turn signal SKODA FABIA 2006 2.G / 5J Dance Car Radio Manual

AF
AF ON
AF OFF A network of transmitters is used to cover a
broader area. Your radio automatically tunes to
a stronger transmitter, based on received
information about alternative frequencies.
If this function is activated, the tuner
automatically tunes to a stronger transmitter.
If this function is deactivated, the tuner stays
tuned to a set frequency.
Move to Special functions setting (see
chapter Special functions).
The displayed data disappear after 10 seconds
of inactivity. The selected values remain stored.

Radiotext
Some stations transmit additional text
information, called Radiotext. Press
button to review the radiotext information.
This text information may not be available at all
stations, even if a particular station transmits
RDS data. Depending on the quality of received
signal, the radio may need some time to
receive all characters correctly before dis-
playing them.
If the selected station does not transmit
radiotext, or the text is still being read, the
“ ” message appears.INFO
TEXT UNAVAILABLE10SCAN function
SCAN
OK
CANCEL Press button to activate an automatic
search for all stations in the selected band.
Press button or to switch to other
stations. 10 second sample of each station is
played, and then the radio tunes to the next
station. Press button to end automatic
scanning. The last station found is played.
Press button to return to the
station which was playing before activating the
SCAN feature.


5
12
12
12
7
Operation of the Radio
GB

Your radio offers connection of a broad variety
of audio devices from pocket players to laptops,
or TV receivers. This input must be enabled in
the settings menu of your radio – see chapter
Special functions.
he external input mode to “ ” Playback
will start automatically after the source is
connected.
By pressing the
preset button repeatedly display the
screen for setting the input sensitivity in
dependence on the output level of the external
source signal.
High level, used mainly for signal
sources such as laptops.
Medium level, used for devices such
as cassette players or CD players
Low level, used for players such as
MP3.
Press the preset button to set the required
sensitivity. The indicator will show the set value. External audio source activation button:
By pressing the button repeatedly select
t
CD
AUX IN...
Input sensitivity setting:
AUX LEV 1
AUX LEV 2
.
AUX LEV 3
 2
12
12
BACK
BACK
Note By pressing preset button you return
to previous menu level.
: Your radio has no regulation of the
output level set at the external device. Please
remember that the highest playback quality
can be reached by setting a proper
combination of input sensitivity (see above)
and output level of the external signal source
usually by means of volume regulators. You
can find more information about settings
especially in the instruction manuals of such
devices.
Try to set the highest possible output level of
the connected device. Lower this level in case
of experiencing sound degradation or
distortion. This degradation does not mean a
failure of your device and may be prevented by
proper setting.
The quality of the reproduced signal depends
also on the recording.12
14
Stopping playback
FM AM To stop AUX playback and to switch on the
radio, press button or . The last
selected station will play.
Press button to return to the CD playback
mode.
CD
39
2
Connection of external audio sources*
Input activation

FADER
Third level of AUDIO settings
GALA
GALA
PDC VOL*
PDC VOL Setting the balance between the front and the
rear speakers.
Passage to the next level of settings.
Your radio automatically increases the volume
with increasing drive speed so that perceived
volume does not change. The rate of increase
can be set by pressing preset button
and turning of button . Higher numbers mean
sharper increase. When 0 is set, the volume
does not change.
Sometimes, excess volume can distract you
when parking your car. If your car is fitted with
“parking aid” device, the radio will lower the
volume to preset level when the “parking aid”
unit is active. Press preset button
and turn button to set the volume level, to
which the volume will be reduced auto-
matically during parking.

12
1
12
1 MONO OFF
MONO ON
Second level of AUDIO settings
AUDIO
BALANCE The stereo decoder is activated whenever the
input signal is strong enough.
Under certain circumstances, stereo sound is
interrupted and in low- quality, even if the
input signal is strong. This occurs for example
when driving in urban areas. You can turn off
the stereo decoder and listen to mono sound
with increased quality.
Passage to the next level of settings.
By pushing the button and passing to the
second level of settings by the preset
button these settings are available:
Setting the balance between the right and the
left speakers.


8
15
AUDIO settings
User Settings
Setting tone
TREBLE
MIDTONE
BASS
Additional audio parameters
LOUD
LOUDNESS
LOUD ON
OFF
MONO Press button and user preset button to
select a parameter; an indicator will mark the
parameter and you can then set the value by
turning button .
treble setting
mid setting
bass setting
At lower volume, function boosts
the bass and treble. Pressing preset button
and selecting activates this function.
Selecting deactivates it.
The stereo decoder is activated whenever the
input signal is strong enough. The decoder is
switched off when the tuner receives weak
signal.812
1
12
GB

Discs, when not used, should be returned to
the box. Always hold the disc by the edges or by
an edge and the centre hole, and never touch
the active surface. Fingerprints or scratches
reduce sound quality and may render the disc
unreadable.
CDs exposed to direct sunlight or extreme
temperatures can warp and lock in the player.
Legislation differs from country to country.
When recording from copyrighted media,
check for applicable local legislation.
Your radio provides you with quality sound
under normal conditions. The following text
will help you to maximize your listening
pleasure with ever increasing number of
available stations
In most cases, LW and MW signals are
unaffected by tall buildings or natural
obstacles. Some interference can be caused by Signal spread
LW/MW reception (AM) MP3 discs can hold many more songs than
ordinary CD- DA discs, because of high
compression ratio. Your radio can play files
with 8 to 320 kbps bit rate and 8 to 48 kHz
sampling, as long as each session is properly
finalized; the disc needs not be finalized.high voltage lines, bridges or lighting storms.
These disturbances are only temporary.
FM transmitters offer higher signal quality than
LW or MW transmitters. Moreover, stereo Hi- Fi
signal is transmitted.
FM transmitters are usually located at elevated
locations, e.g. tall buildings, hills, or in the
mountains. There is a reason for this - FM
signals are affected by “line of sight” issues and
their coverage is inherently limited. Usually, the
higher and more powerful the transmitter, the
bigger area is covered. Some local transmitters
or repeaters are low powered and can only be
tuned to within a few kilometers' area. More
powerful transmitters (usually operated by
networked stations) can be received at a
distance of up to 100 km. Anyway, when
exceeding a particular distance from the
transmitter, you have to tune your radio to
alternative frequency. When listening to
stations with weak signal, nearby stronger
stations can interfere with the reception. Such
interference usually occurs as you are nearing
the limit of the area covered by the particular
transmitter you are tuned to. FM reception
Distance from transmitter
18
Signal echoes (multipath reception
Signal losses
Warranty)
FM signals reflect off buildings, hills and other
objects and these echoes may interfere with
direct signals. This may happen to any signal,
either strong or weak. Multipath reception
impair the signal, which causes minor audible
faults or even strongly disturbed signal.
FM signals behave like light and cannot
penetrate through buildings, hills, obstacles
etc. Thus places may appear with no signal
coverage, which causes a “crackly” sound
when going through these areas
This car radio is backed up by the same
warranty as a new car. Warranty is void in case
of improper handling, operation, or
unauthorized repair. Warranty is void in case of
exterior damage.
Cautions and Instructions
Useful tips Warranty