audio SKODA OCTAVIA TOUR 2011 2.G / (1Z) Blues Car Radio Manual

CD player
Using the systemInserting the CD –
Press the button CD , in order to select the source for the play function:
CD
(internal CD drive), EXT
(CD changer, if it is connected to the radio) or AUX.
– Carefully insert a CD into the CD case 7 until it is automatically drawn in. The
play function begins automatically. Ð
Operating the CD player Audio CD: Select track
–
Press the rocker switch  or
 during the play function of the CD, in order to
select the previous and/or the next title.
– Press the rocker switch  or
 for a longer period of time for fast reverse or
forward replay of the track. The play function is continued after releasing the
button.
MP3 Data: Select track
– Press the rocker switch  or
 during the play function of the CD, in order to
select the previous and/or the next title.
– Press the rocker switch  or
 for a longer period of time for fast reverse or
forward replay of the track. The play function is continued after releasing the
button.
– Briefly press the rocker switch  or
 for scrolling in the folders or in the
play lists (if they are present on the CD).
Function SCAN
– Press the rocker switch SCAN , in order to scroll through the CD. The first 10
seconds of each title are played.
– In order to return to the normal mode, press once again the rocker switch
SCAN .
– Press the rocker switch  or
 if you wish to select the previous or the fol-
lowing track. End the play function of the CD
– In order to end the play function of the CD and to activate the radio, press the
rocker switch A/F . The CD remains in the unit.
Ejecting CD
– Press the button 6 , the Cd is ejected.
Display of additional information (MP3 data)
In the display, you can select the display of additional information via the MP3 da-
ta using the station keys 1 -
6 :
● 1 - Number of the folder and number of the track;
● 2 - Name of the track;
● 3 - Name of the performer;
● 4 - Name of the album;
● 5 - Name of the data;
● 6 - Name of the folder.
Note
● If the ejected CD is not removed, it is drawn in again for safety reasons.
● If the radio is functioning in the TP mode before changing to the CD mode, the
play function of the CD is interrupted during the traffic reports and the unit
switches over to the radio mode. After the traffic reports have ended, the unit
switches back once again to the CD mode. Ð
Replay the tracks in random order –
Press the rocker switch MENU , in order to activate the menu Set-up.
– Select a function of the MIX menu with the help of the station keys.
– Set the desired value by turning the button 1 .
MIX
Play function of titles in random order.
● MIX OFF - the function of the menu is switched off;
● MIX CD - Plays the tracks on a CD in random order; 6
CD player

●
MIX FLD - Play function of titles in random order in a certain (folder);
● MIX PLS - Play function of the playlist (folder of selected tracks from individual
folders, which is stored on the CD). Is only displayed when a playlist is created for
the replayed CD. Ð
General information for MP3 operation Requirements for the MP3 data and data carrier
●
CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
● The CDs must correspond to the ISO 9660 Level 2 standard as well as the Jo-
liet data system (single and multi-session).
● Data names must be no longer than 64 characters.
● The list structure is restricted to a depth of 8 list levels.
● The name of the artist, the album and the title of the reproduced MP3 data
can be shown as ID3 tag, providing this information is available. The list and data
name will be displayed if there is no ID3 tag.
● Playlists are not supported.
Bit rate (data flow per time unit)
● The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3
data with variable bit rates.
● The indicated playing time data with variable bit rates is not reliable. Ð
Information on how to use a CD CD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive (con-
densation). This can effect the CD jump or impair the play function. In such cases
wait until the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather
from inside to outside with a soft lint-free cloth. In case of severe layers of dirt we
recommend to clean the CD with a commercially available CD cleaner. Also in this
case do not clean the CD in the direction of a circle but rather from inside to out-
side and then let it dry off. Overheating protection
If the temperature in the unit exceeds 85°C, the play function of the CD is ended
for safety reasons. CAUTION
● Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the
surface of the CD could get damaged!
● Never expose the CD to direct sun rays!
● Please never write or affix the CD! Note
Dirt or damage of a CD can lead to difficulties when “reading” the information. The
difficulty in reading the error depends on the dirt or on the severity of the me-
chanical damage. Severe scratches cause reading errors which can make the CD
jump or
“get stuck ”. All CDs must be treated carefully and always be stored in a
protective case. Ð
Input AUX-IN The input for external audio sources AUX-IN is located below the armrest of the
front seats and is marked with the logo


.
Activating an external audio source
– Press the button CD and once again the button
CD in order to select the ex-
ternal input. The play function starts automatically after connecting the exter-
nal source.
End play function of the external source
– Press the rocker switch A/F . It starts the play function of the last selected ra-
dio station.
– Press the button CD and select the CD source for the play function.
An external audio source connected to the AUX-IN socket is merely replayed via
the radio and the loudspeakers. The external audio sources cannot

be controlled
via the radio.
You can select another audio source on the radio at any time. As long as the ex-
ternal audio source is not switched off, it remains always active in the back-
ground.  7
CD player

Please refer to the Owner's manual of the respective manufacturer for the opera-
tion of the external audio source.
Use the standard jack plug 3.5
mm for the AUX-IN socket. If the external audio
source does not have this jack plug, you must use an adapter.
Adjust the play function volume of the external audio source
The play function volume of the external audio source can be changed via the vol-
ume control on the radio.
Depending on the connected audio source, the output volume on the external au-
dio source can be changed.
You can also change the input sensitivity of the AUX-IN socket ⇒ page 4 in order
for the play function volume of the external audio source to adapt to other audio
sources or to avoid distortions of the play function volume. WARNING
● On no account place an external audio source on the dash panel. You could
make sudden manoeuvres in the passenger compartment and injure the occu-
pants.
● On no account place an external audio source close to the airbags. You
could be thrown back in the passenger compartment by the airbags being de-
ployed and injure the occupants.
● You must not hold the external audio source in the hand or on the knees
while driving. You could make sudden manoeuvres in the passenger compart-
ment and injure the occupants.
● Always guide the connection cable of the external audio source in such a
way that is does not restrict you when driving. CAUTION
The AUX-IN socket must only be used for audio sources! Note
● Your radio has no control over the level setting of the external source. Make
sure that the highest quality is achieved by a suitable combination of input sensi-
tivity and output sensitivity of the external source (volume control). You will find
detailed information for this setting in the operating instructions of the units.
● If an external audio source is connected via AUX-IN, which is equipped with an
adapter for external power supply, it can occur that the audio signal is interrupted.
This depends on the quality of the adapter which is used.
● The loudspeakers in the vehicle are matched to a power output of the radio of
30°W. Ð8
CD player