wheel SKODA ROOMSTER 2009 1.G Cruise Navigation System Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2009, Model line: ROOMSTER, Model: SKODA ROOMSTER 2009 1.GPages: 20, PDF Size: 1.39 MB
Page 14 of 20

Navigation
12
The route will be recalculated if you leave or disregard the route that was originally  calculated. This process  
takes only a few seconds. 
The last voice response can be repeated by pressing the button  . The volume  of a navigation recommend 
ation can be changed whilst it is being made. 
If the text  
Off Road
 appears on the display, it means you are located on a non-digi- 
talised street, e.°g. on a farm track. The  
GPS satellites will not be able to reach the  
aerial once you are in a tunnel or undergr 
ound garage. The unit will orientate itself  
via the wheel sensors. If you  
try to carry out a route calculation in this situation, you  
may hear the message: “You are located on 
 a non-digitalised road”. Drive on until  
the display  
Off Road
 disappears.
Navigation settings– Press the button   and then the button  . – The desired setup of the navigation can be selected and confirmed  
using the button  .
You can select the following settings: Spoken information On  - you will obtain acoustic driving re
commendations for the route during the  
route guidance. Off 
 - the acoustic driving recommendations are switched off during a route guid- 
ance. Auto 
 - the acoustic driving recommendations are switched off during a phone  
conversation. The route is only displayed. Demo mode If the demo mode is switched on, a rout 
e guidance can be started via the naviga- 
tion. Then the unit simulates the journey fr 
om the accepted location to the entered  
destination. First of all  
you can enter manually the lo
cation for a journey demon- 
stration. 
Time display Driving time 
 - displays the estimated driving time until the time of arrival at the  
destination or at the next stopover destination. Arrival 
 - displays the clock until the estimated 
time of arrival or the next stopover  
destination is reached. Deleting last destinations erase individually 
 - opens the list of the last destinations whenever you select  
manually the destination to be deleted. erase all 
 - erases all the last destinations after further confirmation. 
Delete tours erase individually 
 - opens the list of the stored tours whenever you select manu- 
ally the tour to be deleted. erase all 
 - erases all the stored tours after further confirmation. 
Tyre  ch a n g e While driven distances are measured by the navigation system via the turning of the  wheels, the changed tyre sizes affect the a 
ccuracy of the navigation e.°g during the  
announcement of the navigation re 
commendations. If you select 
tyre calibration
,  
the navigation adapts to the changed tyre size. Enter your location manually The navigation system will need some time for an exact definition of your position  if you have transported your vehicle using th 
e train or a ferry. Your position can be  
entered manually if the automati 
c definition is not successful.
INFO
NAV
SETUP
A1
s28k.book  Page 12  Friday, May 16, 2008  10:17 AM