vDo not polish the paintwork in a dusty environment - risk of paint scratch-
es.
v Do not apply any paint care products to door seals or window guides.v
Plastic parts
v Do not use paint care products.
v
Chromed and anodised parts
v Do not polish the chrome parts in a dusty environment - risk of surface
scratches.
v
Foils
The following instructions must be observed, otherwise there is a risk of foil
damage.
v Do not clean with dirty cloths or sponges.
v To remove ice and snow, do not use a scraper or other means.
v Do not polish the foils
v Do not use a pressure washer to clean the foils
v
Rubber seals
v Do not treat the door seals and window guides with any products - the pro-
tective lacquer layer could be affected.
v
Windows and external mirror glass
v Do not clean the inside of the windows with sharp objects - there is a risk
of damage to the filaments or glass antenna.
v Do not use a cloth, which was used to polish the body - this could soil the
window and reduce visibility.
v
Headlights/lights
v Do not dry off the headlights/lights, do not use sharp objects - there is a
risk of damage to the protective coating and subsequent cracking of the
headlight glass.
v
Reversing camera
The following instructions must be observed, otherwise there is a risk of
camera damage.
v Do not remove snow / ice with warm / hot water.
v To wash, never use a pressure washer or steam jet.
v For cleaning, do not use abrasive cleaners.
v
Door lock cylinder
v Make sure that as little water as possible gets into the locking cylinder
when washing the vehicle - there is a risk of freezing the lock cylinder!
v
Wheels v Heavy contamination of the wheels can affect the balance of the wheels -
this can result in vibrations and, under some circumstances, can cause pre-
mature wear of the steering wheel.
Removing snow and ice from the windscreensFig. 296
Installation location of the ice
scraper, removing the scraper
WARNING (Continued)vTo protect against coolant splashes, cover the cap with a cloth when
opening.v
Coolant and coolant fumes are harmful - avoid contact with the coolant.
If your eyes or skin come into contact with the coolant, immediately wash
the affected area for a few minutes long with a lot of water and seek medi-
cal advice if required.
CAUTION
Do not cover the radiator or fit any parts (e.g. auxiliary lights) in front of the air
intakes - there is a risk of the engine overheating.
Checking and refilling
Fig. 305
Coolant expansion reservoir
