CD changer SKODA OCTAVIA 2007 1.G / (1U) Audience Car Radio Manual

The device complies with the protective
requirements of EMV (Directive EG 89/336 EWG
and Directive 93/68 EWG) according toEN
55013 and EN 55020 standards.
Brief Introduction2
Important Precautions 3
Operation of the Radio 4
Operation of the Built- In
CD changer 10
User Settings 14
Cautions and Instructions,
Warranty 17
Brief Technical Description 19
Operating Instructions
1
Dear Customer,
If you have not received a security code for
your radio, it means that your car is fitted with
comfort coding system, which does not
require a code. In case of disconnection and
reconnection of car battery, first switch on
the power by the starting key, then switch on
the radio. If you need a code, contact your
Škoda service
E
D
F
GB I
S
PL
CZ

Section............................................................. page................................................................. 4
- radio on/off (by pressing)
- volume control (by turning)
- other setting functions in various menus
........................................................10
- CD- DA/CD- R/RW/MP3 disc playback activation
- select a disc using the preset button 12
............................................... 4,11,12
- FM radio activation
............................................................5
- stores 6 most powerful stations into presets in each band
........................................7,8,11,12
- fast search through the selected radio band
- search through the CD
...............................................4,11
- tuner mode: manual tuning
- CD mode: selects a track
...............................................4,11
- fast station search: SEEK
- fast forward/rewind F.FWD / F.RWD within a track
1.Button
2.CD button
3.FM button
4. AS button
5. SCAN button
6. Buttons
7. Buttons



Section ............................................................page ..................... 14
- activates the sound setting menu
- activation of menu for sound balance
...............................................4,11,12
- MW/LW radio activation
............................................. 7,12
- tuner mode: displays Radio Text information
- displays additional information from MP3 discs
..................................... 6,13,15
- activates a menu for radio or CD parameters setting
......................................... 5,11
- tuner mode: recalls stored presets
- tuner mode: stores presets
- selects a CD to be played from the built- in changer
- selects user setting parameter section 8. Sound settings button AUDIO
9.AM button
10. INFO button
11. MENU button
12. Preset buttons Section ............................................................page
................................................11
- ejects the disc from the built- in changer
............................................................ 10
- up to 6 CD- DA/CD- R/RW/MP3 discs can be inserted
- displays operating information
- displays the meaning of preset buttons in various modes
......................................................... 9
- activates the traffic message mode (TP, EON)
- activates automatic switching to traffic messages
- initiates the search for transmitters with traffic information
................................................ 10
- initiates the disc insertion mode
...................................................... 9
- replays stored traffic messages
- initiates the recording of traffic messages 13. EJECT button
14. Slot for loading discs into the built- in changer
15. Display
16.TP button
17. LOAD button
18. AIM button
2
Brief introduction

Disc loading slot
Important notice!
Activation of CD playback modeCD
NO CD Activation of
CD disc loading mode LOAD Your radio is fitted with a built- in changer for 6
CD- DA, CD- R, CD- RW discs containing MP3
or audio files.
The CD drive used in this radio is operated in a
completely different fashion than common CD
car stereos. Do not attempt to load a disc
unless instructed to do so on the display. First,
read the instructions describing proper loading
of a CD. The radio or the disc can be damaged
when these instructions are not followed.
While
listening to the radio, press button . If no
CD is inserted, you will be notified of the fact by message. In this case, follow the
instructions given in the chapter . If a CD has been
inserted, playback starts from the point where
it has been interrupted the last time. 2
Display indications in the CD mode
REPEATMIX
A Current track number
B Play time indication
C Area reserved for preset buttons . Press
a button to select a disc to be played.
D Currently played disc indication
E Icon - mode active See chapter Optional functions in the CD mode
F Icon - mode active See chapter Optional functions in the CD mode 12
Activation of CD disc loading mode LOAD
LOA D
„SELECT CD TO INSERT”
NO CDPLEASE
WAIT” “INSERT CD”
Tip: LOAD LOAD ALL
Follow the instructions when loading discs:
1. Press button
2. After message
appears, press preset button beside the
empty position labelled .
3. The drive prepares for insertion of a CD;
please wait (the display shows“ message).
4. When message appears, insert the disc with printed side up.
Press and hold button
To fill the changer. (You can insert up to 6 CDs in
sequence.) After message appears,
release the button and you will be prompted to
insert all discs in sequence.
After the last inserted CD is recognized and
read, playback begins. 17
12
17
Operation of the Built- In CD changer
Listening to a CD
10
A
DF BC
EC

Ejecting the discEJECT
SELECT CD TO EJECT
PLEASE WAIT REMOVE CDINSERT CD
LOA D
Tip EJECT
EJECT
ALL When replacing or ejecting the disc, observe
the instructions in this manual and on the radio
display:
1. Press button .
2. After “ ” message ap- pears, press preset button corres-
ponding to the disk you want to eject.
3. “ ” message appears and the drive prepares for ejection of selected disc.
4. Disc is being ejected and “ ” message appears. You can remove the disc.
5. After removing the disc, “ ” message appears and you can insert
another disc without having to press the
button
: Press and hold button to eject all
discs from the changer. After message appears, release the button.
If you do not remove ejected disc from the unit,
it will be drawn back to the unit automatically
for safety reasons. If no CD is inserted in the
changer, the unit switches to radio mode
automatically after 10s. 13
12
17 13
Operation of the Built- In CD changer
SCAN functionSCAN
OK
Stopping playback FM AM
Press button to start searching through
the disc. A 10- second sample of the beginning
of each track is played. The sequence number
of the track on the disc is displayed at the same
time.
Press preset button to end the scan
mode. Current track will be played normally.
To stop disc playback and to switch on the
radio, press button or .
The last selectedstation will play. 5
3912
Selection of discs and tracks
CD1-
CD6 NO CD
Track select buttons
Seek buttons In CD playback mode, you can select a disc by
pressing a preset button labelled . Empty positions are labelled .
During CD playback, press button to skip
to previous track.
Press button to skip to next track. Playback
starts from the beginning of selected track.
Press and hold button or for fast rewind
or fast forward within a track of the CD. Normal
playback resumes after you release the button.




12
6
6
7
11
GB

Display indications in the CD - MP3 mode
A Number of currently played disc
B Number of currently played folder
C Area reserved for preset buttonswith the following symbols:
Previous/next folder
FILE Selection of information display for the playing track in the field F
D Number of currently played track
E Elapsed track time
F Track information. By pressing the preset you can select between
FILE / FOLDER / TITLE / ARTIST /
ALBUM. If this information has not
been entered upon disc creation,
„ “ appears on the
display.UNAVAILABLE 12
12 SCAN function
SCAN
OK
Disc Selection CD
Stopping playback FM AM
Press button to activate searching
through the disc. A 10- second sample of the
beginning of each track is played. The
sequence number of the track on the disc is
displayed at the same time. After 10s, the
beginning of next track is played. You can select
folders to be searched through by pressing the
corresponding preset buttons .
Press preset button to end the scan
mode. Current track will be played normally.
If you want to play another inserted disc, press
button for the disc selection screen to
appear.
You can select the desired disc by pressing the
appropriate preset button .
To stop disc playback and to switch on the
radio, press button or .
The last selectedstation will play. 5
2 12
12
12
39
12
INFO function INFO
MP3 INFO
Displaying additional information ID3 INFO
Press button to display information
about currently played track and about the
folder. The radio will display track
and folder names in the format in which they
are stored on the MP3 CD.
Individual MP3 files are organized in a
hierarchy commonly used on personal
computers. Due to high number of tracks,
which can besaved to a disc, we recommend
use of folders to organize tracks.
Press preset buttons to display
additional information about currently
played track (ID3 tags). 10
12
Playback of MP3 files
Operation of the Built- In CD changer
AD
F B
C
E
C

Optional functions in the CD modeMENU
MIX MIX
OFF
TRACK
FOLDER
MIX Press button in the CD playback
mode to display the following picture.
Playback in random order.
Press preset button to set required
parameter:
playback in normal order
playback in random order within aselected folder
if a MP3 disc is inserted, tracks are selected for playback randomly
from randomly selected folders.
appears on the display when random
playback is active.
The display clears after 10s of inactivity. 11
12 PLAY
PLAY
CD
MP3
REPEAT
REPEAT
OFF
TRACK
FOLDER You can select whether CD or MP3 tracks
should be played when a disc with both data
types (CD- DA, MP3) is inserted. Select, which
part of the CD will be played.
Press preset button to select: playback of standard audio data (CDDA format)
playback of MP3 files
This selection is only possible for multisession
discs.
Select repeat mode. Press preset button to select:
playback in normal order
repeated playback of current track
if a MP3 disc is inserted, tracks (files)located in the folder, which was
active when the function was
activated, will be played repeatedly. 12
12When mode is active, top line of the
display shows .
Plays next CD in the built- in changer. After the
disc playback ends, the changer can play the
disc again, or select other discs (if at least one
other disc is inserted).
Press preset button
to select:
automatic selection of next disc to be
played
disc will be played again
By pushing the preset button you will
move to the second level, see chapter Special
features. REPEAT
RPT
NEXT CD
NEXT CD
AUTO
MAN

12
12
13
Operation of CD
Operation of the Built- In CD changer
GB

19
Output power
Tuner
Display
User interface 4 x 20 W at 14.4 V; 25°C; 10% THD,
4 x 35 W peak power
Digital audio processor with equalization set
according to car type
LOUDNESS function
FM, AM (MW, LW) bands
18 FM presets, of which 6 for Autostore
function
18 AM presets, of which 6 for Autostore
function
Automatic/manual tuning
Variable bandwidth
Automatic storage
Automatic switching MONO/STEREO
SCAN function
Positive FSTN
Graphic display, 200 x 47 pixels
Green backlight
Volume knob, push to turn on/off
Independent volume setting and balance for
phone
Green backlight of buttons
Access to user settingsRDS
Built- in CD changer Station name (PS) display
Optional automatic tuning to alternative
frequency (AF)
Optional preference of local stations
Regional traffic messages
Traffic messages in the EON network
Search by program type (PTY)
Receipt of PTY31 (alarm)
Traffic program (TP)
Station names are stored to presets
Independent volume setting for traffic
messages
Update of preset in the EON network
Recording of traffic messages
Capacity: 6 CD- DA, CD- R, CD- RW,
Multisession, MP3 discs
Playback of copy- protected discs
Track repeat
Random playback within a disc
Tracks SCAN
ESP memory, 3 s minimum
Skip to next/previous track
FF/REW seek within a track (not for MP3) Car integration
Comfort coding
Diagnostics
Optional control from multi- function
steering wheel (if the car is fitted with one)
Optional use of external display
Automatic volume change according to
driving speed
Auxiliary audio inputs
Phone interface for automatic mute,
loudspeaker output
External amplifier
Parking aid” unit connection
Display of instructions provided by the
CLIMATRONIC unit
Brief Technical Description
GB