display SKODA ROOMSTER 2008 1.G Dance Car Radio Manual

Radio2
Radio
Radio - Overview
Rotary/push knob
− switching on and off (pressing)
− Volume control (rotate)
− other function settings in various menus
Button
− Activation of CD mode (CD-DA/CD-R/CD-RW/MP3, multisession)
− Direct selection of the CD via station keys
− Activation of the mode for external audio source
Button to activate the FM radio mode
Button to store the six stations with the strongest reception in the respec- tive waveband
Button
− fast search in the respective waveband
− Scroll through the contents of the CD
Buttons
− manual station finding in radio mode
− Selecting title in CD mode
Buttons
− fast station finding in radio mode
− Pre-winding the title in the CD mode
Button for adjusting the sound and volume distribution
Button to activate the AM radio mode
Button
− Display of radio text information
− Display of additional information of MP3-CDs
Button to call up the menu settings of the parameter for radio or CD player
Station keys
− store and select the RDS station
− CD selection
− Selecting the parameter for user settings
CD - eject button
CD-case
Display - screen
Button for activating the traffic information mode
Important information
Warranty
The same warranty terms apply for the equipment as for new vehicles.
After the expiration of the warranty, a unit in need of repair will be replaced inex- pensively with a reconditioned, original unit with spare part warranty. However it is required that there is no housing dama ge and no unauthorised repair attempts have been made.
Note
A damage in the sense of the warranty must not be the result from improper handling of the system or from unprofes sional repair attempts. In addition, no external damage must be present.
Radio mode
The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in su ch a way that acoustic signals from the outside, such as e.g. a Martins horn from utility vehicles (police cars, ambulances and fire brigade), can be heard at any time.
A1
A2CD
A12
A3FM
A4AS
A5SCAN
A6
A7
A8
A9AM
A10INFO
A11MENU
A12
A13
A14
A15
A16TP
s1uk.3.book Page 2 Wednesday, May 2, 2007 11:07 AM

Radio3
WARNING
Please always pay full attention to the traffic situation around you! As the driver you are fully responsible for the traffic safety. Only use the functions in such a way that you always maintain the control over your vehicle in all traffic situations!
Using the display
Carefully handle the display because dent s and scratches can occur through pres- sure of the finger or contact with sharp objects.
The display can be cleaned with a soft cl oth and finger marks can be wiped away with pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience co ding. If the radio is being operated for the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the batte ry, first of all switch on the ignition and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered. In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda importer.
As the unit only functions after entering the safety code, this practically excludes its use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cl uster. Through this it is automatically decoded (convenience coding). A manual entry of the code is normally not necessary.
Code entry
– Switch on the radio if the ignition is on. SAFE is displayed and then
0000 .
– Enter the safety code using the station keys .
– Confirm the safety code by pressing the button .
If you have confirmed a wrongly entered co de, you can repeat once again the entire process.
If the code number is entered incorrectl y for the second time, the unit will be blocked for approx. one hour. It is only po ssible to repeat the entry of the safety code after an hour has expired and while the unit is switched on and the ignition key remains in the ignition lock.
The cycle - two attempts, blocked for an hour - furthermore applies.
Basic setting
Switching the unit on and off
– The system is switched on or off by pressing the rotary/push knob .
If the key is pulled out of the ignition lock when the system is switched on, the system switches off automatically. You can switch on again the unit by pressing the rotary/push knob . If the engine is switch ed off, the unit (protection of the vehicle battery before discharging) switches of f automatically after approx. one hour.
A12

A1
A1
s1uk.3.book Page 3 Wednesday, May 2, 2007 11:07 AM

Radio4
If you have switched off the radio by withdrawing the ignition key, the radio switches on again once the ignition is on.
Audio settings
– Select the desired parameter after pressing the button and then
the station key .
– Set the desired value by turning the rotary/push knob .
You can select the following parameters:
•TREBLE - treble setting;
•MIDTONE - midtone setting;
•BASS - bass setting;
•LO U D - in case of low volume level, this function reinforces the range of bass and treble frequencies;
•MONO .
The selection OFF of the stereo coder is automatically regulated. If the signal is strong, a stereo reception is made.
The selection ON - under certain circumstances the reception of the stereo signals can be distorted, even if the signal is strong. e.g. while driving through urbanization. The stereo coder is deactivated and the re ception quality is clearly improved by activating the force Mono reception.
Note
The text on the display goes out 10 seconds after the last press. After pressing any button, except the station keys , the sett ing is finished and the selected values are stored.
Second level of the audio settings
– You can call up the second level of the audio settings by pressing the
button and by subsequently pressing the station key .
You can select between the following parameters:
•BALANCE - setting of the volume ratio between the right and left side;
•FA D E R - setting of the volume ratio between the front and the rear.
Third level of the audio settings
– You can call up the third level of the audio settings by pressing the
station key  again.
You can select between the following parameters:
GALA
Your radio increases automatically its volume with the increasing vehicle speed. A higher setting value results in a stronger volume increase.
PDC VOL
If your vehicle is equippe d with “parking aid”, the volume is automatically decreased to a pre-defined value, when the “parking aid” is active.
PH VOL
If your vehicle is equipped with a handsfree system, you can set the desired volume of the mobile phone calls.
TA VO L
The setting of the minimum volume for receivable traffic reports.
The volume is increased by the value set by this parameter, if its current value is lower. Otherwise the volume is not changed.

A12
A1
A12
A12
A12
s1uk.3.book Page 4 Wednesday, May 2, 2007 11:07 AM

Radio5
ON VOL
Your radio stores the last volume set before switching off. If the volume is higher than the value set in the ON VOL, the volume is reduced to this value after switching on the radio again.
BACK
You can return to the second level of th e audio settings by pressing this button.
Special functions
Setting the special functions
More and more broadcasting companies, mainly USW stations transmit
RDS information in addition to the pr ogram. E.g the station name and the
traffic status of the set statio n belong to this information.
Setting the radio functions
– If you press the button , the menu for setting the special func-
tions is shown on the display.
LEARN
This function enables an interference-fre e and clear reception as well as a fast station finding. The radio has its own list of receivable frequencies, which are arranged according to program identification (PI) and signal strength. This makes it possible to change to another frequency of the station which can be taken from a list containing the altern ative frequencies of the stations covering the area.
•LEARN ON - the radio constantly updates and classifies all available frequen- cies depending on the area in which you are located. This leads to short signal fail- ures;
•LEARN OFF - under certain circumstances the updating of the Learn list can cause disturbances. Then the radio te sts each frequency for switch-over.
REGIONAL
Certain programs of the broadcasting companies are divided into regional programs at specific times. That is why in individual regions the regional programs of a station can broadc ast different contents.
First of all the unit attempts to set only alternative frequencies of the selected station.
If the quality is however so low, that there is a risk of a “program loss”, the unit also accepts “related” frequencies.
•REGIONAL ON - the receiver switches to a regional “related” station, if the reception of the current station could be interrupted;
•REGIONAL OFF - the receiver can access the regional “related” station unlim- ited.
SEEK
•SEEK LOCAL - stops the station finding on the local stations with the strongest signal;
•SEEK DX - stops the station finding on all available stations.
AUX
Your radio is equipped with a connection which enables the play function of external sources.
AF
The function alternative frequency (AF) en sures that the best receivable frequency of the selected station is automatically an d precisely set. The replay of the broad- cast can be muted briefly during the search process according to the best receiv-able frequency. If no alte rnative frequency of the set station can be found and the station no longer offers a satisfactory quality, then please select another station.
Second level for setting the special functions
– You can call up the second level of the setting for special functions by
pressing the button and by subsequently pressing the station
key .
MENU
MENU
A12
s1uk.3.book Page 5 Wednesday, May 2, 2007 11:07 AM

Radio6
PDC
If your vehicle is equi pped with “parking aid” and after it is activated, the distance to the obstacle is shown on the display. The distance is shown by a column.
BEEP
Switching on or off the tone signal when storing the radio stations.
PHONE
If your vehicle is eq uipped with a handsfree system, the volume of the radio is auto- matically reduced during a phone call.
ILLUM
Switch on (value 1) or switch off (value 2) illumination of the controls for the radio.
BACK
You can return to the previous level of the setting by pressing this button.
External amplifier
If you have connected an external amplifier, you can choose between six
audio effects.
– Press the button and select with the station keys between the
offered audio effects:
•LINEAR - Standard play function without special weighting, adapted to all music types and voice play function;
•SPEECH - suppresses surrounding noises so that the voice can be clearly heard;
•ROCK - suitable for play function of rock music;
•CLASSIC - suitable for play function of classic music;
•POP - suitable for play function of pop music;
•LIVE - suitable for play function of Live concerts or recording.
Radio mode
Display contents
The display shows the following content:
the selected radio station (its frequency or designation);
the frequencies or the designations of the radio stations in the memory of the radio;
the symbol points to the al ready selected radio station;
Activation for the reception of traffic reports;
selected waveband.
Waveband switch-over
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There are each 6 memory spaces available on these levels.
Activation of the FM waveband
The FM waveband is acti vated when pressing the button . By pressing the button several times, you can move betw een the memory levels FM1, FM2 and FM- AS.
A12
Fig. 1 Radio mode
AA
AB
AC
AD
AE
FM
s1uk.3.book Page 6 Wednesday, May 2, 2007 11:07 AM

Radio7
Activation of the AM waveband
The AM waveband is activated when pr essing the button . By pressing the button several times, you can move between the memory levels AM1, AM2 and AM-AS.
The process of searching for and storing the radio stations
Manual search
– Set the frequency of the desired radio station by pressing the button
or .
Automatic station finding SEEK
– The radio searches for the next radio station in the selected waveband
by pressing the button or .
Store station
– After selecting the radio station, hold the station key , on which it
should be stored until it briefly switches to mute and a brief signal
sounds.
Automatic station finding with storing the radio stations
– Press the button . An automatic st ation finding is started during
which the 6 stations with the strongest signal are stored. The display
STORING appears on the display and the volume is reduced.
When storing the radio stations on the station keys is finished, you can call up the desired radio station by pressing a station key .
Note
The stored radio stations are updated an d stored once again by repetitively pressing the button .
Radio text
Certain radio stations transmit additi onal text information - called radio
text.
– The information of the radio text is displayed by pressing the button
.
Note
•The text information must not be available to all radio stations.
•Depending upon the quality of the received signal, the radio needs a specific time, in order to correctly read all the illustrated characters.
•If the selected radio station does not transmit any radio text, the message TEXT UNAVAILABLE appears.
Tra f f i c r e p o r t s
Activating and deactivating the traffic information
Press the button , TP appears in the display. If a set radio station does not transmit a traffic report, the radio searches for a station which transmits the traffic report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO INFO is shown on the display.
An incoming traffic report au tomatically interrupts the CD play function or listening to a radio station, which at that moment is not transmitting a traffic report. TRAFFIC is displayed on the display. At the end of the traffic report, the radio automatically returns to the original play function.
If you wish to deactivate the traffic in formation, press once again the button , TP goes out on the display.
AM


A12
AS
A12A12
AS
INFO
TP
TP
s1uk.3.book Page 7 Wednesday, May 2, 2007 11:07 AM

Radio8
Note
The information emitted by a radio station can be received while listening to another radio station. If no recept ion of traffic reports is possible, NO INFO appears on the display.
Function SCAN
Stations of a waveband can be played briefly one after the other (for ten
seconds).
– Press the button , the radio searches automatically all available
stations of the current waveband.
– If you wish to select other radio stations, press the button  or .
– End the automatic finding by pressing the button OK. The current
radio station remains selected.
– In order to call up the original radio station, press the station key
CANCEL .
Program types (PTY)
This function enables a finding of radio stations with the desired program
type.
Selecting program types (PTY)
– Press the button and then the station key PTY. Rotate the
rotary/push knob and select the desired program type, which is
shown on the display.
– Confirm the selection of the program type by pressing the station key
OK, the radio is switched to mute and starts to search for radio
stations with the desired program type.
– To end the finding and to listen to the found radio station, press the
station key OK or CANCEL, in order to return to the previous
program.
You can select between the following program types:
Note
•If you have selected NONE as program type, the station finding stops on each radio station.
•If no radio station with the desired program type was found, the radio returns to the original station.
•The selection of the program type is only possible in the FM waveband.
•The program type ALARM is emitted in case of a national or local threat.
SCAN
A12
A12
A12
SCANA12
A1
A12
NONE - not specifiedWEATHER - weather
NEWS - newsFINANCE - finance
AFFAIRS - affairsCHILDREN - children
INFO - informationSOCIAL - social
SPORT - sportRELIGION - religious program
EDUCATE - educationPHONE IN - phone in live
DRAMA - dramaTRAVEL - travel programs
CULTURE - cultureLEISURE - leisure
VARIED - various musicCO U N T RY - country music
POP - pop musicJAZZ - jazz music
ROCK - rock musicNATION - nation music
EASY - easy musicOLDIES - oldies
LIGHT - light musicFOLK - folk music
CLASSICS - classic musicDOCUMENT - documentaries
OTHER - other program typesSCIENCE - science
A12
s1uk.3.book Page 8 Wednesday, May 2, 2007 11:07 AM

The CD changer9
The CD changer
Using the system
Inserting the CD
Your radio is fitted with a player, which enables the play function of CD-
DA/CD-R/RW/MP3, multisession.
– Press the button . If no CD is inserted, NO CD appears in the
display. If a CD has already been inserted, the play function begins at
the point where the last play function was interrupted.
The display shows the following content:
current title number;
Information for playing time;
Assignment of the station keys ;
Display of the active REPEAT mode;
Display of the active MIX mode.
Operating the CD player
Select track
– Press the button or during the play function of the CD, in order
to select the previous and/or the next title.
– Press the button or for the fast finding, the reverse or forward
search starts after releasing the button.
Function SCAN
– Press the button , in order to scroll through the CD. The first 10
seconds of each title are played. At the same time the title number is
displayed in the display.
– In order to call up the automatic st ation finding, press the station key
OK. The found title is replayed.
End the play function of the CD
– Press the button or in order to end the play function of the
CD.
Note
If the ejected CD is not removed, it is drawn in again for safety reasons.
Fig. 2 CD mode
CD
AA
AB
ACA12
AD
AE


SCAN
A12
FMAM
s1uk.3.book Page 9 Wednesday, May 2, 2007 11:07 AM

The CD changer10
Play function of MP3 data
Button
– Press the button , in order to scroll through the CD. The first 10
seconds of each title are played. At the same time the title number is
displayed in the display.
– In order to select a folder and to scroll through its content, press the
relevant station key .
– In order to call up the automatic st ation finding, press the station key
OK. The found title is replayed.
Button
– Press the button , the information for the current folder and title
is displayed under MP3 INFO on the display.
Display of additional information
– Press the station key ID3 INFO, the additional information for the
current title is displayed on the display.
The display shows the following content:
Information for title. If no information was stored on the CD, UNAVAILABLE appears in the display;
the number of the folder, from wh ich the current title is replayed;
Assignment of the station keys , selection of the previous  or next  folder, selection of the information display for current title FILE;
Display of the curr ently played title;
Expiration of play function time.
Selective functions in CD mode
– Press the button during the CD play function.
The display shows the following functions:
MIX
Play function of titles in random order.
•OFF - Play function in continuous order;
•TRACK - Play function of titles in random order in a certain folder;
•FOLDER - is a CD inserted with MP3 data, the titles in random order are played from randomly selected folders.
REPEAT
Selection of the mode for repeating the title.
•OFF - Play function in continuous order;
•TRACK - repeated play function of the selected title;
•FOLDER - is a CD inserted with MP3 data, the titles are repeated from the folder, which was active when starting the repeat mode.
AUX
Your radio is equipped with a connection which enables the play function of external sources.
Fig. 3 Play function of MP3 data
SCAN
SCAN
A12
A12
INFO
INFO
A12
AA
AB
ACA12
AD
AE
MENU
s1uk.3.book Page 10 Wednesday, May 2, 2007 11:07 AM

The CD changer11
Information on how to use a CD
CD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive (condensation). This can effect the CD ju mp or impair the play function. In such cases wait until the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather with a soft fluffly cloth from inside to outside. In case of severe layers of dirt we recom- mend to clean the CD with a commercially available CD cleaner. Also in this case do not clean the CD in the direction of a circ le but rather from inside to outside and then let it dry off.
Caution
•Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the surface of the CD could get damaged.
•Never expose CDs to direct sun rays!
•Please never write or affix the CD!
Note
Dirt or damage of a CD can lead to diffic ulties when “reading” the information. The difficulty in reading the error depends on th e dirt or on the severity of the mechan- ical damage. Severe scratches cause reading errors which can make the CD jump or “get stuck”. All CDs must be treated carefu lly and always be stored in a protective case.
External CD changer
Using the system
Your radio can be equipped with an original CD changer which can be
installed in your vehicle.
– In the mode of the integrated CD player, press the button , so that
the play function of the external CD changer is activated. If no external
CD changer is connected, NO CDC appears in the display.
– Select a CD with a station key . NO CD is displayed for not assigned
positions.
The display shows the following content:
current title number;
Information for playing time;
Assi gnme nt of the s tation key s to the CDs , se lect the rele vant CD by pre ss ing;
Display of the currently replayed CD;
Display of the active MIX mode.
Fig. 4 Mode of the external CD changer
CD
A12
AA
AB
ACA12
AD
AE
s1uk.3.book Page 11 Wednesday, May 2, 2007 11:07 AM