reset SKODA OCTAVIA 2007 1.G / (1U) Stream Car Radio Manual

Section............................................................. page................................................................. 4
- radio on/off (by pressing)
- volume control (by turning)
- other setting functions in various menus
.....................................................9,11
- CD- DA/CD- R/RW disc playback activation
- select a disc using the preset button 12
.................................................... 4,10
- FM radio activation
............................................................5
- stores 6 most powerful stations into presets in each band
.............................................7,8,10
- fast search through the selected radio band
- search through the CD
...............................................5,10
- tuner mode: manual tuning
- CD mode: selects a track 1.Button
2.CD button
3.FM button
4. AS button
5. SCAN button
6. Buttons


Section ............................................................page
...............................................5,10
- fast station search: SEEK
- fast forward/rewind F.FWD / F.RWD within a track
..................... 12
- activates the sound setting menu
- activation of menu for sound balance
....................................................4,10
- MW/LW radio activation
.................................................. 7
- tuner mode: displays Radio Text information
..................................... 6,10,11
- activates a menu for radio or CD parameters setting
......................................... 5,11
- tuner mode: recalls stored presets
- tuner mode: stores presets
- selects user setting parameter section 7. Buttons
8. Sound settings button AUDIO
9.AM button
10. INFO button
11. MENU button
12. Preset buttons

Section ............................................................page
................................................10
- ejects the disc from the built- in changer
.............................. 9
- allows loading and subsequent playback of CD- DA/CD- R/RW discs
- displays operating information
- displays the meaning of preset buttons in various modes
......................................................... 8
- activates the traffic message mode (TP, EON)
- activates automatic switching to traffic messages
- initiates the search for transmitters with traffic information
13. EJECT button
14. Slot for loading CD discs.
15. Display
16.TP button
2
Brief introduction

Switching the radio on/off
Switch the radio on or off by pressing button .
If you switch the radio off by switching off the
ignition, the radio will be switched on
automatically when the ignition is switched on
again
If the radio is switched on by pressing button
when the ignition is switched off, the radio will
remain switched on for 60 minutes.
After switching the radio on, e.g. to the tuner
(FM) mode, a display similar to the following
picture will appear:1
1 Selection of a band and of a memory level
FM
FM1- FM2- FMAS AM
AM1- AM2- AMAS
The radio has FM and AM bands. These are
divided into 6 memory layers, 3 for the FM
band and 3 for the AM band. Each memory
layer has 6 presets.
Push of the button activates the FM wave
band. Second push switches among memory
levels .
Push of the button activates the AM wave
band. Second push switches among memory
levels .
The display indicates the currently selected
wave band.
3
9
A Current station (name or frequency).
B Names or frequencies of reset stations.
C A pointer showing which station or
frequency are currently tuned.
D Indicator - traffic messages active.
E Current time.
F Current exterior temperature.
G Indication of the selected wave band
You can set the volume by turning button .
The display always shows the current volume
setting. Volume control 1
Switching the radio on/off Switching the Bands
4
Operation of the Radio
AB
D
F
B C
EG

Manual tuning
Automatic tuning - SEEK You can set the frequency of a requested
station by pressing button or . The
frequency keeps changing when you keep
button or pressed. Release the button
to stop tuning. The display will show the set
frequency.
You can skip to the next available station in the
currently selected band by pressing buttonor The tuner will automatically stop
when the next station is found in the desired
direction.




6
7
6
Storing the stations to presets
Recalling the presets
Automatic tuning and storing of stations
AS
STORING
Use buttons or to tune the station you want
to store. Press and hold (for approx. 2s)
selected preset button to memorise the
station. (The sound volume is lowered
temporarily and a beep sounds; then the
station is stored.) You can use6x6pr
esets.
Having stored the stations using the preset
buttons , you can press any of the buttons
briefly to recall the respective station.
The automatic tuning and storage system seeks
all stations within a selected band, selects 6
stations with the strongest signal, and stores
them as presets. Press (AutoStore) button
to start the process. The display shows a
message and the sound is muted
(see picture). 67
12
4
12
12If you select the band, memory
layer will include 6 stations with the strongest
signal in the FM band. As soon as the process is
complete, the FM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
If you select the band, memory
layer will include 6 stations with the strongest
signal in the AM band. As soon as the process is
complete, the AM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
Each use of the function updates and
rewrites the presets in the currently selected
band (FM- AS or AM- AS). FM FM- AS
1
AM AM- AS 1
AS
12
12
Tuning and Storing the Stations
5
Operation of the Radio
GB

LEARN ON
LEARN
LEARN OFF
LEARN
REGIONAL
REGIONAL ON The tuner continuously tunes, updates and
sorts all available signals, thus updating thememory, for the area where you are
currently driving. This process causes very
short dropouts; and this is not a malfunction.
Under certain circumstances, operation of the
function can be annoying. You can
switch off the function, and the tuner then has
to check any frequency that you want it to tune
to.
Some stations offer nationwide programming
and also local programmes with modified
content.
You can listen to local content to get
information about local traffic situation and
local events.
If this function is active, the tuner will not switch
to an alternative frequency of a nationwide
station whenever a regional programme has
been tuned; even if the alternative frequency
has stronger signal. REGIONAL OFF
SEEK
SEEK LOCAL
SEEK
SEEK DX
SEEK The tuner will tune to alternative frequencies
with stronger signals, regardless of local
content. The received programme can change.
Tuning sensitivity.
stops at local stations with stronger
signal.
stops at all available stations.
Press one of the preset buttons to select. 12
RDS system
Station Name display (PS)
Alternative Frequency network (AF)
Tuner parameters setting
MODE
LEARN Your radio includes a RDS (Radio Data System)
decoder, which receives additional data
transmitted by the majority of FM transmitters.
Your radio displays the names of the stations it
is tuned to.
Nationwide stations use a network of
transmitters operating on different frequencies
to cover the whole country without
interference between transmitters.
Press button to display the tuner
menu. Use preset buttons to select and to
change the options.
Your radio offers a function which reduces drop
outs, allows for better reception and faster
tuning. The radio creates a list of available
signals sorted by program identifier (PI) and
signal strength. This allows the radio to tune to
other frequency with the same program, using
a list of alternative frequencies used by
nationwide stations. 11
12
6
Operation of the Radio
RDS System

NONEunspecified
NEWS news
AFFAIRS current affairs
INFO information
SPORT sport broadcasts
EDUCATE education
DRAMA drama
CULTURE culture
SCIENCE science
VARIED various music
POP popular music
ROCK rock music
EASY easy listening
LIGHT light music
CLASSICS classical music
OTHER other genres
WEATHER weather forecast
FINANCE financial programmes
CHILDREN children programmes
SOCIAL social programmes
RELIGION religious programme
PHONE IN phone in programmes
TRAVEL travel programmes
LEISURE leisure
JAZZ jazz music
COUNTRY country music
NATION national music
OLDIES oldies music
FOLK folk music
DOCUMENT Documentaries
Program type ALARM is used for nationwide or
local emergency broadcasts. Use of Programme Type (PTY) selection
SCAN
PTY
OK
NONE OK
CANCEL
OK
CANCEL
Press button and use preset button
to select . Turn button to select the
desired programme type on the display.
Confirm your selection by pressing the preset
button . Press one of the preset buttons
or to activate the search for the
requested programme type. During the search,
the sound is muted.
If you select , the tuner stops at each
station found.The display remains active until
you press either preset button or preset
button . You can change the
programme type selection while the search is
active. Press preset button to end the
search and to listen to a newly found station, or
press preset button to return back
to the original station
If no station with the desired programme type
is found, the tuner returns to the original
station.
Programme type selection is not available in
MW and LW bands.


51 2
1
12
12
12
12
12 Some stations transmit traffic messages,
describing the current traffic situation, besides
standard RDS data. This information is
displayed when button is pressed. If the
radio is tuned to a station which does not
transmit traffic information, it will search for
one, displaying .
If no station transmitting traffic information is
found, is displayed. The radio stays
tuned to the original station.
Incoming traffic messages automatically
interrupt the sound of a CD or other station
broadcasts. is displayed.
RDS- EON (Enhanced Other
Networks) links certain stations so that the
traffic information transmitted by one station
can be received while another station is tuned
in. If any problems prevent the traffic
information from being received, the sound
will be muted and the message is
displayed. TP
TP SEEK
NO INFO
TRAFFIC
Trafic information within the RDS- EON
network
NO INFO
16
Operation of the Radio
Programme Type (PTY)
Traffic Information
8

Traffic information endTP
TP
Recording trafic information After the traffic information ends, the sound of
the original station, or of a CD, will be Restored.
You can press button at any time to
cancel the playback of traffic information. The symbol will disappear.
Your radio has a special memory which allows
the recording of traffic information for
subsequent replay. Recording is only possible
in the FM band. Recording works even when
you are listening to a CD. 16
Disc loading slot
Activation of CD playback mode CD
NO CD
Your radio is fitted with a built- in CD player. To
Listen to a CD, insert the disc into the slot
with printed side up. Disc contents will be read
and playback begins.
While listening to the radio, press button .
If a CD has been inserted, playback starts from
the point where it has been interrupted the last
time. If no CD is inserted, you will be notified of
the fact by message.
14
2 Display indications in the CD mode
REPEATMIX
A Current track number
B Play time indication
C Area reserved for preset buttons .
Previous/next track.
Fast forward / rewind within a track.
D Icon - mode active See chapter Optional functions in the CD mode
E Icon - mode active See chapter Optional functions in the CD mode



12
9
Operating of CD player
Replaying CD
A
D B
EC C
GB

SCAN functionSCAN
OK
Stopping playback FM AM
Track select buttons Press button to start searching through
the disc. A 10- second sample of the beginning
of each track is played. The sequence number
of the track on the disc is displayed at the same
time.
Press preset button to end the scan
mode. Current track will be played normally.
To stop disc playback and to switch on the
radio, press button or .
The last selectedstation will play.
During CD playback, press button to skip
to previous track.
Press button to skip to next track. Playback
starts from the beginning of selected track.



5
12
39 6
6 Seek buttons
Disc ejection button (EJECT)
EJECT
NO CD Press and hold button or for fast rewind
or fast forward within a track of the CD. Normal
playback resumes after you release the button.
Press button to eject the disc. If disc is
currently being played, playback stops and
radio is switched on. If no disc is in the drive, is displayed.
If you do not remove ejected disc from the unit,
it will be drawn back to the unit automatically
for safety reasons.7
13 MENU setting button
MENU
MIX MIX
OFF
TRACK
MIX
REPEAT
REPEAT
OFF
TRACK REPEAT RPT
Press button
in the CD playback
mode to display the following picture:
Playback in random order.
Press preset button to set required
parameter:
playback in normal order
playback in random order
appears on the display when random
playback is active.
Select repeat mode. Press preset button
to select:
playback in normal order
repeated playback of current track
When mode is active, top line of the
display shows .
By pushing the preset button you will
move to the second level, see chapter Special
features.

11
12
12
12
Operating of CD player
Optional functions in the CD mode
10

MENU setting buttonMENU
MIX MIX
OFF
TRACK
MIX Press button in the CD playback
mode to display the following picture:
Playback in random order.
Press preset button to set required
parameter:
playback in normal order
playback in random order
appears on the display when random
playback is active.
By pushing the preset button you will
move to the second level, see chapter Special
features.

11
12
12
Operating of external CD changer*
Playback of discs Optional functions
Display in the external CD changer mode
MIX
A Current track number
B Elapsed play time indication
C Area reserved for preset buttons 12; press
a button to select the disc to be played
back
D Currently played disc indication
E Icon - mode active; See chapter Optional functions in the CD mode
Your radio offers comfortable control of
original originálního CD changer, if your car is
fitted with one (optional extra). The operation
of the changer is described in a separate
instruction manual.
Press button while operating the builtin
CD player to operate external CD changer, if
your car is fitted with one. Press the button
again to play a CD in the built- in player. If no
CD changer is connected, appears on
the display.
When playing a CD from the external changer,
press preset buttons to select the disc for
playback. After selection, the CD is played.
When position with no CD inserted is selected,
appears on the display.
CD playback mode activation button
CD
NO CDC
Preset buttons
NO CD 2
12
11
A
D B
EC C
GB

AUX
AUX VOL
Third level of AUDIO settings
GALAGALA
PDC VOL* PDC VOL
Your radio has an external input allowing
playback from other audio sources.
sets sensitivity of the external input.
Passage to the next level of settings
Your radio automatically increases the volume
with increasing drive speed so that perceived
volume does not change. The rate of increase
can be set by pressing preset button
and turning of button . Higher numbers mean
sharper increase. When 0 is set, the volume
does not change.
Sometimes, excess volume can distract you
when parking your car. If your car is fitted with
“parking aid” device, the radio will lower the
volume to preset level when the “parking aid”
unit is active. Press preset button
and turn button to set the volume level, to
which the volume will be reduced auto-
matically during parking.

12
1
12
1
Setting tone
TREBLE
MIDTONE
BASS
Additional audio parameters
LOUD
LOUDNESS
LOUD ON OFF
MONO Press button and user preset button to
select a parameter; an indicator will mark the
parameter and you can then set the value by
turning button . treble setting
mid setting
bass setting
At lower volume, function boosts
the bass and treble. Pressing preset button and selecting activates this function.
Selecting deactivates it.
The stereo decoder is activated whenever the
input signal is strong enough. The decoder is
switched off when the tuner receives weak
signal. 812
1
12MONO OFF
MONO ON
Second level of AUDIO settings
AUDIO
BALANCE
FADER The stereo decoder is activated whenever the
input signal is strong enough.
Under certain circumstances, stereo sound is
interrupted and in low- quality, even if the
input signal is strong. This occurs for example
when driving in urban areas. You can turn off
the stereo decoder and listen to mono sound
with increased quality. Passage to the next level of settings
By pushing the button and passing to the
second level of settings by the preset
button these settings are available:
Setting the balance between the right and the
left speakers.
Setting the balance between the front and the
rear speakers.


8
12
AUDIO settings
User Settings

PHVOL*PHVOL
TA VOL Original handsfree set (if installed) can play
telephone sound through the radio and its
speakers. Set the desired phone call volume by
pressing preset button and turning
button .
If volume is turned down for normal listening,
important traffic message could be missed. It is
therefore advisable to set minimum volume for
traffic messages. If current volume is lower, it
will be increased to a value set by this
parameter. If current volume is higher, it will
not change. 12
1 Use function to set minimum volume
of traffic messages. Set this function by
pressing preset button and then
turning button .
Your radio remembers the volume, which was
set before switching the radio off. Higher
volume will be lowered to the value set by
parameter when the radio is turned on.
Set this function by pressing preset button and then turning button .
By pressing preset button you return
to previous menu level. TA VOL
TA VOL
ON VOL ON
VOL
ON VOL
BACK BACK
12
1
12
1
12
13
MENU button MENU
PDC*
PDC
ON
BEEP
BEEP ON OFF
Press button and then button
to display the setting of special functions:
If your car is fitted with “parking aid” device, the
display of your radio can display the distance
from an obstacle; the number of displayed
columns increases if the “parking aid” unit is
active. Press preset button and then
set to activate this function.
When storing tuned frequencies into presets,
the radio beeps. Pressing preset button
and selecting activates this function.
Selecting deactivates it.
The displayed data disappear after 10 seconds
of inactivity. Push of any button except for the
preset button closes the setting and the
selected values remain stored
11 12
12 12
User Settings
GB