turn signal SKODA ROOMSTER 2012 1.G Swing Car Radio Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2012, Model line: ROOMSTER, Model: SKODA ROOMSTER 2012 1.GPages: 15, PDF Size: 2.43 MB
Page 6 of 15
›PDC VOL - If your vehicle has been fitted with the “Parking aid (PDC)” driver'sassistant system, the volume is automatically reduced to a pre-defined valuewhen the “parking aid (PDC)” is active;›GALA - the car radio will increase the volume in response to an increase inspeed (higher figures result in a steeper increase in volume);›LOUD - in case of low volume level, this function reinforces the range of bassand treble frequencies.
Ð
Setting the special functions
›
Press the menu control button
2
for a long period of time.
›
Select the individual functions of the menu with the help of the station keys.
›
Set the desired value using the menu control button
2
or with the help of thestation keys.
AUXSwitching on or off the functions of the external audio source.
Setting of the input sensitivity AUX LEV:
›LEV 1 - high level, used in particular for notebooks;›LEV 2 - middle level, used for cassettes or CD player;›LEV 3 - low level, used for MP3 player.
PHONEIf your vehicle is equipped with a handsfree system, you can switch on or off themonophone play function of the mobile phone calls via the loudspeakers of thevehicle.
BEEPSwitching on or off the tone signal when storing the radio stations.
ILLUMSwitch on (value 2) or switch off (value 1) the rear lighting of the control buttons.
AFThe function alternative frequency (AF) ensures that the best receivable frequen-cy of the selected station is automatically and precisely set. The replay of thebroadcast can be muted briefly during the search process according to the bestreceivable frequency. If no alternative frequency of the set station can be foundand the station no longer offers a satisfactory quality, then please select anotherstation.
REGCertain programs of the broadcasting companies are divided into regional pro-grams at specific times. That is why in individual regions the regional programs ofa station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selectedstation.
If the quality is however so low, that there is a risk of a “program loss”, the unitalso accepts “related” frequencies.
›FIX - the receiver switches to a regional “related” station, if the reception of thecurrent station could be interrupted;›AUTO - the receiver can access the regional “related” station unlimited.
BT-AUDIOEnables a wireless transfer of MP3 data from the telephone preinstallation.
Ð
Radio mode
Changing the frequency band
›
Press the button RADIO.
Your radio is equipped with FM and AM wavebands. They are divided in 6 memorylevels, i.e. 3 levels for FM and 3 levels for AM.
Activation of the FM bandActivate the FM band by pressing the RADIO button for a long time followed bythe FM
12
button. By briefly pressing the button RADIO, you can select betweenthe memory levels FM1, FM2 and FM3.
Activation of the AM bandActivate the AM band by pressing the RADIO button for a long time followed bythe AM
12
button. By briefly pressing the button RADIO, you can select betweenthe memory levels AM1, AM2 and AM3.
Ð
The process of searching for and storing the radio stations
Manual search
›
Search the frequency of the desired radio station by turning the menu controlbutton
2
.
4General information
Page 7 of 15
Store station›After selecting the radio station, hold the station key 12, on which it should be
stored until it briefly switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations›
Press AS. An automatic station finding is started during which the 6 stations
with the strongest signal in the memory level FM3 and/or AM3 are stored.
When storing the radio stations on the station keys
12
is finished, you can call up
the desired radio station by pressing a station key
12
.
Note
The stored radio stations of the current waveband are updated and stored once
again in the memory level FM3 and/or AM3 by repeatedly pressing the button AS.
Ð
Function SCAN
The stations of a waveband can be played briefly one after the other (for ten sec- onds).
›
Press the menu control button
2
, the radio searches automatically all available
stations of the current waveband.
›
In order to call up the original radio station, press the station key CANCEL
12
.
›
End the automatic finding by pressing the button OK
12
. The current radio sta-
tion remains selected.
›
If you wish to select other radio stations, press the button SKIP
12
.
Ð
RDS functions
Certain radio stations transmit additional text information - designated as radio
text.
›
The information of the radio text is displayed by pressing the button INFO.
Note
■
The text information must not be available to all radio stations.■Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters.
Ð
Traffic information function
Activating and deactivating the traffic announcements
Press the button TP
,
TP appears in the display. If a set radio station does not
transmit traffic announcements, the radio searches for a station which transmits
traffic announcements.
An incoming traffic report will automatically interrupt CD playback. At the end of
the traffic announcement, the radio automatically returns to the original play
function.
If you wish to deactivate the reception of traffic announcements, press once
again the button TP
,
TP goes out on the display.
Ð
5General information