trip computer SKODA OCTAVIA 2007 1.G / (1U) Owner's Manual

Instruments and Indicator/Warning Lights
14
Digital clock
A clock-set button is installed on the bottom left beside the speedom-
eter for adjusting the clock ⇒page 10, fig. 2 .
Set hours
– Turn the reset button to the left.
Setting minutes
– Turn the reset button to the right.
WARNING
The clock should not be adjusted while driving for safety reasons but only
when the vehicle is stationary!
Multi-functional indica tor (onboard computer)*
Introduction
The multi-functional indicator appears in the display ⇒fig. 5 or in the information
display ⇒page 18, fig. 10 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information.
Note
In certain national versions the displays appear in the Imperial system of
measures.
Memory
The multi-functional indicator is equi pped with two automatic memories. The
selected memory is displayed in the middle of the display field ⇒fig. 5 .
The data of the single-trip memory (memory 1) is shown if a 1 appears in the
display. A 2 shown in the display means that da ta relates to the total distance
memory (memory 2).
Switching of the memory takes place when the button ⇒page 15, fig. 6 .
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the igni-
tion is switched on until it is switched of f. New data will also flow into the calcula-
tion of the current driving information if the trip is continued within 2 hours after
The outside temperature⇒page 16
Current fuel consumption⇒page 16
Average fuel consumption⇒page 16
Range⇒page 16
Distance driven⇒page 16
A6
Average speed⇒page 17
Driving time⇒page 17
Warning against excessive speeds*⇒page 17
Fig. 5 Multi-functional
indicator
AB
NKO A5 20 MR08.book Page 14 Wednesday, April 11, 2007 2:54 PM