light SKODA SCALA 2020 Owner´s Manual

168Storage compartment under the front seat168Storage compartment for an umbrella168Phonebox169Cup holder169Multimedia holder169Waste container169Ashtray and cigarette lighter170Folding table17012-Volt power socket171Roof rack and hitch171Roof rack171Swivelling hitch173Maintaining and cleaning173Service events173Service work, adjustments and technical
changes174Interior174Exterior176Ice scraper on the fuel filler flap176Technical data and speci

ignition is switched on or after the engine has been
started.SymbolMeaningIndicates a warning together with
another warning light

Lighting, windscreen wipers and
washers
Exterior lighting Functionality
Unless otherwise stated, the light works when the
ignition is switched on.
Daylight running lights
The daytime running lights illuminate the area in
front of the vehicle.
For vehicles for certain markets, they also illumi-
nate the rear vehicle area.
Operating conditions
q The lights switch is in position
, or .
Switching the low beam on/off automatically
The low beam is automatically switched on or o

Fog lightPositions for pulling out
the light switch1
Fog lights - the
warning light in the
instrument cluster il-
luminates
2
Rear fog light - the
warning light in the
instrument cluster il-
luminates

Troubleshooting
Turn signal light defectiveflashes faster - turn signal light on the right de-
fective

Replace light bulbs
What you should be mindful of
DIY replacement of the following bulbs is possible.
Have the remaining light sources replaced by a spe-
cialist garage.
The new bulb must conform to the specification of
the original light bulb. The name of the bulb is
marked on the bulb socket.
After changing a bulb in the high beam or in the front
fog light, have the headlights adjusted by a specialist
garage.
CAUTION
Halogen lamps are pressurised and can burst during
replacement!

Automatic switching on/off of the footwell light-
ing
The lighting only works when the dipped or parking
lights are on.
The lighting is also switched on automatically after
opening the door (e.g. when getting in or out).
Settings
The footwell lighting is set in the following menu in
the Infotainment system.

Or:

Interior ambient light
Usage
The ambient lighting ensures a comfortable atmos-
phere in the vehicle interior.
The lighting only works when the dipped or parking
lights are on.
The lighting is also switched on automatically after
opening the door.
Settings
The ambient lighting is set in the Infotainment sys-
tem, in the following menu.

Or:

Windscreen wipers and washers
Operating conditions
Operating conditions for windscreen wipers
q Engine compartment flap closed.
q Boot door closed.
q Ignition is switched on.
Operating conditions for the windscreen washer
system
q Engine compartment flap closed.
q Boot door closed.
Operation
WARNING
Risk of an accident!
At low temperatures, windscreen washer fluid can
freeze on the windscreen and restrict visibility.

Driver information systemAnalogue instrument panel
OverviewATachometer with indicator lightsBDisplayCSpeedometer with indicator lightsDBar with indicator lightsEMultifunction button:

Set time
The time is set in the following menu in the Infotain-
ment system.

Setting the brightness of the instrument cluster
lighting
The brightness is adjusted automatically according
to the given lighting conditions.
The brightness is adjusted with the dipped beam
switched on in the infotainment in the following
menu.

Or:

Set the variant of the display

Risk of collision in a speed range of 30-60 km/h
The system warns of a collision hazard first. If the
driver does not respond, the vehicle is automatically
braked.
Operating conditions
q Front Assist activated.
q Driving speed between 5-60 km/h.
Speed limiter Functionality
The speed limiter controls the maximum driving
speed according to the set speed limit.
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
Status display in the instrument cluster display illuminated - the cruise control is activated.
When the control starts,
is highlighted and the
set limit is displayed.
illuminated - cruise control is active
flashing - the set limit is exceeded
Operating conditions
q The driving speed is higher than 30 km/h.
Operation
Variant without GRA
A Activate limiter (control inactive)
Deactivate limiter
Interrupt control (sprung position)
B Resume control 1)
/Increase limitC Start control with current speed/Reduce
limitVariant with GRAA Activate GRA (condition for the subsequent
activation of the limiter).
To activate the speed limiter , press button D
or
E
.
Deactivate limiter
Interrupt control (sprung position)
B Resume control1)
/Increase limitC Start control with current speed/Reduce
limitDDepending on the equipment:
Switch between GRA and speed limiter
Or:
Show menu of assist systems - Possibility of
switching between GRA and speed limiter
Switching to GRA interrupts the control.
EShow menu of assist systems - Possibility of
switching between GRA and speed limiter
Switching to GRA interrupts the control.
Adjusting the speed limit with the buttons
B
and
C
By pressing in steps of 1 km/h.
By holding in steps of 10 km/h.
1)
If no speed limit is set, the current speed is set as the speed limit.
129Driver assist systems