turn signal SKODA FABIA 2007 1.G / 6Y DX Navigation System Manual

TV Tuner *
56
TV Tuner *
Introduction
If the vehicle is stationary you have the possibility with the TV Tuner to
receive television programs. The TV picture appears on the screen of the
navigation unit. The sound reproduction is performed via the vehicle
loudspeakers.
TV mode
– Press the button . The menu for select source
appears ⇒ fig. 47. – If you are in the navigation mode, the button must
be pressed twice.
– Select and confirm the menu field “ TV/VIDEO”.
The last selected TV station appears on the screen and the logo “ AUX”
appears in the display of the combi instrument.
Note
•When driving, the TV picture turns dark, the TV sound can still be
heard.
•The message “ For your own personal safety the TV picture will not
be shown ” is indicated.
•If the quality of the TV signal is not sufficient (e.g. in valleys, by atmos-
pheric influences etc...) this can lead to a poor TV reception.
•If you wish to switch off the TV mode, press the button and
select the desired audio source.
•If you wish to indicate the program info (e.g. channel etc...) press the
button .
Station finding
You have two possibilities to set a channel.
1st possibility:
– Press the button for station finding right (or left) - it sets
the next (or the previous ) channel.
Fig. 47 Select source -
TV mode
AUDIOA15
AUDIOA15
AUDIO
A9
A2
20.book Page 56 Tuesday, December 6, 2005 2:26 PM

TV Tuner *57
2nd possibility:
– Turn the menu knob to the right (or left), in order to set the
next (or the previous ) channel.
For information the station and the belonging channel is indicated.
Store station
The six TV stations can be stored on the station buttons -
.
– Set the desired station with the button or the menu knob .
– If the desired station has to be displayed, the desired station button - must be pressed until there is a brief muting and
a signal tone cancels the storing.
You only have to touch the corresponding station button to call up the
stored station . The TV station belonging to it appears as long as it is in
its reception range.
Call up operator menu
TV operator menu:
•SCREEN - calls up a sub-menu, in which the brightness, contrast and
colour can be set.
•TELETEXT - here the video text pages can be called up.
•VIDEOSOURCE - switches from TV mode to video and vice versa.
•SETTINGS - calls up a sub-menu, in which the TV standard (video) is
selected.
Set screen
– Confirm the menu point “ SCREEN” in the operator menu by
pressing the menu knob . Following settings are possible:
Brightness, contrast, colour.
– To change to the setting mode press again the menu knob . Instead of the previous symbol appears an arrow
, the entry
is highlighted in colour.
– Select the desired value.
– Press the button , in order to take over the setting and to exit the menu.
Select Autosearch
If the Autosearch function is activated, the TV tuner always tries
to establish the best frequency of the selected TV station.
– Press the menu knob . The operator menu is indicated in the TV picture.
– Select and confirm the menu point “ SETTINGS”.
– Select the menu point “ AutoSearch” and press the menu
knob . The AutoSearch function is switched on (or switched
off).
A18
16
A12
A2
A18
16
A18
A18
A9
A18
A18
20.book Page 57 Tuesday, December 6, 2005 2:26 PM