warning SKODA OCTAVIA 2015 3.G / (5E) Amundsen Bolero Infotainment System Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2015, Model line: OCTAVIA, Model: SKODA OCTAVIA 2015 3.G / (5E)Pages: 84, PDF Size: 8.21 MB
Page 58 of 84

If the map scale of the 2D Map or 3D Map is greater than 10 km (5 miles), then
the map is automatically displayed as 2D and aligned in the direction of north.
If the scale is increased beyond this value, then the map is switched back to
the original representation.
POI in the map
The device offers the possibility of up to 10 POI categories to be display on the
map.
Switch display on/off
›
Press in the  Navigation menu the function key 
 
→  POIs .
Select the displayed category
›
Switch on show POIs.
›
Press in the  Navigation menu the function key 
 
→  Map  → Select catego-
ries for POIs .
›
Select the desired POI category.
Guidance to the POI
›
Press the function key with the symbol of a POI in the map.
The following POI details are displayed.
If the function key includes several POIs, then they will be listed. Select the de-
sired destination from the list, then POI details will be shown.
›
Press the function key  Start.
Then a route to the destination is calculated and the route guidance starts.
If the navigation menu for setting the alternative routes is turned on, the guid-
ance for this route type (economic / fast / short) must be selected before start-
ing.
If the destination entry occurs during route guidance, the destination change
must be confirmed by pressing the function key  Start in addition to confirming
in the following menu that appears.
Road sign
The device offers the possibility of displaying the traffic signs stored in the
navigation data or detected by the front camera in the device screen 
F
» Fig. 41  on page 54 .
Turn on / off the display traffic signs  » page 63.
For some vehicles it is possible to set an alert when crossing the permitted
speed limited set by a road sign -  Traffic Sign recognition →  Warning .
For trailer towing, we recommend switching on the assistance systems option
Traffic Sign recognition  →  Trailer recognition (show road signs) .
Map Orientation
The map in the 3D display is aligned only with respect to the direction of travel.
The map in the 2D display can be oriented to the north or in relation to the di-
rection of travel.
A change of map orientation is only possible when the map is centred on the
vehicle position (the function key   or 
 is not displayed).
Change the map orientation
›
Press in the  Navigation menu the function key 
 in the area 
D
 
» Fig. 41  on
page 54 .
The map is oriented to the north or in relation to the direction of travel.
The arrow in symbol   always points to the north.
The map is oriented to the north
The map does not rotate, the vehicle position symbol   rotates.
Map oriented to the direction of travel
The map rotates, the vehicle position symbol   does not rotate.
Map scale
It is possible to change the map scale manually or to turn on the automatic
change of scale.
Symbols of the scale function keys
In the map area 
D
  » Fig. 41  on page 54  the following context-dependent func-
tion keys and information is displayed.
Manually set scaleAutomatically adjusted scale
Turn on / off the automatic change of scale
Map view in reduced scale
Current elevation
Manual change of scale
Map scale can be change in the following ways. 
55Navigation (Amundsen) 
Page 59 of 84

›Turning the control knob 
 .
› Touching the screen with two fingers and pulling them apart or closing them
together.
Enabling automatic scaling
› Press in the 
Navigation menu the function key  
 →  
 .
Press the function key  
 is highlighted in green. The manual scaling switches
to automatic scaling.
The automatic scale is only active as long as the map is centred on the vehicle
position (the function key  
 or   is not displayed).
If the automatic scale is active, the map scale will change automatically de-
pending on the type of roads travelled (motorway - smaller map scale / town
larger map scale) and from the manoeuvre to be carried out.
Turn off the automatic change of scale
› Press in the 
Navigation menu the function key 
 
→ 
 .
Press the function key   is highlighted in white. The automatic scaling
changes to manual change of scale.
The turning off occurs likewise when the map is moved or the map scale is
changed manually.
Map view in reduced scale
› Press in the 
Navigation menu the function key 
 
→ 
 or 
  
→ 
 .
The map scale is reduced for a few seconds and then restored.
Map alignment
The moved map can be centred/aligned to the vehicle, destination or route po-
sition.
In the map area 
D
  » Fig. 41  on page 54  the following function keys are dis-
played depending on the map display.
Aligning to the vehicle position (in the 2D map display -   or 3D map dis-
play -  )
Alignment to the destination position (in the destination position display -
 )
Route alignment (in the route display -  )
Route guidance
Introduction
This chapter contains information on the following subjects:
Destination management
57
Route calculation
57
Most common routes
58
graphical driving recommendations
58
Nav. announcements
58
Route information
58
Finish route guidance
59
Abort route guidance
59
The route guidance is as follows.
› Through graphical driving instructions in the device display screen and in the
display of the instrument cluster.
› With navigation announcements.
The unit tries to allow for continued guidance even if the navigation data is in-
complete or there is no data at all for the given area.
The route is recalculated each time if you ignore driving recommendations or
change the route.
Route guidance in demo mode
The Demo mode provides a travel simulation to the entered destination. The
function offers the chance to travel through the calculated route “virtually”.
When the Demo mode is turned on, a menu for route guidance in the Demo
mode or in normal operation is displayed before the start of route guidance.
Activation / deactivation of the Demo mode  » page 63, Advanced settings .
WARNINGThe navigation announcements provided may vary from the actual situa-
tions, e.g. due to out-of-date navigation data.56Navigation (Amundsen)  
Page 66 of 84

■  Avoid routes requiring toll stickers  - Switch use of routes requiring toll
stickers on/off for route calculation
■ Available toll stickers  - Selection of countries for which a valid toll sticker is
required (routes requiring toll stickers are used for route calculation)
Map
›
Press in the  Navigation menu the function key  
 →  Map .
■ Lane guidance  - Display of lane guidance on/off
■ Show favourites  - Switch on/off the display of favourites
■ Show road signs  - Switch on/off the display of traffic signs
■ Show POIs  - Switch on/off the display of POIs
■ Select categories for POIs  - Selection of displayed POIs (max 10 categories)
■ Show brands for POIs  - Switch on/off the display company logos at the POIs
Fuel options
›
Press in the Navigation menu the function key 
 
→  Fuel options .
■ Select preferred fuel station  - Select your preferred fuel station brand (the
selected station brand will be displayed in the first three positions of the list)
■ Fuel warning  - Switch on / off the display of the following warning (when the
fuel gauge reaches the reserve area)
Warning: fuel tank almost empty. Would you like to find a fuel station near-
by? with the following menu items.
› Cancel
 - Close the window with the warning
› Find
 - Find the nearest petrol station; by selecting the petrol station the
route guidance is started
Navigation announcements
›
Press in the  Navigation menu the function key 
 
→  Navigation announce-
ments .
■ Volume  - Volume control of the navigation announcements
■ Entertainment fading (nav. announce.)  - Setting the fading of the audio vol-
ume (e.g. radio volume.) with navigation announcements
■ No navigation sound during call  - Enable / disable the playback of navigation
prompts during a telephone conversation
Advanced settings›
Press in the  Navigation menu the function key  
 →  Advanced settings .
■ Time display:  - Select the time display in the status line
■ Time of arrival  - Estimated time of arrival at the destination
■ Travelling time  - Estimated travelling time to the destination
■ Status line:  - Selection of the target type for which the status line the route
and travel time are displayed according to the setting  Time display: (the se-
lection also affects the target type displayed in the map  » page 54)
■ Destination  - Final destination
■ Next stopover  - Next stopover
■ Note: national border crossed  - Switching on/off the display for information
on national speed limits when crossing the national border
■ Demo mode  - Switch on/off guidance in demo mode
■ Define demo mode starting point  - Enter the start point of the route guid-
ance in the demo mode
■ Cancel  - Cancel the entry
■ Position  - Enter the current vehicle position as the starting point
■ Address  - Enter an address as the starting point
Manage memory
›
Press in the  Navigation menu the function key 
 
→  Manage memory .
■ Sort by:  - Setting the configuration of the phone book
■ Surname  - Sort by contact name
■ Forename  - Sort by contact's first name
■ Define home address  - Enter the home address
■ Delete my POIs  - Delete the custom POIs
■ Update my POIs  - Update the custom POIs
■ Delete user data  - Delete user data (by pressing the function key  Delete and
confirming the deletion, the selected menu item is deleted) ■ Last destinations  - Delete the last destinations
■ Dest. memory  - Delete the stored destinations
■ Tour memory  - Deletes the stored tours
■ My points of interest (Personal POI)  - Delete the custom POIs
■ Entered cities  - Delete the history of places already entered via the address
■ Home address  - Delete the stored home address
■ Flagged destination  - Delete the flagged destination
■ Most frequent routes  - Deletion of the most travelled routes
63Navigation (Amundsen) 
Page 68 of 84

Driving dataFig. 51 
Driving data
›
Press the key  
→ 
  
→  Driving data .
Screen display  » Fig. 51
Distance travelled
Driving time
Average speed
Average fuel consumption
Approximate range 1)
Range (if the estimated range is less than 300 km, the vehicle starts to ap-
proach the symbol  )
One of the following memories can be selected with the function keys   
 .
› Since start
 - Driving data for the individual trip
› Long-term
 - Long-term driving data
› Since refuelling
 - Data since refuelling
DriveGreen
›
Press the key  
→ 
  
→  DriveGreen .
DriveGreen  based on the information regarding the driving style, the driving
efficiency is evaluated. Useful tips for reducing fuel consumption are also of-
fered.
ABCDEFVehicle conditionFig. 52 
Vehicle condition
›
Press the key   
→ 
  
→  Vehicle status .
In the screen, information regarding vehicle condition or function of the tyre
pressure monitor is displayed.
›
Using the function keys   
  select the menu item 
Vehicle status.
Function keys and screen  » Fig. 52AVehicle representation (the zones of the vehicle are shown in different
colours, corresponding to any warning messages that occur. The warn-
ing messages are displayed once you touch the “vehicle”) No message/warning messages relating to vehicle status and the num-
ber (if there is only one message, one warning message text is dis-
played)Display information about the status of the START-STOP system
ESC and TCS systems
›
Press the key   
→ 
 
→  ESC system: .
■ Activated  - Switch on all components of the ESC system
■ ASR off  - Switch off the TCS system
■ ESC sport  - Activation of ESC sport
Tyres
›
Press the key   
→ 
 
→  Tyres . 
1)
For vehicles with CNG drive the approximate range with gasoline and CNG is displayed separately.
65Vehicle systems 
Page 69 of 84

■Tyre Pressure Loss Indicator  - Tyre pressure monitoring function
■ SET    - Storing the tyre pressure values
■ Winter tyres  - Setting an alarm on reaching the speed limit for winter tyres
■ Speed warning  - Switching the function  Winter tyres on and off
■ Warning at  - Setting the speed for the warning
Assistance systems
›
Press the key   
→  
 →  Driver assistance .
■ ACC (adaptive cruise control)  - Setting for the adaptive cruise control
■ Driving programme:  - Set the vehicle acceleration when adaptive cruise
control is activated 1)
■ Normal  - Normal
■ Sport  - Sports
■ Eco  - Economical
■ Last distance selected  - Last selected distance on/off
■ Distance:  - Set the distance monitoring to the vehicles ahead
■ Very close  - Very small distance
■ Close  - Small distance
■ Medium  - Medium distance
■ Far  - Large distance
■ Very far  - Very large distance
■ Front Assist (ambient traffic monitor. sys.)  - Set the assistant for distance
monitoring to the vehicles ahead
■ Active  - Activate/deactivate the assistant
■ Advance warning  (Version 1) - Activate/deactivate warning
■ Advance warning  (Version 2) - Activating/deactivating and setting the dis-
tance level at which a warning occurs
■ Early  - Longer distance
■ Medium  - Medium distance
■ Late  - Short distance
■ Off  - Deactivation of the warning
■ Display distance warning  - Activate/deactivate distance warnings
■ Lane Assist  - Settings for Lane Assist
■ Active  - Activate/deactivate the assistant
■ Adaptive lane guidance  - Activate/deactivate adaptive lane guidance
■
Blind Spot Monitor  - Activation / deactivation of the assistant “Blind Spot
Monitor”
■ Dynamic Road Sign Display  - Settings for the Dynamic Road Sign Display
■ Show in instrument cluster  - Activation/deactivation of the additional traf-
fic signs in the display of the instrument cluster
■ Trailer recognition (show road signs)  - Activate/deactivate the Dynamic
Road Sign Display relevant for trailer operation
■ Top speed 2)
 - Set the top speed for towing a trailer
■ Warning 2)
 - Activation / deactivation and setting for the excessive speed
warning ■ Off  - The warning is deactivated
■ At + 0 km/h  - Warning when reaching the speed limit
■ At + 5 km/h  - Warning when exceeding the speed limit by 5 km/h
■ At + 10 km/h  - Warning when exceeding the speed limit by 10 km/h
■ At + 15 km/h  - Warning when exceeding the speed limit by 15 km/h
■ Driver Alert System  - Activate/deactivate the driver alert system
■ Proactive passenger protection  - Activate/deactivate proactive passenger
protection
Parking and manoeuvring
›
Press the key   
→ 
 
→  Parking and manoeuvring .
■ ParkPilot  - Settings for the parking aid
■ Activate automatically  - Activate/deactivate the compact parking aid dis-
play (when driving forward)
■ Front volume  - Adjust the volume of the beeps for obstacle detection in
front
■ Front tone setting  - Setting the pitch of the beeps for obstacle detection in
front
■ Rear volume  - Set the volume level of the beeps for the rear obstacle de-
tection
■ Rear tone setting  - Setting the pitch of the beeps for the rear obstacle de-
tection
■ Entertainment fading (parking)  - Lowers the audio volume (e.g. radio vol-
ume) with activated parking aid
■ Rear Traffic Alert  - Activate/deactivate the Rear Traffic Alert
1)
On vehicles with the choice of travel mode, this setting is done  » Vehicle Owner's Manual , chapter Selec-
tion of travel mode (MODE button) .
2)
Applies for the Superb.
66Vehicle systems 
Page 71 of 84

■Automatic locking  - Activate/deactivate automatic locking when starting
off
■ “Easy Open”  - Activation/deactivation of the contactless opening of the
boot lid
■ Acoustic confirmation  - Activate/deactivate acoustic signals when lock-
ing/unlocking the vehicle with an anti-theft alarm system
■ Open luggage compart. cover automatically  - Enable / disable automatic
reeling of the roll-up cargo cover
Seats
›
Press the key   
→  
 →  Seats .
■ Store seat position  - Storage of the driver's seat and exterior mirror positions
in the remote control key when locking the vehicle
■ Vehicle key activated  - Activate/deactivate storing the driver's seat posi-
tion and exterior mirror position when locking the vehicle
Instrument cluster (multifunction display)
›
Press the key   
→ 
 
→  Instrument cluster .
In this menu it is possible to hide/show the appearance of the menu items in
the instrument cluster multifunction display and reset the trip data.
■ Current consumption  - Display of current fuel consumption on/off
■ Average consumption  - Display of average fuel consumption on/off
■ Refuel quantity  - Display of refuel quantity on/off
■ Conv. consumers  - Display of fuel consumption of convenience consumers
on/off
■ Eco tips  - Switch on/off the display for tips on saving fuel
■ Travelling time  - Display of travelling time on/off
■ Distance travelled  - Display of distance travelled on/off
■ Average speed  - Display of average speed on/off
■ Digital speed display  - Display of current speed on/off
■ Dynamic Road Sign Display  - Turn on/off the display of detected traffic signs
■ Speed warning  - Winter tyres warning on/off
■ Oil temperature  - Oil temperature on/off
■ Reset "Since start" driving data  - Reset the single-trip memory in the device
screen and in the display of the instrument cluster
■ Reset "Long-term" driving data  - Reset the long-term memory in the device
screen and in the display of the instrument cluster
Time, date and unit setting›
Press   
→  Time and date .
Description of the time and date settings  » page 15.
›
Press the key   
→  Units .
Description of unit settings  » page 16.
Service
›
Press the key   
→  
 →  Service .
■ Vehicle ID no.  - Display the vehicle identification number (VIN)
■ Inspection … or … day(s)  - Number of km / day until the next service event
■ Oil change service … or … day(s)  - Number of km / day until the next oil
change
Reset to factory settings
›
Press the key   
→ 
 
→  Factory settings .
In this menu you have the possibility to reset the menu items in the settings of
the vehicle systems to factory settings.
■ Reset all settings and data
■ All settings  - Restoration of the settings  all menu items
■ Reset individual settings/data
■ Driver assistance  - Restoration of the  Driver assistance menus
■ Parking and manoeuvring  - Restoration of the Parking and manoeuvring
menu items
■ Light  - Restoration of the  Light menus
■ Background lighting  - Restoration of the  Background lighting menu
■ Mirrors and wipers  - Restoration of the  Mirrors and wipers menu
■ Opening and closing  - Restoration of the  Opening and closing menu
■ Instrument cluster  - Restoration of the  Instrument cluster menu
If one of the above menu items is selected, the system will ask you whether
you really want to restore the settings.
■ Cancel  - Return to higher-level menu
■ Reset  - Restore the settings
68Vehicle systems 
Page 76 of 84

Language characters15
LEAVING HOME67
Light67
Light assistance67
Light sensor - switch-on the lights67
List connected SmartLink devices
40
of available stations18
of telephone contacts35
Paired Bluetooth devices33
Stored destinations50
Traffic reports61
With folder / track list23
Locking/unlocking - Warning67
Luggage compartment - opening67
Luggage compartment cover67
M
Main menu CAR
64
Media22
Navigation47
Radio17
SmartLink40
SMS38
Manage favourites30
Manage memory63
Manoeuvre graphical driving recommendations
58
Nav. announcements58
Manoeuvring66
Map automatic scale
55
Display of traffic signs63
Display options54
Fast Map55
Lane recommendation63
Main menu54
Manual scale55
Map alignment56
Operation54
Orientation55
POI display63
Representation54
Road sign55
Media22
Audio source24
AUX26
Bluetooth Audio26
Browser23
File formats27
Foreword22
List23
Main menu22
Multimedia database24
Operation22
Playback23
safe removal of the data source16
SD card25
Select audio source22
Settings24
Supported media27
USB25
Voice control11
Memory function of remote control key68
Menu CAR64
Mirror Fold in when parked
67
Lower while reversing67
Synchronous adjustment67
MirrorLink44
Connection establishment44
Data transmission16
Disconnection44
Function problems45
Home menu44
Operation45
Mobile device data transfer16
Most common routes58
Multi-function display68
Multi-media AUX26
Multimedia USB
25
Multimedia database24
Mute9
My destinations50, 53
My Destinations50
My POI categories53
My POIs53
My tour59
Edit tour60
New tour59
N
Navigation
47
Abort route guidance59
Advanced settings63
Alternative routes62
Contacts50
Demo mode63
Destination details57
Destination memory50
Destination representation54
Dynamic route62
Edit tour60
Enter address48, 49
Enter destination in route50
Favourites50
Finish route guidance59
Foreword47
Fuel options63
GPS47
graphical driving recommendations58
Home address51
Image with GPS29
Import destination53
Imported destinations63
Input destination48
lagged destination51
73Index 
Page 79 of 84

Telephone Search32
Text messages37, 38
new38
received39
Time15
TMC Detail of the traffic report
61
dynamic route62
List of the traffic reports61
Requirements60
TMC (Traffic reports)60
Touch screen8
Tour59
Tour memory60
Traffic Detail of the traffic report
61
dynamic route62
List of the traffic reports61
Requirements60
Traffic jam ahead62
Traffic obstruction62
Traffic programme (TP)19
Traffic reports (TMC) Detail of the traffic report
61
List of the traffic reports61
Requirements60
Travel mode light67
Turning off the device8
Turning on the device8
Tyre pressure values65
Tyres65
U
Unit menus
8
Units16
USB25
User profile30
V
vCard
53
Vehicle - settings64
Vehicle condition65
Vehicle identification number68
Vehicle systems64
Ventilation70
VIN number68
Voice control11
commands13
Function requirements11
Help12
not recognizing a voice command12
Operation principle12
Settings16
Stop/restore input/13
switching on/off11
Voice command input correction13
Volume9
Volume setting9
W
Waiter Voice control
12
Warning messages65
Warning when unlocking /locking67
Window - Operation67
Window comfort operation67
Window operation67
Windscreen Automatic wiping when raining
67
Heating64, 69
Windscreen heating64
Wiper67
76Index