clock reset SKODA SUPERB 2007 1.G / (B5/3U) Rhapsody Car Radio Manual

9
CONTROLS AND EQUIPMENT
Note
lThe CLOCK function is only available in certain
countries.
l We recommend that you set the clock using
the automatic function.
If the time, however, is not identical with the
time shown by the TP station, it should be set
manually.
GALA
As road speed increases, the noise level in the car
increases accordingly. In the past, radio volume
had to be adjusted manually.
GALA (Speed dependent volume control)will now
automatically adjust the volume in accordance
with road speed.
The GALA function can be set to meet your indi-
vidual requirements:
l Select in the menu: GALA. „GALA“ appears in
the display with a settings bar.
l Briefly press the the SCAN knob 10 and select
the required value using the SCAN knob.
We recommend that you make the basic volume
settings whilst the vehicle is stationary and to
make the GALA settings whilst the vehicle is in
motion. If the basic volume has to be reset (when the sta-
tion or CD is changed, for example), simply adjust
the rotary/press knob
1. The volume adjustment
will continue to function automatically.
ON Volume
The maximum volume level of the radio upon
switching on is set using the ON Volume value:
Normally, the last setting for the volume will au-
tomatically be used when the radio is switched
on. If, however, that value is greater than the ON
Volume value, the volume when switching on will
automatically reset to the ON Volume value.
l Select in the menu: ON Volume.
„SETUP ON Volume“ and a settings bar are
shown in the display.
l Briefly press the SCAN knob 10 and select the
desired value using the SCAN knob.
PHONE
It is possible, using the PHONE function, to set-up
the system to enable a telephone conversation to
be heard over the loudspeaker system, if a mobile
phone has been installed.
l Select PHONE in the menu.
„SETUP PHONE“ appears in the display with the
function currently selected. Muting telephone conversation
l
Select „Mute“ using the SCAN knob if you wish
to mute the radio. The telephone conversation will
not be relayed via the radio loudspeakers.
Telephone conversation relayed via the loud-
speakers
l Select „Hands-free“ from the menu using the
SCAN knob if the telephone conversation is to be
relayed via the radio loudspeakers.
RDS name
Some stations also transmit running advertising
and information text along with the station name
in the display.
Using the RDS name function for stored stations
you can decide if these texts should be shown
or not.
l Select in the menu: RDS Name.
„SETUP Name“ and the current value will be
shown in the display.
l Press the SCAN knob 10 briefly and select the
required value using the SCAN knob. The text can
be switched on with „VAR“ and off with the value
„FIX“.
Note
Please ensure that the station name is always
displayed when storing.