height SKODA OCTAVIA 2010 2.G / (1Z) Amundsen Navigation System Manual

Range selector key NAV (Navigation)
28
•
Position;
•
latitude and longitude;
•
height (if at least 4 satellites are available);
•
GPS status (GPS_FIX - the position can be determined, GPS_FIX_3D - the height
can be determined);
•
The number of available and tracked satellit es (the number of available satellites
determines the GPS status).
Delete destinations in the destinat ion memory or in the list of the last destinations– Press the button while in a random menu of the Navigation.
– You can select the function key using the menu control
button .
– In the pop-up window, you can delete all manually and automatically stored desti-
nations or only the last destinatio ns using the function keys or
.Store or edit your home addressSave the current position as a home address– Press on the function key while in the main menu Navigation.
– If your home address has not yet been stored, confirm the following question with the function key .
– Press on the function key and your current position is stored as home address.Edit saved home address– If your home address has already been stored, the automatic route guidance starts after pressing the function key .
– If you wish to change your home ad dress, press the button and then the
menu point while in the menu Navigation.
Route guidanceEntering a stopover destinationIf, in addition to the displayed travel destination, a stopover destination is added,
proceed as follows. The stopover destinatio n can only be entered when starting the
route guidance.
– Select the destination and start the route guidance.
– Press on the range selector key to change into the main menu Navigation.
– Select a destination and start the route guidance.
– If you wish to store the newly entered destination as a stopover destination, press the function key .
– If you wish to end the route guidance wh ich has started, press the function key
.
Only one destination and one stopover destination can be entered during the route
guidance.
A corresponding navigation anno unce ment s ounds whe n re aching the stopover desti-
nation. The route guidance is renewed afte r a few seconds. Then you can re-enter a
new stopover destination.
If you enter a new stopover destination befo re reaching the original destination, you
must decide if you wish to overwrite the “old” stopover destination with the “new”
stopover destination.Route options The menu Route options is used to determine the criteria according to which a route
is to be calculated and what types of destin ations you wish to allow for the route calcu-
lation. The route options can also be changed during a route guidance.
– Press the button and then the function key while in the main
menu Navigation.
– Press on the function key .
SETUP
Delete destination memory
A10
All dtns.
Last destinations
Home addr.
Ye s
Position
Home addr.
SETUP
Enter home address
NAV
Stopover
New dtn.
SETUP
Route options
Route criteria
s34g.6.book Page 28 Thursday, January 14, 2010 8:48 AM