued. A new traffic announcement
will be heard again.
To switch definitely off all traffic an-
nouncements, deactivate the TP function.
You may store up to 24 stations on the 6
station buttons in connection with the res-
pective memory levels.
FM1/FM2 range = 6 stations each
AM1/AM2 range = 6 stations each
"FM2" means that you are in the second
memory level. Press the A/F button
5to
switch between the memory levels.
1123456123456
Traffic programme functions Station buttons
RADIO MODE
7

14
At tape end, the cassette side changes
automatically (Autoreverse)..
Cassette ejection
• Press and hold down the button ßW
during cassette play to eject the cassette
(motor ejection).
Cassette mode and traffic
radio programmes
When the TP function is activated during
cassette mode, cassette play is automati-
cally interrupted during a traffic announce-
ment so that this can be heard.
If the transmission range of the traffic sta-
tion tuned to is left, the radio will automati-
cally search a new traffic radio station.
Briefly press the TP button
7if you wish
to abort a traffic announcement and to
continue cassette play.
A new traffic announcement is heard
again.
CASSETTE MODE

21
Display
Frequency, station name, waveband,
station button, TP (traffic programme),
cassette functions.
Max. output power
4 x 20 Watt (max.),
4 x 17 Watt (to DIN at 4 Ohm).
Illumination
Anti-glare illumination of the control ele-
ments and the display when the vehicle
illumination is switched on (night design).
The brightness can be adjusted according
to the instrument board illumination.
Waveband selection
By touch buttons.
Cassette player
Wear-resisting high-performance sound
head, automatic tape type recognition,
rocker for fast forward and rewind and
switch-over to radio reception in the case
of traffic announcements, automatic chan-
ge of cassette side at tape end (autore-
verse).
Theft protection
Electronic security system locking the
radio when the power supply is discon-
nected. The radio can be put into opera-
tion again only by entering the correct
code number.
Reception ranges
FM, AM (MW).
Interference suppression
The automatic interference suppression
integrated in the radio eliminates most
interferences during FM reception.
Special intereference suppression circuits
eliminate most interfering impulses gene-
rated by the motor and other parts of the
electrical system, for example, ventilator,
windscreen wiper, etc.
Station selection
Automatic play of the last station tuned to
(last station memory) in radio mode.
Six station buttons each for AM1/AM2,
FM1/FM2. Direct manual tuning for RDS
stations. Manual tuning possible in the
direction of high or low frequencies. Micro-
computer-controlled stabilization of the
transmission frequencies (PLL quarz-
tuning).
Traffic radio programme functions
Automatic station search, automatic traffic
announcements, switch-over to mono
during traffic announcements.
Audio functions
Stereo, active tone control, sound balance
control integrated in the radio, multiple
loudspeaker system.
BRIEF TECHNICAL DESCRIPTION
The indications in this user manual com-
ply with the information available at the
day of printing.
Subject to technical modifications.
This paper has been made of chlorine-
free and bleached pulp.